@juancarlos-bryancruz9585 Жыл бұрын
Just bought a 96’ this video was very helpful plan on watching your brake video because at the moment I have no breaks
@daveraymond2265 Жыл бұрын
Glad it helped. Thanks for watching!
@EricPoulsen Жыл бұрын
Thank you for this -- was very helpful.
@phillipschwarz66 6 ай бұрын
Thank you for this video it was very helpful
@Shookiiee 2 жыл бұрын
Next time your removing the cv from the knuckle just remove the shock bolt from the upper control arm and then you can loosen the control arm bolts and swing your arm up and slip the CV out
@taylorg223 Жыл бұрын
Great video , going to attempt with a c clamp
@noahjagger3831 2 жыл бұрын
I’m getting ready to do my axles, ball joints and wheel bearing on mine is there a certain size ball joint removal tool?
@daveraymond2265 2 жыл бұрын
I used the standard ball joint press tool with sockets that would work.
@Day12My Жыл бұрын
16:21...You shouldn't have to tap it in. It just pushes in pretty easy
@daveraymond2265 Жыл бұрын
I am tapping it past the expanding retainer clip. You cannot just push it past that clip if the clip is doing its job 👊
@Day12My Жыл бұрын
@@daveraymond2265 I disagree. I do it all the time. I mean if you can pull it out you should be able to push it in.
@daveraymond2265 Жыл бұрын
@@Day12My The clip is there to keep it from coming out easily
@69dwjohnson 4 ай бұрын
@@daveraymond2265 I agree , it needs to be taped in the way you did it.
@CbrF4i600cc Жыл бұрын
Normal C clamp work?
@daveraymond2265 Жыл бұрын
This Tool is super heavy duty much stronger than a C clamp. You can try and you may have success
@jacobwilliams7953 Жыл бұрын
What’s that tool called where your removing lower ball joint front control arm?
Partzilla
Рет қаралды 55 М.
Fabiosa Best Lifehacks
Рет қаралды 21 МЛН
Partzilla
Рет қаралды 67 М.