Forklift Jo Basic Pull and Load Pallets

Рет қаралды 44,851

Forklift Joe

Жыл бұрын

Пікірлер: 81

@shaylanewlife Жыл бұрын

Forklift is one of the best job i ever had i swear i love it ... way better than production.😊

@forkliftjoe3620 Жыл бұрын

Facts💯

@AS_ONYX Жыл бұрын

Yes it is I treat it like a real life video game (go around the warehouse and find the correct pallets, then load them in, and onto the next.) A simple but fulfilling job where you can feel proud of what you did that day. That’s what made it so fun to me. Plus it made time fly!

@shaylanewlife Жыл бұрын

@@AS_ONYX So true 💯💯💯

@forkliftjoe3620 Жыл бұрын

@@AS_ONYX I agree %100

@hakeemsd70m Жыл бұрын

Absolutely, I even prefer sit down to the reach truck! What a rewarding career. 😎

@OnewaySkreet Жыл бұрын

Thanks bro just got a job paying 18 an hr first time forklift driver and your vids are helping bro i have way more confidence now before my actual start date lmao salute bruh 🤝🏾

@juandodd3463 11 ай бұрын

I start tomorrow how did you do? Never touched a forklift in my life ?

@RickTheBoss98 4 ай бұрын

Is that $ or £

@CL__01 11 ай бұрын

This has been very helpful for me bro, Love your content👍

@ViinYardOnDope 10 ай бұрын

Yes thank you bro !! I’ll most definitely be watching these video’s tonight

@laurazavala3855 Жыл бұрын

Awesome videos!

@hakeemsd70m Жыл бұрын

This was very enjoyable to watch. You're very swift, clean, and precise with your movement of pallets and maneuvering the lift. Great video bro. Toyota Forklift? I reconize that 4y engine whine. My baby that I use at work when I go outside to pick in the yard, and when I load in my pallets onto the truck at the end of the day.

@forkliftjoe3620 Жыл бұрын

Yes Sir that Toyota

@hakeemsd70m Жыл бұрын

@@forkliftjoe3620That's wassup. I'm still a rookie on the forklift, just a month into both the sit down and reach truck, but I can feel myself slowly getting better. I hope to be at your skill level someday, sir.

@Battleaxegunner Жыл бұрын

I currently work for DHL Supply chain at a reefer warehouse, and we use Electric Toyota Stand up forklifts. I work 10 hour shifts (6AM-4PM, Mon-Fri and some OT's on the weekends). I can see your single pinwheeling those pallets in the trailer. Whenever I load very big trucks (45 to 60 pallets), depending if they need to be double stacked, most of the time they go in double pin-wheeled if its a 60 pallet truck for a 53 ft trailer. Sometimes when we load the low cube trucks, we have to switch back and forth with the Low Mast lifts to load in the pallets and continue with the larger ones. I'd rather load trucks then unload to be honest.

@forkliftjoe3620 Жыл бұрын

Same here bro but I don’t want to be the one picking the order. Pin-wheeled 60 pallet tough bro especially if they over hang on pallets. Do y’all ever have over hang freight that’s longer than the 48 size pallet?

@Battleaxegunner Жыл бұрын

@@forkliftjoe3620 It depends if their on white wood heat treated pallets. Most of the time we have the products on PECO pallets.

@femtonaren4811 5 ай бұрын

Thanks for the inspiration to make move videos!

@elishown4963 2 ай бұрын

Working on getting certified. just wanted to say jo your videos have gave me confidence to get into being a forklift operator. Anyone got advice for me?

@jaykumarpatel571 5 ай бұрын

I heard super men but you are real super forkliftmen for sure ever..

@forkliftjoe3620 5 ай бұрын

Thanks 💯💯

@Szotowiec 11 ай бұрын

well done bro

@felixlawrenta9372 Жыл бұрын

THANK YOU MY dear brother ❤️

@lincejoshua7071 Жыл бұрын

You should start a forklift school. It will be gr8 if you could teach on a Toyota forklift, a Raymond reach truck and a Raymond Order picker on KZfaq.

@elizabethann3933 5 ай бұрын

It looks like the Amazon Factory I used to work at but when I was a Waterspider in the returns department I had to use the pallet jacks to bring the pallets of ups boxes back to decant and I had to lift the boxes one by one off the pallets and rip them open with a boxcutter to build a pallet with yellow totes and fill the totes with small jiffy bags and boxes and hand them out to the workstations

@stevesmith-wc2gb 11 ай бұрын

I have operated big telehandler forklifts

@elkanahgray9810 4 ай бұрын

entry level forklift driver...he is so good...still worried I will take too long, but i don't want to drop a load...

@gathobeevens2644 Жыл бұрын

VERY EDUCATIONAL !! THANKS AND BLESSINGS!!!

@forkliftjoe3620 Жыл бұрын

Thank you my friend

@tule8669 4 ай бұрын

How do i go fast with forklift lifts and drops?

@pierrerichardaltine1739 Жыл бұрын

Good bro

@forkliftjoe3620 Жыл бұрын

Thanks💯

@boxxer3358 11 ай бұрын

Tips on avoiding accidental drops tips or something along the lines ?

@aidanferguson 11 ай бұрын

Keep your load as low to the ground as possible and use tilt

@user-gp7uj2dv3l 5 ай бұрын

greetings from Russia colleague

@paolopierri3774 Ай бұрын

What camera are you using ?

@ainebyoonaonesmus Жыл бұрын

✊🏾

@forkliftjoe3620 Жыл бұрын

Thanks💯

@night7185 Жыл бұрын

i start forklift on friday, 84 hour weeks till november 😭

@hakeemsd70m Жыл бұрын

Wow, what industry, if you don't mind me asking?

@night7185 Жыл бұрын

@@hakeemsd70m canning vegetables

@hakeemsd70m 10 ай бұрын

@@night7185Awesome. How's it been on the forklift and on the job?

@fdadventures225 10 ай бұрын

Sup dude so do you work in shipping and receiving? I’m going to start a job on Tuesday and haven’t used a sit down forklift or haven’t done shopping and receiving . Any advice ?

@forkliftjoe3620 10 ай бұрын

Bro watch all my videos you’ll be very confident when you walk in the door

@LussotheG 3 ай бұрын

I have trouble with pallets its hard to see and i always chip them up

@randomshit1645 3 ай бұрын

Are you the only driver on your shift?

@procrastinator6902 Жыл бұрын

Help please. I've driven a forklift before and had no problems but I'm now driving a large closed cab 36,000 lb one and am having an issue. Trainer is honestly a bit of a jerk and is no help. I pick up packs of lumber off a chain conveyor, no pallets. However every time I pull up to grab a pack, my backrest is hitting the pack of lumber before the forks are completely under the pack and I'm not getting the pack all the way to the heel of the forks. I cannot push against the pack to square up because it comes down a set of 4 chains and will roll backwards (To picture this, imagine 4 escalator rails 4 feet apart with chains instead of the rail...this is what the lumber pack comes down). Since I have plenty of space beneath me to come up from (about 3 or 4 feet instead of a few inches like the space inside a pallet) will lifting up with my forks tilted back slightly while I'm coming in help to ensure I'm hitting the heel of my fork? I can't think of anything else to do. The reason this is a big deal is bc these packs are 96 in front to back but due to past damage and the forks being ground back, the forks are only about 93 or 93.5. Meaning on packs of boards like 2x4s, if you aren't as far back against the heel as possible then your forks don't pick up the bottom board at the back of the pack. Which is a problem for the stacker operator bc he then has to pick up the board, sometimes 20 ft long, and add it to a pile. Once or twice is OK but doing that all day out in 100⁰ weather and he starts getting ticked off on top of me already being frustrated with myself. Please any ideas or suggestions are much welcome!! And I can explain better if necessary.

@forkliftjoe3620 Жыл бұрын

Yes if your tilt slightly and have forklifts completely level u should be able to enter cleanly and lift with stability

@procrastinator6902 Жыл бұрын

@forkliftjoe3620 That took care of it, thanks. I took a close look at those forks this morning and not only are they short but the last foot or so on them is bent upwards at about a 95⁰ angle instead of a flat 90⁰ so I had been tilting forwards to make the ends level not realizing I was actually tilted at a forward angle. They're also lopsided, left one sits about 3 inches lower than the right. I'm gonna have to talk to management bc they gotta replace those forks! They not only make the job harder but also dangerous.

@DaleBouwman 9 ай бұрын

Is that cold storage you work in?

@forkliftjoe3620 9 ай бұрын

No it’s a regular warehouse

@lookherelooklisten7850 10 ай бұрын

How do you know exactly which pallet to pick?

@forkliftjoe3620 10 ай бұрын

Locations are on the floors and racks of most warehouses I just double check the quantity and item number

@tammyhicks5398 3 ай бұрын

Please show the gears more.

@AS_ONYX Жыл бұрын

Is this a cross-dock warehouse?

@forkliftjoe3620 Жыл бұрын

Yes it is my friend

@smf851 Жыл бұрын

Hi Joe. Please forgive my naive question, but do you ever worry about goods being damaged by stacking one pallet on top of another?

@forkliftjoe3620 Жыл бұрын

Yes space is everything but when I’m you run out or just want to consolidate stacked shrink wrapped pallets that can be stacked safety is the way to go.

@smf851 Жыл бұрын

@@forkliftjoe3620 Got it. Thank you. Appreciate your time.

@forkliftjoe3620 Жыл бұрын

@@smf851 thank you for asking question I’m here to help

@leonperkins3604 Жыл бұрын

Is that battery operated or petrol

@forkliftjoe3620 Жыл бұрын

Petrol my friend

@leonperkins3604 Жыл бұрын

@@forkliftjoe3620 we use battery

@leonperkins3604 Жыл бұрын

Would be great to connect over social media

@forkliftjoe3620 Жыл бұрын

@@leonperkins3604 my instagram is @jo_bucks89 SC: Jobucks89

@rasakomotosho6888 Жыл бұрын

Pls send your location, im Newark NJ

@forkliftjoe3620 Жыл бұрын

Chicago

@dieudonnezacharie-xt4rv 11 ай бұрын

❤️❤️⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐⭐

@MalikNadeem73 5 ай бұрын

Bro also I am Forklift operator I have 13 year experience for loading unloading with Saudi Arabian company certificate please guide me how I can get job thanks..