No video
Setting up dual and 4 wheel steering on RadioLink RC4GS V2
Рет қаралды 8,501
3 жыл бұрынSetting up dual and 4 wheel steering on RadioLink RC4GS V2
Want to send something to The Tank RC to review and see it on the channel? Contact us via the link on the 'about' page
If you would like to help out with my special builds click links below.
paypal.me/TheTankRC?locale.x=...
My Facebook
/ thetankrc
My Twitter
/ thetankrc
My KZfaq
Subscribe here goo.gl/1W4CZ7
My Instagram
/ thetankrc
Hope to see you on the trails soon.
Thanks for watching.
Like, Comment, Share and Subscribe.
Keep the batteries full and the throttle to the max.
RC Evolution where will it take us next?
#thetankrc #RadioLink #4ws @Radiolink_official
@ChompChomp907 21 күн бұрын
Thanks I wasn’t expecting to find a video and this is gonna help me out so much
@AdventureTimeRC 3 ай бұрын
Good video tank i needed a refresher lol
@TheTankRC 2 ай бұрын
Lol, anytime, you know I'm there for you LOL
@jkmayhem 2 жыл бұрын
A little tip on the transmitter. Put a little lego wheel on the channel 3 knob. And you can use your thumb to steer the rear wheels. And your other hand on the wheel. It makes driving fantastic.
@TheTankRC 2 жыл бұрын
Good idea I might have to try that
@OGRadGrow Жыл бұрын
This is the best channel mixing explanation on the web. Great work. 👍🏾 💯
@RcNickster709 3 жыл бұрын
Got to say. Owning one of these controllers. appreciate you doing these videos Tank. Well done man.. :)
@BlackSmithRC 3 жыл бұрын
Another awesome instructional RC video! Love the creativity Tank!
@islandrc-duke1972 3 жыл бұрын
great information and video
@YOOPDLRC 3 жыл бұрын
Very nice 👍😊👍
@dantesmith3664 3 жыл бұрын
I thought about doing this on my TF2 but more like supercars where it isn't noticeable. and that way id get a little function to fight hills and yet still look like a scale Toyota. just a fun thought. we'll see. Good video RC friend!
@BlackUnitAdventureSport Жыл бұрын
Thank you sir.. For sharing this useful information... Very clear and accurate informations... Like and Subscribed....
@TheTankRC Жыл бұрын
I am glad it was helpful to you. Thanks for watching and supporting
@mypassionrc-studioxd40lous66 2 жыл бұрын
Thanks needed this information 🙏🤘😎
@TheTankRC 2 жыл бұрын
Thanks for stopping by to watch and I am glad it was helpful.
@MRarezzo89 3 жыл бұрын
Nice video
@ahmadfaris8044 9 ай бұрын
Gta6 is looking sick
@stephanevaucelles6378 4 ай бұрын
hello, thank you for this tutorial, just a question to change the direction mode, we can create a model for the different modes either crab or reverse
@davidhazelden2054 3 жыл бұрын
Could u do it the opposite way so u have the normal steerin on big wheel n the 4 wheel steerin on the little wheel m8
@simontromans2748 2 жыл бұрын
Nice one👍 in mix the MST is CH3 (CH3 set to the VR dial) and the SLV is ST (steering)
@HeadBassVTEC 4 ай бұрын
thanks, the manual is not great and the menu system on RC6GS is crap compared to my old Spektrum DX3R I needed to setup a dual servo for my E-Revo and this helped me a lot
@TheTankRC 4 ай бұрын
Glad I could help. Thanks for taking the time to leave a great comment.
@comi9 10 ай бұрын
Precious info here! Quick question, though: is it possible to achieve the dual steering using a single servo?
@TheTankRC 10 ай бұрын
Thank you for the great comment, yes some companies actually do sun a single Servo for dual steering like Tamiya Clodbuster and the HPI Wheely King
@comi9 10 ай бұрын
@TheTankRC great! Thanks for these references, I'll check on them.
@mr-kris 5 ай бұрын
I have the 6 channel version of your controller paired with a R4FGMv2.2 receiver with built in gyro. Is it possible have the gyro control two steering servos? My plan is to induce body roll to simulate weight shifting side to side in my drift truck.
@TheTankRC 5 ай бұрын
built in gyro only works on channel 1, and yes you can use a Y splitter to control 2 servos
@HeadBassVTEC 4 ай бұрын
@@TheTankRC if you set your PMIX to Master ST and Slave CHx the gyro should still work with dual servo cars? or not?
@Ryndel Жыл бұрын
Can you run two esc this way too?
@jimspencer9628 2 жыл бұрын
Hey mate can you independently do the rear with the silver knob setup
@TheTankRC 2 жыл бұрын
Yes you can
@matthewdorricott4514 2 жыл бұрын
Is there anyway of switching between crab and normal 4ws on this handset.
@TheTankRC 2 жыл бұрын
With this remote you have to use the menu to switch between the modes, it does not have a button that enables you to cycle quickly through the modes.
@matthewdorricott4514 2 жыл бұрын
Thanks for the swift reply dude. Awesome video by the way. No messing and all usefully info.
@AshsRCGarage 2 жыл бұрын
What about a winch?
@TheTankRC 2 жыл бұрын
You could add a Yeah Racing YA-0528 winch controller and use the momentary switch to control the winch
@AshsRCGarage 2 жыл бұрын
@@TheTankRC what is the momentary switch? I have a Reefs 299LP with built in controller.
@TheTankRC 2 жыл бұрын
@@AshsRCGarage most winch controller needs or require a 3-way switch so you have high Center and low setting. The Yeah Racing controller has a jumper to eliminate the requirements of a 3 way switch and uses a momentary switch that most transmitter has.
@TheTankRC 2 жыл бұрын
@@AshsRCGarage www.yeahracing.com/multi-function-controller-system-for-crawler-winch-ya-0528-00074366
Roadside RC
Рет қаралды 10 М.
Crawler Canyon
Рет қаралды 1,2 М.