FOXBODY TERMINATOR X WIRING TIPS (90-93 Car Specifics)

No video

FOXBODY TERMINATOR X WIRING TIPS (90-93 Car Specifics)

Рет қаралды 4,936

Dylan Cogar

Күн бұрын

Oil Filter Sandwich - www.amazon.com...
Pressure Sensors - lowdoller-moto...
Follow me on Instagram -
/ dcogar302

Пікірлер: 13

@michaeltexmjs6420 6 ай бұрын

One of the best examples of wiring for 92-93

@mattstarr5975 7 ай бұрын

Thanks for the help, very nice sir!!

@isaacowens283 Жыл бұрын

Thank you! Gave me a great understanding

@superbrowndudenational_trx Жыл бұрын

Great video!

@bradkiff3780 2 ай бұрын

Great video. Answered most of my questions. Do u have a link for that other video u reccomended? Thanks

@brandonknight7240 6 ай бұрын

Looks like you got this figured out, would u be interested in doing another one for hire

@aurdraco Жыл бұрын

Great vid, thank you! Question: What did you do for a fuse box cover after installing the fuse tap? Just grind plastic down on the stock cover so it cleared? I don't think I've seen anyone address that. TIA.

@DylanCogar302 Жыл бұрын

I have been running with the cover off for a while now. When I get around to cleaning the car up some more, I’ll probably look for a way to splice into something and remove the fuse tap.

@Mike_Mondragon Жыл бұрын

When you remove the Schrader valve you need an adapter to accept the pressure sensor’s 1/8” NPT fitting? Does that come with the Lowdollar Motorsports sensor? Or they sell the adapter separately? Or you sourced the adapter elsewhere? Thank you! This is a very helpful video.

@DylanCogar302 Жыл бұрын

You will need to source the adapter. I happened to have one because I had a pressure gauge there before. LMR, Jegs, or Summit have them.

@aurdraco Жыл бұрын

The Shrader valve is 1/16" NPT. I already had a 1/8" to 1/16" T junction to mount a fuel pressure gauge off of it. No idea why I didn't find a bushing 20 years ago but now I was able to just add the sensor to the other output so I still have the gauge in the engine compartment, in case I need it while fiddling around and don't want to muck about with handheld or a laptop for whatever reason, and the sensor feeding the Term X data. Did something similar with Oil Pressure sending unit in that I created a 3-output junction (super gaudy lol, 1 for stock gauge, 1 for pillar-mounted mechanical gauge, and 1 for Term X).

@ALESTER16 11 ай бұрын

Thank you for this!!!