Frame a Basic Shed Wall
Рет қаралды 7,016
Күн бұрынTime to frame a basic shed wall. One side of the shed is a basic wall with no windows or doors. This is the easiest type wall to build. I am using a treated 2x4 for the bottom and untreated lumber for the studs and top. First a but the bottom and top to equal lengths. Then I set them side by side so they are together. Using a speed square and tape measure I mark every 16" on center across the two boards. I then cut down the studs to the length that I need. In my case I wanted the walls to be 8 foot tall. So my studs needed to be cut down to accommodate the bottom and top boards plus a top plate. Lastly once the wall has been assembled I use liquid nails and a combination of screws and nails to hold the wall in place.
Chapters:
0:00 Intro
1:38 Start Building
7:07 Stand the Wall up
8:30 Fast Framing the second wall
Looking For the Next Part?
Part 1 Install base footers with paver stones:
• Installing a Shed Bloc...
Part 2 Build the Shed Base Foundation:
• Build a Shed Platform ...
Part 3 Build the shed Trusses on the platform:
• Shed Roof Rafters - Bu...
Part 4 Frame a Basic Wall:
• Frame a Basic Shed Wall
Part 5 Frame a Window Wall:
• Frame a Window Wall
Part 6 Frame the Front Door Wall:
• Framing a Shed Door
Part 7 Trusses with Top Plate Install:
• Install Shed Top Plate...
Part 8 OSB Siding Install:
• Shed Siding Installation
Part 9 OSB Shed Roof Sheathing:
• Sheathing a Shed Roof ...
Part 10 Front Door Awning Build:
• Front Door Awning - Sh...
Part 11 Metal Roof Install:
• Metal Roof Installatio...
Part 12 Simple Window Install:
• Easy Shed Window Install
Part 13 Exterior Shed Siding Install:
• Install Shed Siding - ...
Part 14 Build custom Shed Doors:
• Build Custom Shed Doors
Part 15 Shed Ramp and Landing Build:
• Building a Shed Ramp a...
Part 16 Installing the Trim Fascia and Soffit:
• Installing Shed Trim
Part 17 Finished Shed Walkthrough and Overview:
• The Finished Shed Walk...
Ram Pumps available on Land To House Website:
www.landtohouse.com/rampumpsales
Help Support land To House by Paypal:
paypal.me/landtohouse
Send Mail to Land To House:
Land To House llc
P.O. Box 323
Micaville, NC 28755
See whats coming up before it hits KZfaq on my Facebook Page:
/ landtohouse
Land To House is a participant in the Amazon Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
Land To house is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a way for websites to earn advertising revenues by advertising and linking to Amazon.com
@patrickhoffmann8893 2 жыл бұрын
Great outro! And only now I realise that you implemented chapters. That is nice!
@jllaine 3 жыл бұрын
I really enjoy following your builds, as of now I have watched EVERY video on the land to house channel. It's perfectly fine to use all deck screws to frame a shed wall. Nails are just cheaper and go much faster if you have a framing nailer.
@LandtoHouse 3 жыл бұрын
Wow that is a lot of videos! 1200 ish. In my past builds the nail vs screw crowd came out. So to be fun I used both. :)
@noneya3504 3 жыл бұрын
Nice work. My only caution is small children (especially bare footed) and power tools don't mix
@LandtoHouse 3 жыл бұрын
Yes. They are learning about tools.
@boominS10 3 жыл бұрын
Looking good so far. Ill be doing a 20 or 25 x30 in the future but I'm going with 12ft walls.
@LandtoHouse 3 жыл бұрын
If you have the space for 25 x30 do that! I already should have done 16x20 haha My other building is 10 foot walls. 12 will give you so much space!
@eduardobecerra2587 3 жыл бұрын
Nice job I’m barely starting some projects too
@LandtoHouse 3 жыл бұрын
Thank you. This build has worked very well!
@markbrandenstein7861 2 жыл бұрын
Why are the first 2x4’s from each end not 16” on center?
@jillhickman4762 Жыл бұрын
Did you keep a running total of what the entire building cost to build? I sure would like to know and when did you build this?
@LandtoHouse Жыл бұрын
This build was done in Oct 2021. Some of the cost was high from C19 its better now. I don't have a cost breakdown.
@noneya3504 3 жыл бұрын
Just mark your base and top plates once. Will save you a lot of time
@LandtoHouse 3 жыл бұрын
Thats true. But it also works to mark twice. :)
@Celcius1 3 жыл бұрын
That daughter of yours is such a cutie, definitely takes after her father, and is daddy's little girl! Do you think she will become the pro to outclass her dad?
@LandtoHouse 3 жыл бұрын
She is very smart and seems willing to learn the things I build. I hope she is the next April Wilkerson.
@LandtoHouse 3 жыл бұрын
At least I am not wearing my Noah's Ark building sandals.
@MJ-wx7em 2 жыл бұрын
Hello, What are the exact screws did you use? I tried looking and pausing in the video was hard to read the label. If you can post a link or described them briefly. Excellent work and very informative instructions! Keep at it! Thanks!
@LandtoHouse 2 жыл бұрын
These are typical torx screws. My local hardware store has them for $4 a pound. Lowes has them for $10 a pound.
@MJ-wx7em 2 жыл бұрын
@@LandtoHouse So the screws I got here at Home Depot in NJ, are DECKMATE #10 x 3-1/2 in. Star Flat-Head Wood Deck Screws 5 lbs./Pack. Is this applicable to the project? Also are the screws in your video "Deckscrews"? Thanks for replying and helping me out.
@LandtoHouse 2 жыл бұрын
@@MJ-wx7em yes deck screws. They have an exterior coating to last many years outside.
@MJ-wx7em 2 жыл бұрын
@@LandtoHouse God Bless you and your family man! You helped me and so many others who watch your videos, feel confident enough, with the correct knowledge and demonstration to even attempt this. Subscribed and liked!!!!! 👍 Cheers! MJ
@viliuspocius438 3 жыл бұрын
Like that PRO tip:im not a pro
@LandtoHouse 3 жыл бұрын
Haha yes so true.
@Celcius1 3 жыл бұрын
Just as a design choice for future projects if you want to reduce the amount of timber you use, you could utilise the Australian method of frame construction, when doing wall frames, we maintain centres at 600mm with noggins/cross braces at approx 1200mm height uses less timber and is just as strong, timber in Australia is a bit more expensive so you learn to make a strong structure with less. here is a pic to give more of a picture what i am explaining www.peakebuild.com.au/wp-content/uploads/2015/04/timber-frame-construction-pic_013-1024x768.jpg
@LandtoHouse 3 жыл бұрын
We call it 24" center here. Works well. Lumber was very costly this year. But I wanted to be able to hang storage shelves at 16" center.
@politicalpartyagnostic268 3 жыл бұрын
OffGrid Aussie Prepper™ spot on Trump ushered it in here in the U.S. He is pure con artist
Kings Fine Woodworking
Рет қаралды 692 М.