The quality of your videos are insane man please don’t ever stop. Love the videos

It sounds really good man. I’ve been missing your videos, please make more!

Best 3 valve cam install video out there. Thanks !!!

Thank you for this video! Extremely insightful for the instal and extremely well done.Just put them on my ‘05 GT along with a Brenspeed performance tune (and some other stuff). They sound great! I have 2 suggestions to add having done this myself: 1- You will very likely get “some” debris in your valve train in the process of removing your valve covers/manipulating the cams, etc. so I would suggest dropping your oil after you tighten the new cams, and pouring some oil onto each side so any debris drains out, then go ahead and add new oil & filter. 2- when you’re removing the cam phaser bolt, use an air gun if you have it! Getting it off quick makes it less likely to disturb the timing chain.

Why skip to the lope?? It sounds the best hearing it transitioning it from a cold startup to idle....

Dude, I was super close to buying Hot Rod cams for my car, but now you have me thinking about Detroit Rockers! Thanks for another awesome video.

If you made everyday context you'd be in the millions for subs. Good stuff. Keep up the GREAT content!

Nice build. I see your making good progress. Most importantly thank you for being conservative and tasteful with the car. No goofy wings....or well you get the point.

Thanks for the update. You inspire me to build my 2008 gt instead of 5.0 swapping keep up the good work

The quality of these video are amazing. Great job! Can’t wait for the next one

A true man's how to video, straight to the point and got it done in an appropriate amount of time.

This is one of best looking 07 mustangs I ever seen!

Finally you post !! Awesome ride man gotta love our s197

This is the best video on KZfaq on replacing cams!!

Great Video, I actually installed the same Cams in my 2006 Saleen Mustang from the steps of your video. It’s really not hard but took a little time. Definitely a 1 day job and I did it myself. I am not a mechanic but am mechanically inclined. Thanks for making it easier for me to do this install. Your car is sick!

This is super late but this video is the reason I was able to install my camshafts on my 3v! I decided on the BBR Stage 1 cams and I couldnt be happier with the chop and huge difference in performance. Thanks for making this video!

Sounds amazing major respect for not just throwing in hot rod cams but ik u are actually researching how to build a 3V not like these kids i see all the time cant wait to see more vids keep em coming

Sounds incredible man great job on the install and great tutorial video! The quality of your videos are amazing keep up the good work and keep the videos coming. My Mustang is the same color as yours and I went with the frpp cams but had a shop install it after seeing your video it made me feel confident that I could have tackled the install myself. Anyways thanks for taking the time to share your videos hope to see another one soon.

Rarely do I comment, but having just acquired an 05 for a project, your videos have been a huge asset. Outstanding quality and clear content for the adults in the room. Subbed.

Great video,sir! Detroit Rockers do just what Brenspeed says they'll do.Good drivability,great sounding idle,and they make decent power.The NA grind also works good with superchargers,if you're thinking down the road.I'm running them in mine,and i love 'em...

Favorite series for the S197 please keep going with this series and when its finally finished let's do something else with it

FINALLY! Great job man! I did hear you one day down by the Airway Dr. ! Man does it sound amazing! Keep the videos coming and I'll keep watching!

I like how you explain pretty much everything you need to do to install them! That actually helps a lot

As soon as you called out the other tubers, I smashed the like button on and off about 20 times lol. Thank YOU for not abandoning your platform. Was wondering where you were. I know that you’ll tell us in another video what happened prior to this video. Good choice on the brenspeed cams. They are proven and work well with forced induction. And yea, it sounds sooo good. 💪🏾😎

You have amazing quality and care into your videos! By far the cleanest 3V on KZfaq.

Was reaaaaally hoping you went Comp Cams Stage 2 NSR for a second but I have to say those Detroit Rocker Cams sound a lot better than I imagined.

Amazing, amazing, amazing video. Can't say it enough. This helped me tackle my cam install. I took my time, did my research and, mainly because of this video, was able to install them. I had some hiccups, but nothing that wasn't my own clumsiness' doing. Thank you Four Eyes for making my first dose of engine work an awesome learning experience!

About to troubleshoot a ticking noise. Possibly a bad cam roller follower or stuck lifter. I've watched this video multiple times. Thanks for posting and assisting DIYer to tackle these kinds of issues. I have a 2006 Mustang GT the same color as yours. Love it.

Wow. My next summer project. Thanks for breaking this down.

Sold me on the Detroit rockers. Was originally looking at the hotrod cams, this video changed my mind. Moving over to Instagram to follow you rn 👌

I have a 2010gt, i went with the brenspeed detroit rockers. Luv em. Very drivable, choppy idle, and on the dyno the graph shows a climb the whole way, never drops. A bunch of cams are cool id imagine. Ultimate choice depends on what the car is for, in your life.

Great video bro, glad you picked the Detroit Rockers, you got a great series going here

awesome....LOVE THE DETAILS OF THE Install ….. AND THE SOUND

Great video! You must work in the business. Not many rookie youtubers start off with such high quality content and editing. If I'm wrong, take it as an even higher compliment! I came for the Mustang. I subscribed for the quality.

hands down you have the best lookin gt of this generation dog

Please keep making this videos!! They help alot thanks.

When I first got mine I didn't have the Kooks long tube headers with h- pipe once that was installed I noticed a big power difference. Before only on top end range. Yes, they do sound great. Please make more videos. I personally love my Brenspeed cams which I read on Mustang Forums they produce more power than Ford Racing Cams.

Get with Lito on a tune next. The top end will be night and day different. I run these cams and used Brenspeeds tune for a year before letting Lito work his magic. It will be the best 150 bucks you will spend. That cold start idle will be cut in half also and then it will settle in at about 730 rpm shaking back and forth. Good job man!

I’m here a year later looking to cam swap my 3v and I’ve got to say this is the best video out there.

I really appreciate your 3 valve build thanks for making these vids for us 3 valve lovers

Please make more videos more often I love your channel. Such clean editing

Man glad to see another video!

Coming from a certified diesel mechanic you did an excellent job

That fucking sounds amazing ! I've been looking forward to seeing this video from you, nice work as always 👍

Man the sound of that idle makes me want to make terrible financial decisions

Car sounds absolutely aggressive ! Love the sound man

The production quality of your videos is ABSURD. Easy sub, and I don't even own a Mustang.

Hell yeah hes back!! Nice work man

Yesss bro I’ve been waiting for you to come back lol

Idle sounds good

the warm idle sound gave me CHILLS

Hearing the deep grumble gave me goosebumps. Good sh*t bro!

Again a very clean and descriptive video and the ride sounds great..I have a set of Detroit rockers spec'd for my roush m90 supercharger..but I need a shop to do the install.

Who could ever hate that sound

Your video quality is mad good. I don’t own a mustang but I respect people that can give proper instructions . Got my sub

Welcome back old friend...

Definitely getting these.. like after I get my license.. Then my car..then nm. Anyways sounds dope af ✊

the idle sound with the new camshaft is music to my ears 🤤🤍

Bro, that thing sounds brutal...I love it.

Love my Detroit Rocker cams...brenspeed did a great job. Awesome video.

Awesome sounding cams, really helped me on which way to go on those. Keep it up.

I haven't felt compelled to hit the like button faster.

BTW, this is the best sounding mustang I’ve heard on KZfaq (or ever) in my opinion

I could listen to that motor all day long!

I can't wait to see the new dyno numbers with the cams installed. Hopefully you see 350 bhp

Love the sound of the new cams. And nice work on the how to portion.

Hey man! I'm lovin the videos! Being a 2006 mustang GT you're definately giving a great basis to go from!! Keep em comin!

Wow. First view on your channel personally...what a sick sounding/looking car. Damn

That thing sounds nasty man! Once again one of the best car channels on youtube 👍

Great stuff man. Love the way you break everything down and how you explain things. Subbed. Looking forward to future videos

Changing those cams was way easier than I thought it would be next mod for my stang forsure

Your like to dislike ratio shows how much we want your content. If you go to events or get together with other car guys bring out the camera. That could be some good content, you’d blow up!

Good job. I feel confident that I can do this install myself now. I like those cams too, they sound awesome. Looking forward to your next video and some dyno numbers !!

sounds wonderful! keep up the great work man!

Finally! I traded my fbo hot rod cam 3v in on a 18 mustang GT since your last video, but I will always have 3v love.

Need to congratulate you for your detail descriptions on ALL your projects. I’m also a 3V yunkie 😂. Cheers

I really love the sound of the Detroit rockers, but my goal is for more power over sound, but to stay streetable. So I've come up with a combo for my f150 5.4 3v that "I think" will give me what I'm looking for. Custom grind cam, intake 235°@.490 lift, exhaust 230°@.500 lift With 112°lobe separation , port match the intake and exhaust, shorty headers, cat delete w/dual 2.5 exhaust w/xpipe. Hope this works.

Very informative you now have a new sub😊

Dudebro continue to make videos man. You honestly got one of the baddest three valves out there

This is my next mod, nice ride man.

Sounds mean. Always good videos and content. Keep it up.

Awesome video man! Sounds badass!!!! I really want to do the detroit rockers in my 05

Great video. Well produced, detailed and full of info. Thanks!

I cannot believe how much sound different that makes sound nice

*First 10 seconds Intro* already like the vid and subscribe. Keep it up!

That idle sound is sick. Love it. Another great video, I’m getting a stock 05-09 gt soon. These vids are inspirational. Thx again 👍💪🤟

Nice ride. Simple, clean and mean.

Just joined the channel; great video. The details on the install set you apart from basically all other mustang channels, and place in you ChrisFix territory. Looking forward to watching the channel grow!!

Those Detroit cams are eargasmic... hey, quick warning before you jump into the rabbit hole that is suspension upgrades on your S197... don't make the same mistake that I did. If you are going to lower the car any distance at all, realize that the further you lower your suspension, the more stress/wear&tear you will put on certain components. Changing said parts out for adjustable versions of them will greatly reduce said stress. IE. the 05-09 parts that usually should be replaced when you lower the car include adjustable front sway bar end links, adjustable tie rod ends (aka. bumpsteer kit), ball joints, adjustable rear upper AND lower control arms, and adjustable panhard bar (alternatively, throw out the panhard bar for a Watts Link kit, which is expensive). I'd advise for KONI STR.T shocks/struts, and SR Performance's Strut Tower Brace and 1.5" Lowering Spring Kit. Best value you can get, but keep in mind lowering the car will come with needing to upgrade some of the suspension to adjustable parts. Love your channel, love your videos. It's a damn shame you don't have more subs/views, because your quality>quantity approach is hard to come by in the car community these days. Kudos.

What I think about the new sound DAMN

Great choice of the cam. The sound is awesome and does not have that large lop sound that sounds like a drag car. The videos are fun to watch and gives great information on upgrades. Great job.

Man what a sexy sound , either the idle and the throttle sounds like an mustang 1967 coupe.

3v 4.6’s in my opinion are the greatest sounding engines of all time.

With the new cams, you can use the new ford performance intake manifold.

That sound super sick

I had hot rod cams in a 2010 GT from 5k miles to 108k miles with no problem and it sounded great. Videos are still on my profile

By far Ford performance hot rod cams all day best imo

Long live pushrods 😂😂

This is a great video. Very detailed, which is nice for guys like me. A lot of information is skipped in videos like this because a lot of the information is assumed to be common knowledge which might not be for all aspiring mustang enthusiasts. Keep up the great content. thanksP.S. I love the performance upgrades in the 4 stages

Great video, Sounds Awesome, It's a pleasure to have someone (You) actually show what has to be done without all the B/S