Forged and fabricated Stake Anvil
Рет қаралды 33,817
3 жыл бұрынThe first 1000 people to use the link will get a free trial of Skillshare Premium Membership: skl.sh/blackbearforge02211
A stake anvil or stump anvil can provide additional working surfaces and shapes not readily available on a larger blacksmiths anvil. In today's example I forge the pieces of the stake then assemble by modern welding techniques as opposed to the more traditional method of forge welding.
The final stake is"
6.8 pounds
7" tall from the collar
9" long with a hardy shank of 1 1/4" x 5"
This video was sponsored by Skillshare
My name is John Switzer, I operate Black Bear Forge, a small one person blacksmith shop located in southern Colorado. My current focus is shifting away from commissions and customer orders and towards education through these videos on KZfaq. Thank you for watching
Combat Abrasives - bit.ly/3r73P8d
Use code "Blackbear10" for a discount on your next order
New anvil coming soon from:
Fontanini Anvil and Tool - USA manufacturer of new blacksmithing anvils
To provide financial support use one of the two links below.
www.paypal.me/BlackBearForge
Or you may set up a monthly contribution through Patreon
/ blackbearforge
Mailing address:
Black Bear Forge
P.O. Box 4
Beulah, CO 81023
If you are curious about some of my other interests, you may like my second channel
John Switzer
/ @johnswitzer
Find me online at:
www.blackbearforge.com
www.blackbearforge.etsy.com
/ blackbearforge
/ black-bear-forge-20986...
Below you will find useful links that will help you in your journey as a blacksmith.
My blacksmiths apron
www.Forge-Aprons.com use code BBF
RZmask 99.5% dust mask
rzmask.com?afmc=ay
To find more information in blacksmithing in the US or to search for your local ABANA affiliate group visit.
www.abana.org/
Blacksmithing tools and supplies
Self contained air hammers - www.saymakhammers.com/
General blacksmithing supplies - www.oleoacresfarriersupply.com/
General blacksmithing supplies - www.piehtoolco.com/
General blacksmithing supplies - www.centaurforge.com/
General blacksmithing supplies - www.blacksmithsdepot.com/
General blacksmithing supplies - www.blacksmithsupply.com/
Square head bolts and lags - www.blacksmithbolt.com/
New anvils - www.oldworldanvils.com/
New anvils - www.nimbaanvils.com/
New anvils -
Industrial supplier - www.mcmaster.com
Tong blanks and tools - kensironstore.com/
Fire brick and refractory - refwest.com
Most of my videos are shot on the Canon M50
adorama.evyy.net/NEnJV
Audio is recorded using the RodeLink Filmmaker Wireless Microphone Kit
adorama.evyy.net/g5vXA
Blacksmithing and related activities can be hazardous. These videos are not a substitute for competent professional instruction. Your safety is your sole responsibility. Always use appropriate safety equipment including eye and ear protection when working in the shop. Follow manufactures safety guidelines for the use of all equipment. In the event something shown in one of these videos seems unsafe, it is up to you to make the appropriate changes to protect yourself.
@BlackBearForge 3 жыл бұрын
The first 1000 people to use the link will get a free trial of Skillshare Premium Membership: skl.sh/blackbearforge02211
@patcarlson1277 3 жыл бұрын
"....Just because you own a welder, doesn't make you a welder " Words of wisdom. Thanks John.
@dominickhyatt1478 3 жыл бұрын
It’s so refreshing to see a man, just a regular man named John.
@tomasmerino1039 3 жыл бұрын
A grinder and paint makes you the welder you ain't lol
@pjamestx 3 жыл бұрын
Me: needs a tool, makes a small drift John: needs a tool, makes AN ANVIL
@BigHat83 3 жыл бұрын
Nice of you to mention Doc. His channel is cool and may now get more traffic due to your shout-out...
@BlackBearForge 3 жыл бұрын
I hope so!
@AROAH 3 жыл бұрын
I’ve been a casual enjoyer of smithing content, and this is probably my favorite channel so far. Gives me really strong nostalgia for This Old House and other sort of handyman shows from when I was a kid. I also had no idea power hammers existed, but I love it.
@clarklindquist8137 3 жыл бұрын
Nothing wrong with using modern and traditional techniques. Thanks for showing both
@donnarhill1932 3 жыл бұрын
LOVE the power hammer!! My guess is that the majority of the “haters” are just jealous 🤪 they don’t have one, I know I’m jealous!! LOVE your videos 🚂
@shadetreeforge 3 жыл бұрын
Yes I'm jealous that I don't have one ! But it doesn't mean I'm a hater over 30 + years running big hammers and presses, miss it even though I'm no longer in shape to run them anymore! Something about controlling a machine like that!
@dgtlmoon 3 жыл бұрын
John - a tip about grinding belts - everyone on youtube seems to be obsessed with ONLY grinding with grinding belts, that slag is always harder than any belt, so just zing over it first with a decent grinding disc before using the belt, i dont understand why everyone on youtube is obsessed with always using grinding belts - same goes for using sanding discs on the grinder, hit it first with a grinding disc
@reigninoel 3 жыл бұрын
Nice shoutout to Doc's Hotshop and Forge, a very cool small channel that needs some love.
@mandomann8411 3 жыл бұрын
At the start of today, I'd never have guessed it would bring me here. Very good watch
@RalfyCustoms 3 жыл бұрын
Fantastic work John, I've worked in Fabrication since I was a teen, now 40 years later I'm seriously being drawn to smithing
@waynemitchell8254 Жыл бұрын
“Power Hammer hating”sounds like a young man’s game 😂
@dustyroads5753 3 жыл бұрын
I have some live traps I built over 20 years ago with concrete rebar frames welded with 6011 rod. Not 1 weld has ever broken. I even ran over 1 with a tractor I had forgotten down by the pond, hidden in tall grass I was brush hogging. believe it or not the rebar bent all up but the welds stayed intact 😂. First welding project I ever attempted, and now I would have used bar stock not rebar.
@flameboy7265 3 жыл бұрын
“If wishes were horses, beggars would ride” as my gran used to say John. You need to do the forge welded version soon or you’ll get to the end of it and say, ‘with all the time and effort I’ve put in, maybe welding would have been faster after all’😁 Great video as always, so calm and reassuring. I bet you could get chased through your woods by an swarm of angry wasps yet still be calm and positive throughout.👍
@bobvines00 3 жыл бұрын
John, the next time you need to upset a shank like this one, try welding the collar onto it first, then let the anvil hold the shank steady when hammering. That might be less aggravating than the shank bouncing around, I think. I'll also go check out Doc'sHotshop & forge to see his build!
@tomasmerino1039 3 жыл бұрын
I would have done it the other way around... I mean the hot part against the anvil... Don't know why but I feel it would be easier
@michaelhayes1678 3 жыл бұрын
Thanks for sharing! Beautifully made Bick-iron/post anvil! Also, it's not the tools that make the blacksmith, but the smith that makes the tools. Please always feel free to use whatever materials, tools, and skills you have at your disposal. You always make great videos, and I always enjoy your work.
@BlacksmithTim 3 жыл бұрын
For the first upset, I've done similar on several occasions with a plate on the floor. "Upsetting plate" I've heard it called. Forget where I got the idea from. Picked up a disk about 10" round by 1 1/4" thick that sits on the floor adjacent my forge. Thumping the heated end down onto the plate letting the weight of the piece and the distance of the drop do much of the work goes pretty slick. I'm not a power hammer hater -- and, yes, envious but my shop simply doesn't have the floor that would tolerate a power hammer -- so I have picked up other tricks. I also tend to work a short bevel all around the end to be upset, seems to keep things straighter and the upsetting seems more efficient. Always enjoy your work and get many ideas.
@BlackBearForge 3 жыл бұрын
Leaving the bar long and upsetting on a block would have been much easier. I have several blocks just for that purpose and keep meaning to mount on permanently next to the anvil
@normalcitizen_1 3 жыл бұрын
Great video, I have a Idea for a future video “Making a caltrop” I’m 16 turning 17 this year and you have greatly inspired me getting better at smithing, damage prevention and technique. Bless you and your wife from Sweden 🇸🇪 and keep on hammering
@FeatherHorseforge 3 жыл бұрын
Looks awesome John, doc has certainly put some effort into his post anvil.
@christopherpatrick2343 Жыл бұрын
Great
@armandhammer7642 3 жыл бұрын
I would love to be friends with a blacksmith. I'm a carpenter but there's always the odd tools and do-dads I'd like to make. I wish I had a 2 week access to a blacksmiths shop. You're a pretty good teacher and I like the fact you show your mistakes as well. The world won't end if you make an error. Good videos and good work sir.✌
@Zogg1281 3 жыл бұрын
As you said at the beginning of the video, this was a bit of a trial and you wanted to work out what gorge welds would be best to use etc., so don't worry that it was partly fabricated. It looks great and you will be able to see if you like the shape and we get to look farward to a more traditional build in the future 😊👍
@hurstbill 3 жыл бұрын
i'm the same..the best part of my welder is my hand grinder..lol
@christiankaiser444 3 жыл бұрын
Hallo, schönes Video und gut gemacht du wirst sicherlich viel Freude an deinem neuen Werkzeug haben
@paulorchard7960 3 жыл бұрын
Thanks John, nice tool!
@MrDukaman 3 жыл бұрын
NEW ANVIL. looks awesome.!!!!! Congrats …..Paul 👏👍🔥⚒🇺🇸
@3870TheDad 3 жыл бұрын
Another great teaching video, John. Thanks
@gurvinderkau1e5w18 3 жыл бұрын
Love watching hot metal beaten up under power hammer so satisfying to see. Stake anvil came out so cool👍👍🔥🔥🔥
@rb8165 3 жыл бұрын
Just saw your 63rd birthday video on another platform. Not sure when it was dated but happy belated birthday sir!
@BlackBearForge 3 жыл бұрын
Thanks! A little over a week ago now
@olddawgdreaming5715 3 жыл бұрын
Great job John, really enjoyed watching you make this anvil. Turned out great. Fred.👍👍👏🏻👏🏻
@wesskaggs3883 3 жыл бұрын
Great tool and video! Can't wait for the new anvil video.
@BlackBearForge 3 жыл бұрын
Coming soon!
@grandadz_forge 3 жыл бұрын
Looks like a fun project goal for my list. Nice work!
@jjppres 3 жыл бұрын
Well done John. It came out looking real good. I saw you had commented on Doc's video. He does a lot of forge welding. I can't believe some of the things I see him forge weld together. He is good at it.
@BlackBearForge 3 жыл бұрын
He is really a very good smith and not afraid to tackle tough jobs.
@ChirpysTinkerings 3 жыл бұрын
Looks good, and doc's videos are really good, and he really gets into some interesting projects for sure.
@SchysCraftCo. 3 жыл бұрын
Very nice project great video and job. Keep up the great craftsmanship and hard work John. Forge On. God Bless.
@johnjude2685 3 жыл бұрын
I do enjoy anything Blacksmith with you teaching Sir, Thanks and when my two pieces of steel bond and never separate I call it welded. Thanks for the teaching,Sir.
@nathanlundell1616 3 жыл бұрын
Always a pleasure to watch you work sir
@thecreativecraftingtable8658 3 жыл бұрын
Quality work as always! Thank you for sharing your knowledge!🙂
@ulfhedtyrsson 3 жыл бұрын
You have one of the many profile pics I use. Smirky wolf
@Joe___R 3 жыл бұрын
Do you have a block or jack you can put under your hardy hole so you can put the bar into it to help hold it to reduce the bounce & just keep it from moving around while you are hitting it. A screw jack would probably work best for the adjustability and it would be more solid since it doesn't have a cushion of hydraulic oil under it.
@BlackBearForge 3 жыл бұрын
Interesting idea.
@ValhallaIronworks 3 жыл бұрын
It came out awesome, John!
@TheArtofCraftsmanship 3 жыл бұрын
Awesome video! That’s a great tool and outcome.
@RRINTHESHOP 3 жыл бұрын
Nice job John, Enjoyed. I also follow Doc.
@NeilGraham.I.M.F 3 жыл бұрын
That is a nice piece good-looking as well something that I been wanting to make when I get the opportunity
@frankgaletzka8477 3 жыл бұрын
Hello John Thanks for the Video The tool you make is a fine one nothing you get bored of . Take care a good new week Yours Frank
@robertcutburth3745 3 жыл бұрын
Good one, I'll have to check out that other site.
@CallSignGlitch 3 жыл бұрын
Happy belated 63rd birthday from the ifunny crew
@BlackBearForge 3 жыл бұрын
I assume ifunny posted something of mine but I can't find it. Do you happen to have a link
@CallSignGlitch 3 жыл бұрын
@@BlackBearForge ifunny.co/video/cBVmrl9Q8?s=cl there you are sir. Thank-you very much for the response. I hope you have a wonderful weekend. Be safe and stay healthy 😀
@Smallathe 3 жыл бұрын
Very cool DIY! :)
@OuroborosArmory 3 жыл бұрын
I say this so many times with your videos... I need to make one of these
@davidknight1612 10 ай бұрын
Yeah I just watched doc's on that, it was frustrating!!
@angelopedretti83 3 жыл бұрын
Sweet!
@hannemannironworks1651 3 жыл бұрын
looks great John I just made a bic myself was a decent project
@BlackHoleForge 3 жыл бұрын
I was making a tool for my Hardy hole and you give me some advice. Putting that bevel in that collar really helped. Just wanted to say thank you
@BlackBearForge 3 жыл бұрын
Glad I could help
@danbreyfogle8486 3 жыл бұрын
I shined up real nice John, great little project, or maybe not that little...
@LincolnRig 3 жыл бұрын
Another project very well done! It could also double as a man sized chipping hammer... for that stubborn flux
@billhatcher2984 3 жыл бұрын
I realy enjoyed this one and eaven though you are not a pro welder I would have watched to see how you did and how you fixed any mess ups
@andreasostensson5747 3 жыл бұрын
Great video. I liked the voice over, but I wouldn't mind se some amateur velding as well. I find it more educational if I'm watching some one who makes small mistakes and correct them, then watching a expert doing something flawless.
@stoneinthefield1 3 жыл бұрын
Use that power hammer you are a professional blacksmith. Im sure those guys moving dirt for a living are using a loader and not just a shovel. Pro use the tools they need to get the job done. Love the channel John.
@KingLoopie1 3 жыл бұрын
The only reason I wouldn't like you using a power hammer is because I'm jealous... I don't have one! Waaaahhhh! Man my neighbors would hate it if I did...! Use what ya got! It's all interesting! 👍
@xoxo2008oxox 3 жыл бұрын
I want a powerhammer BECAUSE of my neighbors... I would just hit metal till 9:59pm ...
@clarklindquist8137 3 жыл бұрын
The power hammer is sure a blessing here
@justinkirck6137 2 жыл бұрын
Legit question- why wouldn't you upset the bar by placing the hot part on the anvil and hammering the back? Using the rebound and force up from the anvil to assist in the shaping, and not losing the bounce energy...
@jjbode1 3 жыл бұрын
I can imagine very well, but I'll ask instead: Why does anyone "hate" a tool like a power hammer. We should all learn not to hate. It's infectious.
@BlackBearForge 3 жыл бұрын
Some feel its not true to the craft (even though big water powered hammers were in use hundreds of years ago) and some only want to see things done using the same type of tools and equipment they have in their own shop.
@TheBottegaChannel 3 жыл бұрын
Lovely stake anvil, and if needed awesome unique style of cross pein hammer if push comes to shove. Makes me wonder if you could have used a band saw yo split a peice of bar stock down the middle then forge it from a T shape so it could be all one peice.
@BlackBearForge 3 жыл бұрын
I have seen it done, but it seems very likely to leave cold shut on the inderside
@kenkaneki7675 3 жыл бұрын
Thank you ifunny
@BlackBearForge 3 жыл бұрын
I assume ifunny posted something of mine but I can't find it. Do you happen to have a link
@kenkaneki7675 3 жыл бұрын
@@BlackBearForge sadly I don't have the link but it was you talking about your anvil so I thought I'd check you out, I love your work. Keep up the great work, if I find the link I'll send it to you.
@garygraham2974 3 жыл бұрын
Hi you could drill a hole in the bick and shaft put a steel rod and then weld it solid
@tyshufelt5299 3 жыл бұрын
Put in the swage block and hammer it
@Larks01 3 жыл бұрын
Thanks John, another great video and very timely for me - I’ve been planning on making one of these myself. In hindsight do you think it’d make it any easier to upset the top if you weld the Hardy hole stops on to the shank at the very start to hold the shank in the Hardy hole while you upset it?
@EduardoSVA 3 жыл бұрын
It does not mater if you use the hammer or the power hammer: Your job are great all the time! Keep forging! Greetings from Brazil!
@BlackBearForge 3 жыл бұрын
Thank you very much!
@draven3838 3 жыл бұрын
Use what ever tool gets the job done
@livelearn4974 3 жыл бұрын
I understand the desire to "do it like a blacksmith," and give it an authentic hand forged feel. But, I think some that complain about powerhammers, welders, possibly even grinders, need to realize "authentic blacksmiths" from before welders, hand grinders, powerhammers and the like, would have built them, if they could. Blacksmiths were the cornerstone of progress....making new tools to make jobs easier. Isn't that how we went from beating a hot bloom on a rock, with a rock, to using a hammer and anvil, instead? Hahahahahaha
@douglasfathers4848 3 жыл бұрын
Really enjoyed watching the power hammer John should use it more often. Made mine with an old hammer head not as good as yours but serves me well. Looking forward to seeing it in use I'm shore it will be a very helpful tool. :)
@dragonstonegemironworkscra4740 3 жыл бұрын
VERY neat project Sir. Have plans to make 2 ea of 2 different styles. Been talking with Mr Rob Robbinette about it. ⚠️Scrap smith warning⚠️ ⚠️ LoL I aquired a mono leaf leaf spring from a 18 wheeler truck. 2.5 x 3.5 stock most likely to be in 5160 class. Think it'll make a good bicker. Would be a kuul project any how
@zeljkomarinkovic745 3 жыл бұрын
"To all you power hammer haters" hahah as a power hammer hater myself i know that only people who dont have power hammer hate it. Awesome project by the way
@S8tan7 3 жыл бұрын
"A grinder and paint makes me the welder I aint"
@gregwexler4702 2 жыл бұрын
This is excellent. All I’ve seen for sale are cast outta Taiwan🤨🤨Thanks
@Redneckemtb 3 жыл бұрын
Cool looking tool! I have a couple questions, would it have been easier to upset the first piece by quenching the bar and leaving the last inch or two hot the putting the hot side to the anvil and beating on the cold? Second would it be worth while to fabricate something to keep the tool from bouncing around or out of the hardy? Keep up the good work and we'll keep watching.
@Volundur9567 3 жыл бұрын
I would love to buy one of these little guys from you.
@BlackBearForge 3 жыл бұрын
I’m afraid its not something I make for sale.
@Joe___R 3 жыл бұрын
The link to your second channel doesn't work in the description area.
@billwoehl3865 3 жыл бұрын
I'm not a welder either, but, that's why we buy grinders and sand paper 😁
@shortfuse43 3 жыл бұрын
As one old welder once said..."Never weld more in the morning than you can grind off in the afternoon"
@jamesbarisitz4794 3 жыл бұрын
Looks like a shoemakers last for a slender foot. ✌
@kevg3320 3 жыл бұрын
Great vid as always John. Question for you though:- Any reason when you upset, you had the hot/upsetting end upright and hitting direct with the hammer, instead of having the hot end on the anvil and striking the cold end? Regards from the UK.
@BlackBearForge 3 жыл бұрын
Mostly to keep the anvil from cooling the work too much
@kevg3320 3 жыл бұрын
@@BlackBearForge That makes so much sense, and obvious too. Thanks.
@dwayneburbridge3283 2 жыл бұрын
Quick question: since the post was mild steel, why not cool all but the top few inches before going to the press?
@travisbrenneman9262 3 жыл бұрын
I will start by saying that I'm not a blacksmith. YET. I am one of the youngest people to pass the AWS CWI test. I am impressed by your work. I think that it would be easier to use a fullering die to widen the stump of the anvil without as much extra work maintaining the width of the post. This will give you really good gussets without the extra forging time and costs. Thank you for all that you provide to us,the public, with your content.
@hedge685 3 жыл бұрын
Grinding and paint make me the welder I ain't...in the words of another semi-famous KZfaqr...lol
@algordon5843 3 жыл бұрын
Hi John Another great vid. That idea of keeping snow outside your workshop for quenching etc seems really good but I dont think its likely to catch on here in Australia. BTW I liked the music in the closing part of the video but couldn't find a reference to it. Any chance a link please? Thanks
@BlackBearForge 3 жыл бұрын
The music was Pembroke Pines by Walt Adams. It is sourced through Epidemic Sound which is a subscription service. www.epidemicsound.com/music/search/?term=pembroke%20pines Without an account, the link may not work
@algordon5843 3 жыл бұрын
@@BlackBearForge Thanks for the quick response Mate. Its appreciated. As is all of your output. Alistair
@threeriversforge1997 3 жыл бұрын
I swear I saw someone make a similar stake anvil by upsetting the end like you did, then forging it into a shouldered tenon so it could be riveted into the mortise through the top piece. The whole thing was then forge-welded solid. I don't know if it was then topped with a piece of high-carbon alloy, but I think that would have been easier than using a solid chunk of high-carbon alloy for the top piece. Wonderful build, though. I have a stake similar to that and have been waiting on a buddy of mine to send me a piece of grader blade for the top. Like you note, it'll always look like it was welded up with a stick welder, but it's a tool to get the job done and I can always give the "hard way" a try on the next one!
@BlackBearForge 3 жыл бұрын
I have seen that done and would probably try that for an all forged version
@threeriversforge1997 3 жыл бұрын
@@BlackBearForge Watching Doc's videos now. Wow, does that guy got some moxy!
@andizell2255 3 жыл бұрын
Very good video! I'm curious, are you going to make a video about your new anvil? Have a great sunday, cheers Andy
@BlackBearForge 3 жыл бұрын
That will be next weeks video. Maybe I'll do a short teaser in a few days
@andizell2255 3 жыл бұрын
@@BlackBearForge Thank you for answer! Looking forward to this video!
@Volundur9567 3 жыл бұрын
Still a nice bickern.
@Joe___R 3 жыл бұрын
If you have a problem with this old man using a power hammer every now and then, you got real problems in your head. I am sure you can find a historic blacksmithing channel if you really have that much of an aversion to power tools.
@billhatcher2984 3 жыл бұрын
One more ? Do you like the belt sander for rough stock removal better than a 9 in grinder?
@BlackBearForge 3 жыл бұрын
I have never really done a side by side test. I'm just in the habit of using the belt grinders.
@shadetreeforge 3 жыл бұрын
Depending on how that fish mouth turns out it could make a decorative rivet header?
@BlackBearForge 3 жыл бұрын
I'll try it again for that purpose. But if I want it to come out that way it probably won't
@OldPumpMan 3 жыл бұрын
I was wondering how you like that evolution chop saw now you've had it for a bit, is it a good saw & worth the price?
@BlackBearForge 3 жыл бұрын
So far its been great and it still has the original blade in it.. Of course it isn't a tool I use every day, So if you use a saw lots, the blade is bound to wear out sooner
@laragwen102 3 жыл бұрын
I've searched through your videos using the propane forge and haven't found an answer to a pressing question. When forge welding in the propane forge. Does the flux eat up the insides of your forge? How do you protect the forge from the flux? Is this a pressing problem? I've avoided forge welding attempts in my propane forge for fear of the effects of flux on it. Thanks again for your great videos.
@BlackBearForge 3 жыл бұрын
Flux can be very hard on the floor of a gas forge. My current forge uses hard fire brick and is holding up better than most kzfaq.info/get/bejne/ftt2i8uKt5PadJc.html
@laragwen102 3 жыл бұрын
@@BlackBearForge Thanks for your reply and for the link to the video. I'm not sure how I missed that. It answered my question in great detail. Thanks again.
@andystoolbox 3 жыл бұрын
If you had a tig welder you could have used 4140 filler rod but I imagine you would rather forge weld it anyway. Lol great mock up!
@BlackBearForge 3 жыл бұрын
TIG would be ideal, but my TIG skills are not up to the task
@humancattoy7767 3 жыл бұрын
Question. Would a softer working surface reduce the rebound of that mild steel?
@BlackBearForge 3 жыл бұрын
yes, but it would also reduce the amount of energy going into the work
@edep3970 3 жыл бұрын
How do you like that power hammer I’ve been looking at getting one and don’t know if I should buy new or old
@BlackBearForge 3 жыл бұрын
The Say Mak has been a real game changer and I am very glad to have it
@kalifammm 3 жыл бұрын
Hellou good man... can you make tuatahi racing stile axe?? I tryed this 10 times and i cant make a good axe like this
@TheWoodsmanMilling 3 жыл бұрын
I don't understand why people don't like powerhammers. I find them quite interesting, but I would like to find an old steam hammer to use or take apart to learn more about. Those old things were engineering marvels back when they were first produced.
@marcerivest6204 3 жыл бұрын
It turned out pretty good, l made a smaller shorter one last year and made it totally out of O1 tool steel. It took me a long time but l think that it was worth it. I never thought of fabricating it. Also, what rod did you use for the mixing of metals. In my previous job we used a 707 certainium rod.
@BlackBearForge 3 жыл бұрын
it was just 7018 because its what I had on hand.
@marcerivest6204 3 жыл бұрын
@@BlackBearForge thanks for sharing that information. I like knowing what works. With your preheating and tempering it should last for a long time.
@louisaziz1235 3 жыл бұрын
That's something that I will attempt to make. A question, if it's alright... I have been gifted several mower blades. Will heating to temp, coating with charcoal dust, folding ( a'la Japanese sward smith), and forge welding add enough carbon to make a descent blade ? Just something I've been thinking on.
@BlackBearForge 3 жыл бұрын
I can't really say. Its not a technique I have ever tried
@Newberntrains 3 жыл бұрын
For the power hammer haters they can kick sand your shop you work the metal with what u got and most are jealous cause they don’t even have a forge. 😄. I’m using a 55 gallon drum and crank blower from below I mostly work copper rod so the fancy centaur forge rigs would be overkill 🙂
Nicks creative stuff
Рет қаралды 2,3 М.