RadioLink Using ID SEED to control 2 different car independently

Рет қаралды 6,770

Күн бұрын

RadioLink Using ID SEED to control 2 different car independently
Want to send something to The Tank RC to review and see it on the channel? Contact us via the link on the 'about' page
If you would like to help out with my special builds click links below.
paypal.me/TheTankRC?locale.x=...
My Facebook
/ thetankrc
My Twitter
/ thetankrc
My KZfaq
Subscribe here goo.gl/1W4CZ7
My Instagram
/ thetankrc
Hope to see you on the trails soon.
Thanks for watching.
Like, Comment, Share and Subscribe.
Keep the batteries full and the throttle to the max.
RC Evolution where will it take us next?
#thetankrc #RadioLink # IDSEED

Пікірлер: 51

@todd5060 8 ай бұрын

This may be an older video but you just answered every question I had that brought me here. Thanks

@TheTankRC 10 күн бұрын

I am glad this video could help you. Thank you for stopping by to leave a comment and to watch

@joseywilds3133 5 ай бұрын

Wow thanks man, the blinking and rebinding afterwards is where I was stuck thanks so much you have no idea how much this helped!!!!

@TheTankRC 5 ай бұрын

Thanks for watching, I am glad it could help you

@cloves.machado 2 ай бұрын

Excellent video, congratulations, the video is well explained.

@TheTankRC Ай бұрын

Thanks for the kind words, and thanks for leaving your comment

@johnskii 10 күн бұрын

This was very helpful, very well explained. Thank you!

@TheTankRC 10 күн бұрын

I am glad it could help you. Thank you for leaving a great comment

@TuxStang 3 жыл бұрын

Thanks, you explain better than the manual, haven't really understood the aim of the ID Seed until now ... now it opens lots of possibilities ...

@sneakernshirt660 19 күн бұрын

you have answered my question on how to bind with multiple cars. thank you very much

@AC-bl1rl 2 ай бұрын

Perfect, thank you!

@mdd0204 2 ай бұрын

Amazing Vid , learned something new and so important and frustrating 2 years after owning this remote

@Foochila 10 ай бұрын

That’s the video I needed 😮

@TheTankRC 10 ай бұрын

I am glad that is useful to you thank you for watching and commenting

@Webb4RC 4 ай бұрын

AWESOME video man great job going through thise steps perfectly!! Cant wait to get my other RadioLink RC6GS v3 reciever.

@Radiolink_official 3 жыл бұрын

Thanks for ID SEED instructional video!!!

@TheTankRC 3 жыл бұрын

Tell me a problem, thanks for watching.

@tbnice9999 Жыл бұрын

You are a life saver!

@TheTankRC Жыл бұрын

I am happy this help

@tbnice9999 Жыл бұрын

@@TheTankRC I was struggling trying to separate the two

@aaronhouser3711 Жыл бұрын

Well Done

@BlackSmithRC 3 жыл бұрын

Great ID SEED instructional video brother!

@sofeygoree4263 Жыл бұрын

Man this really helped me out......THANKS👍🏽👍🏽

@larrydrouin2497 5 ай бұрын

thank you soooooooo much ,

@rcbustanut2057 2 жыл бұрын

Thanks for taking the time to make this video! I have had this controller for ~2yrs & didn't know this lol. I have 4 cars that I control with it. But I never have more than 1 car with me, I never noticed this before. Now I need to see if this controller has the ability to control the steering such that when I begin to turn the wheels, it starts very slowly but as progress to turn the wheels, it starts to turn quicker.

@allenpowell1702 2 ай бұрын

I need to rebind all my models now :)

@marssien 2 жыл бұрын

Exactly what I was looking for, thanks for the video. I was hopping to do that on my 3 RC since a recently get rid of crystal remote and convert to 2.4ghz remote, bought the RC4GS v2 with 3 receivers. Now I do not need to rebind and re adjust all setting all the time. Now got some set up to do. Thanks again.

@AddyRCBuddy 2 жыл бұрын

Great explained, it helped me a lot. Thanks for sharing! 😸✌️

@davidhazelden2054 3 жыл бұрын

Grate n us full hint thanks m8👍👍

@pbednar 3 жыл бұрын

great explanation, thans alot

@RcNickster709 3 жыл бұрын

A HA.... That's how that works. I got 4 rigs and counting on mine. I was wondering how this works and this explained it well. Thank you Francois. For sharing. Thumbs up from me.. :)

@RcNickster709 3 жыл бұрын

Thanks again Francois. Forgot again.. 6 Rigs and counting

@TheTankRC 3 жыл бұрын

Lol 😂 Looks like your memory is just as good as mine

@RcNickster709 3 жыл бұрын

@@TheTankRC Yup pretty much.. LMAO

@thatoneguy2756 Жыл бұрын

@@TheTankRC if I have already setup 4 cars on the radio, without using the ID seed feature. Can I go back and turn ID seed on, rebind those 4 cars without losing any of the settings? Can I name the model in the ID seed so it matches name in Model list? Subscribed!

@TheTankRC Жыл бұрын

Yes you can assign a profile an ID seed at any time, no ID seed are only numbers and cannot be changed

@raymondbennett2807 2 жыл бұрын

Cheers mate very helpful vid saved me a lot of grey hair from the mannal.

@ModModRc 4 ай бұрын

Maybe i missed something, whats the point in adding ID1 to model 1 & id2 to model 2? It looks just the same as binding 1 reciver to 1 channel These vids are helping me understand my controller i have the 6ch & Maybe able to do 4ws & switch to 2ws & crab without disabling as you did in other video

@Webb4RC 4 ай бұрын

So cool! I have 2 crawlers one is a RedCat Everest 10 and the other one i built, its a 313mm crawler i habemt given her a name yet 😊. Im using the RadioLink RC6GS v3 for one crawler and the other crawler im using the redcat RCR-2CE transmitter and reciever. I have the reverse steering kit installed on my RedCat. I ordered the RadioLink RC6GS v3 transmitter qith dual antenna. In order to just use my Radiolink transmitter i just follow your steps?

@silverarrow7849 2 жыл бұрын

Thanks for the video ! Very useful ! Quick question : did you try binding the same receiver to 2 Radiolink radios using the same Seed ID. Will that work ? I am thinking to buy a 2nd radiolink radio for my son and equip all my cars with Radiolink receivers. If it is possible to bind 2 radios to the same car, it will be useful as each one of us will have his radio with his settings and can choose any car to drive. Thanks !

@TheTankRC 2 жыл бұрын

I am not sure but I will try it, I do have two radios here. Once I do I will post the video, thanks for the question.

@davidhazelden2054 3 жыл бұрын

Dos this only work on the radio link v2 not the v1 m8

@colincharles8737 Жыл бұрын

Can you assign a switch, so a quick flick from one car to the other?

@TheTankRC Жыл бұрын

no you cannot, you have to go into the menu select model and scroll to the model of your want.

@yinghaotan5884 5 ай бұрын

Does flysky has similar Seed ID function?

@CommanderAstigRC Жыл бұрын

Well.. easiest way would be just Turn On one car at a time. I don't understand why you would wanna leave one car ON while driving another car. I guess maybe for different situations?

@getonitnow 9 ай бұрын

Because some might have a boat that's upside down, this way you could send out another boat to rescue it, without the motor going flat out on the upside down boat and such. Also if sailing more than one, you can leave one in the water still powered up while running another boat round

@yinghaotan5884 5 ай бұрын

That's right, ID seed function is really good for more than boat. Any idea does flysky GT3C has ID seed function?