Thanks Yves ! Hope I did the Fractal some justice 😅 I don’t mind the ducts at all but interesting to hear about a V2 👀 I’ll have to check it out - analog this time !! Lol

Appreciate it man, always an honor! Tried my best to do the fractal some justice

Very nice - i love rcinpower motors. I have rcinpower 0802 25ks on my best flying 75mm whoop. Motors are super smooth and seem very durable, too. Let me know how the 1002s do, if you remember!

MAXXXXED OUT!

Much appreciated!

Thanks Cha Cha! Might be a WHOOP HAUS drone 🤘

LOL - I tried to force my voice to be more ROBUST

​@@MoeFPV😂

Appreciate it, Ryan !

Thanks Greenhorn!

Thanks Mc! How do the 1002s feel?? I might buy a set soon but I am trying to budget a bit 😅

@@MoeFPV Lols, I hear ya. I‘m using RcInPower 1002 22‘000kv motors soldered and they feel really good on the HDZ build. But to be honest I never tried 1102‘s so I could not say how different they feel. 1002 seemed to fit my Pro builds and now the Pro Max so I did not change them.

Hell yeah man! cant beat HDZ and walksnail on the micros. I have walksnail on my 3" ultralight toothpicks and HDZ on my whoops! Thanks again!

Interesting - i havent heard of those props before but ill have to check them out. Thanks for the info !

I thought about getting into more detail but, outside of the component list, really it was just the soldering of the 4 wires of the Whoop Lite board. I thought insight as to the components would be all that anyone would want to know, to be honest

Im curious, not really how you solder them, but more how you delt with mounting them. I want to build a walksnail F75 and havent really decided if the snail board should go on top of the FC, under it, or on the opposite side of the PCB. and did you need to use your own hardware, or was the hardware in the Fractal kit adequate. BUT, that said, I am a sucker for some good solder porn.

@@Mupshot ahh gotcha - I can say that we’ll have to put the HD boards on the bottom of the frame if we’re dealing with the typical 1s 4 in 1s with motor plugs. The plugs will either run into the carbon fiber frame or will have to be elevated with spacers for clearance, but it would way too high. You might be able to mount an fc with solder pads for the motors if the USB port is in a good place, but it would still have to be elevated higher than we would like to make sure it doesn’t stick out of the bottom of the frame. I actually did use my own hardware although I bought the hardware kit from fractal as the screws are usually the hardest things to get a hold of in my opinion, but you can use any grommets you have. Feel free to message me a Discord if you’re going to build one and I can help out ! Walksnail might be a good choice , but I always seem to get vibration in my cam when I put them on WHOOPS

I completely understand as far as your camera issue goes. I will say this frame sandwiches the cam between the ducts so i have not had to adjust it ONCE like i usually do for my F75 analog. Just something to keep in mind but it will still fly great with a standard canopy. I think Callisto has created a TPU mount that pushes the camera far out front specifically for the fractals - check his thingiverse out!

I cant remember if i said it in the video or not but my best flying 75 analog whoop is on the rcinpower 0802 25k. They are super durable for me and so smooth. Let me know how that build turns out - i am very interested to hear because i am definitely going to build another one of these with pretty much your same specs

Thank you very much! And thanks for the insight on the 0802s. Did you happen to try it with tri blades? And was it an HD build or analog? I really wanted 0802s to work with an analog build! I will have to make that one next - maybe with Yves v2 frame when it comes out! Thanks again for the info

@@MoeFPV Only used bi blades on the 0802's and was a hdzero build. I reckon 0802's on a analog lightweight build would be good!

True ! Dont get me wrong, I like to have at least ONE HD whoop but I still have soft spot for analog

Amino! Thanks man - and yeah my desk it getting out of control LOL let me know what you end up building? i need to take a little break before i go BANKRUPT

@@MoeFPV Yeah I need to save up a little for some gear. 8BitFPV has an awesome Fractal Pusher. Looking at a 2s one of those in HD0, a mini-cinie heh

PS: Just cleaned my bench lol@@MoeFPV

Thanks for the kind words, man ! And yes, you need at least one whoop in your fleet! They are a lot of fun, and like the toothpicks, you can fly them anywhere!

Yes this one is relatively new! I think another version will be coming in the future with maybe a more pushed forward camera mount. I fly all of my setups on Betaflight but I know a lot of people prefer QS, especially on the fractals! Im sure it will also work well!

You can absolutely use a square AIO such as the x12 - I just built with a cross as i didnt need the internal VTX otherwise i would have definitely used an x12

OK great cause on the beta FPV version of the frame you have to use a cross aio that’s why I was wondering

oh i didnt know that - thanks for pointing it out @@Loganmofficial

Swan! Thank you dude, appreciate ya ! Trying to step my B ROLL GAME up lol

Thank you very much! X12 is just really convenient, being a 5 in 1 and a nice strong 400mw VTX. If we were to build this out on analog and smaller motors it should be lighter than the meteor 75 pro since the 75P uses the same heavy 1102s. Thanks for dropping by!

You can use a fullsize AIO for sure! X12 would work well in an inverted orientation. Thank you for the kinds words : )

In the most recent HDZ update, the picture in the goggles in 1080p - I am least 90% sure. BUT its not very noticeable over the 720p mode. And i know the feeling man - everything is so expensive! Just save for a bit and get another FC - the mob 7 is a great whoop as is but i know the feeling of wanting a nice toothpick, too !

i watched the hd zero website and the max resolution is 960p for their cameras, but the vrx can output 1080p so i think a new 1080p camera will come soon :D @@MoeFPV

HMM not sure about this - i though the current cams, nano V2 and the nano lite, could produce 1080p footage. I know the Nano 90 camera is limited to 960 though. maybe that is what you are referring to?

could be that their shop isnt that current atm@@MoeFPV