really dammm should have kept it that way

Bro, how many KM u drove ur truck after using this trick.

You wrong men , The sistem is working , dpf and doc working good . Regular emission

also a federal crime

red66chevy fuck federal government

@@red66chevy So is running two log books but it never stopped me.

​@red66chevy federal government has more worse crimes than this trick for trucks😂😂😂😂😂

I have the same problem, after you done all this , is truck working fine?

Did you got any answer to your question? I do have the same question 🤔

Cool 👍

Bypass is you leave the old sensor installed on the hole is normally and disconnect the plug from the old sensor and get a new sensor and just connect the plug to the new one and hide the sensor and secure it that way don't go all over the place

That nox sensor on Detroit doesn't have a working temperature rates. It is the computer what determines when it needs to be activated so that is right you can easily manipulate the reading that way.

Were you able to clear DEF quality FMI 17? It goes fmi 2, fmi 17, then finally fmi 1. If we can clear fmi 17 that would be hella helpful.

@@mattabraham3549 I was able to clear all codes but the fmi level 1. Then I bypassed the speed sensor and was able to bobtail to my favorite Freightliner. By the time I drove the 600 miles the codes self cleared and I was able to reconnect the sensors. I kept telling the dealership that I believed that the issue was my engine or something before the 1-box sending in too much pollution and that is why I failed 70% efficiency on hill climbs or heavy loads or higher speeds. Freightliner said that I was crazy and that they were the experts. They said it was a bad 1-box . $10,000 later(new box) I only got 85% efficiency in their lot. "Your all good" Freightliner says. 50 miles after I left Freightliner my engine blew up. I have coolant leaking from a cracked cylinder sleeve into my oil. Engine needs rebuilding. There was nothing wrong with my 1-box. It was just doing it's job and reporting that there was high emissions due to excessive blow by. The dealership never pressurized my coolant system to check for leaks or loss of pressure.

@@lukasallen846 All stealerships do is hassle new parts for daimler's profit.

No need to buy a new sensor, just take out the existing outlet sensor and screw a plug in the hole. Then zip tie it out of the way.

@@dallonebmeyer8229 are you sure . is that work if derate engine, 5mph , regen not working , soot level high. stop engin light , check engine and regen light on /....

@@virknation7535 No, If you have all those codes it will not work. This only works for poor DEF quality, or NOX conversion efficiency low.

The SCR by pass it is only for emissions monitors this has nothing to do with regen. If you do the by pass the regen process will be the same. Driving, parked or forced.

What did you end up doing?

Va a depender de la presion de el filtro

@@franciscoamayaYT muy bien muchas gracias Francisco . tengo más preguntas como puedo comunicarme contigo ?

Like 400

You don't have to do that if you want, it is optional.

Yes, a 22 or 7/8 oxygen sensor socket (open socket). You can buy it at auto zone or Amazon.

But why remove the sensor ?

Bro have you removed sensor??

No, si elimina los filtros no nesecita hacer El bypass

Did you do a regen 1st?

+97935 c242 The software name is DDDL software and the adapter is a NEXIQ USB link. You can buy them online or at your local heavy duty tools supplier. My only recommendation will be to to buy a 2013 or older DDDL because this one doesn't require a year subscription.

Francisco Amaya Hello, do you know the right adopter for dd15 or a link for it Thx a lot for help

Diesel laptops, is a good place to buy the programs

Yes

@@RockCreekEnterprisesNM he knows that check out his channel

@@fredc8618 If he knows it, then why did he ask the question???

The nox plug clip?

No you can't.system needs to be fed some oxygen values.Without a new/used sensor u can't.

Side effects are Amber light on (only on some trucks) Sometimes low power (only some trucks) No all the truck are going to present the side effects but it does not affect much.

About to try this tomorrow i have the low nox code. Sometimes my engine derates in power and will reset if i park for 10 mins. is it possible if i try this my engine will stay derated in HP. Cuz the 25% derates i get suck

Eso es un efecto normal.

juan guerra entonces desconectar el sensor y volver a conectar con el nuevo ?? en español le entendería porque en inglés cuesta mucho entenderle a Francisco

Y se quita solo o queda por siempre o que hay que hacer por que queda la luz amber

Sorry.. To translate in English.. Was the question.. After a few days engine code for scr nox outlet 3057 fmi 2? Response: This is may happen meaning the truck is still okay to drive? Bypass working fine? Also how long is bypass good for working? Can DPF system still need replacing?

Last question.. Does this code 3057 02 only appear when you don’t replace the nox outlet sensor?

No, it is not permanent It is just to make the SCR box last 900K+ miles After this you don't have to do more modifications. But you will need to repair any else that can go bad, like: DEF pump DEF lines Sensors wiring Etc,..

Francisco Amaya how do you know when SCR box is bad? I know you said this bypass is to make it last 900k+ what will running a dd15 with a high doc pressure of +1.5 do in the long run to the truck?

Otr performance reset and regen tool

Problem is not the sensor but scr box.If you wish ,you can spend 10k to replace the box.

3226, need fmi number after spn to help you. but 3226 is either outlet nox sensor circuit fault or drifted. check for spread terminals on harness, verify 12v across pins 1 and 4 and 60 ohms across 2 and 3.

Outlet nox sensor. I tried deleting codes with computer, do regeneration etc. Codes stayed and truck stayed in limp mode. May be it would have worked if I did it before truck went in to limp mode, but no such luck for me. Ended up paying $3500 to tow it home and then 11k to replace one box 😢

From 100k to 500k miles, it varies

@@franciscoamayaYT After I bypass,will all my check engine lights go out,And will it come out derate mode,Thy???

No derate but the amber light will stay on

@@franciscoamayaYT 500k sounds almost like a permanent solution. I thought it was a temporary. So I can Just drive with bypass without fixing scr box?

Haga una regeneration para quitar el modo de proteccion

Yes, you can. It will last until the one box gets completely destroyed (up to 1 million miles)

+shyeem63 Yes, this are the steps to follow to replace the outlet NOx sensor.

Yes, Everything works normal