Thank you! You saved me from getting a lecture for 45 minutes from my step dad on how I don't know how to do anything that I've never done before

Thank you for not talking too much and just getting to the point. Very helpful!!

I’ve gotten so much crap for counter turning my screws to prevent cross threading, glad to see someone else does it

Thank you so much for this awesome video! My 17 year old son and I where able to install the new cord so easy with your instructions. I’m a single mom and couldn’t really afford to hire someone. You’re our angel! Thank you so much 🙏🙏💜

Thank you on behalf of all people who bought a dryer this Labor Day weekend!

Thank you so much! My dryer has been in the garage for over a month waiting for my boyfriend to change the power plug from a 3 to a 4 prong Power cable, You explained to me everything I needed to do it myself

Perfect. No b.s.. No stupid jokes. Just getting to the point, and teaching.

This guy does a phenomenal job of detailing which wire is L1 and L2. Thanks for the detail!

I love the tone of your voice it's like you are tired of explaining this stuff to us😂 thanks for making the video easy peasy

Thank you so much! I'm a single mother & I recently moved. I did it by myself with your help. I thank God for you. A lot of men don't know how to be men these days & it's hard to find good help

Now this video I actually understand. It just shows you what to do for either scenario. The other videos gave me three credit hours toward a science degree but didn't tell me where to attach the freaking wires. I'm just trying to install this dryer so my girl will quit asking me about it. 😅

Excellent direct presentation with no unecessary comedy, music or dancing cats, thank you!

My first dryer cord install..I think I can do it now without panicking. Thank you!

Due to many wondering if the small wire connection instructions are correct: The small white or the green with the yellow stripe is the connection/jumper between the center neutral lug and the frame on 3 wire cords only. With a four wire cable you must not use that connection so the wire is put under the neutral screw to hold it out of the way. It is just connected to itself inside the unit. All other green wires connect to the metal cabinet frame.

Awesome video. I watched 4 or 5 before yours and still was confused. Straight to the point!

I appreciate you for doing a wonderful presentation of a simple fix for us less electrical inclined folks!

Thanks for helping people play safe. Just sent this to a guy that needed the help. Was better for him to see it rather than trying to explain it in a text message.

Thank you so much for this, other videos just briefly skim through the wire installation without showing how the wires are installed but this is very detailed and not complicated.

Awesome. To the point, no complicated, convoluted instructions. Great vid.

Thank u for the video! Home Depot dropped off my dryer in the box and dipped out. I guess they didn’t want to install it so this video was super helpful!

I’m am so glad this clear and detailed video was available. I’m more glad that I waited before assuming and moving forward with confirmation. Thanks!

Hey man, thank you. I’m deathly afraid of electricity and don’t fuck with it at all. This made this so much easier and I felt safer. I know it’s not manly to be afraid of these things but I’ve been electrocuted as a child by a plug and I’ve been afraid ever since but my wife needed me to change the dryer cord. I appreciate your help.

This is the content we have all been looking for. Straight and to the point. Thumbs up!

Thank you! I just bought an old house that was remodel and it came with a 3 prong outlet. You saved me so much time

Thank you for this video! Help me out big time with the 4 cable!! I asked the electric guy at home depot and he told me the red wire to leave unhooked! What an idiot! Going to get himself sues giving out bad info to ppl like that! Lucky for me I’m not that dumb lol

No bullshit! This instructor is focused. Thanks for your direction.

Thank you, I did the same way and my dryer. It's working fine, thank you.

Extremly nice detailed video. on the 3 wired connection you did not show how the prong laid out, in other words are they face down or up? . YOU ARE THE BEST

Thank you so much!! You saved me a lot of trouble and headaches. Really appreciate your help!

Thank you so much for this! I just bought a dryer today and changed it thanks to you!

I like the way you screw!

Short and to the point. Very helpful! Even someone with no electrical experience can figure this one out. (not me but just saying).

Thank you for the simplicity and the tips.

You didn't tell me to breathe while installing the wire! I passed out and am in the hospital due to my head injury!

Thanks man. I was able to fix my dryer. Your video was on point!!!

Thank you for this video! I've never installed one of these before and you made it so simple 🤘👍🇺🇲

Thank you for your help I was confused on how to change my cords

Thanks for this video I just installed the four wires myself because of you 😊

Thank you so much for a straightforward tutorial. It works.

I've watched couple of these videos and this is the best and most detailed.

I’m a recent widow, thank you for this video!

Thank you for this clear and concise helpful explanation!

Thanks for a right to the point video. I love when people just get to what I'm trying to fix.

Yeah! Fast and to the point. Easy to follow. Thank you.

Thanks for the lesson swap over went great you are a excellent teacher

Thanks for keeping it short. So easy and fast to understand you. Again thanks love the vid.

Great, simple, easy to follow instructions.. Thank you

Thanks..didn't know that neutral and ground were pig tailed. Also I have stuffed dishrags ,etc below the wires as a net in case I dropped a screw..great video!

Now this is how to give directions!

Helped me with my dryer! Super helpful,keep up the great content

Worked like a charm

Very straight forward!

Great video!!

Thank you so much best description I have seen!

Like everybody else, thanks my man.

Thanks! This was exactly what I was looking for. Saved time and money.

Thank you so much for posting this video!!!!

Thank you so much for this great and easy tutorial!

Great job on the video straight-to-the-point well done sir.

Thanks for this video. So helpful!!

Thank you, this video was a big help.

Needed a refresher ty

This video was excellent thank you

Thank You very much. I appreciate you and your great instructions, Merry Christmas and a Happy New Year. 🎄🎅 🎁 🙏🏽👍🏽👌🏽🙂

Thank you man ,I didn't know what to do with the white wire inside ( reinstall it with the other new incoming white & proceed as normal... I'll let you know how it went danners on & on it...

Great explanation, well done!

Thank you for sharing your knowledge

Thank you for helping me out

Thanks a lot brother you really just saved me a lot of time and money💪🏾

Excellent instruction video 📹 👏 👌 👍

Man…! Your a life saver..! Mucho appreciator😎 Thanks so much, be well good Sir😇

I like the way you presented this, thanks! 👍👍. Subscribed.

Thank you. You helped me out a lot

Thank you Sir! Great video!

You are the best thankyou

Exceptional How To...🏆🥳

Thank you, the way you show very easy to learn.

Thanks for the video now i could wire my washer thank u

Life savior video

Thank you so much for the video! I understand that the center cord on the three prong is neutral and will always be neutral. However, when it comes to line one and line two I'm not sure which is which. If you flip the cord the other way, the center is always going to be neutral no matter which way you're holding it. But l1 and l2 are going to be in different positions depending on how you're holding the cord. Is there way to know what's the proper way it should be facing? I'm thinking the flat side of the connection should be facing away from you where the center of the crimp should be facing you. Is that correct??

Thank you SO MUCH !!! You are a great person for doing this video.

Very helpful video thank you

Perfect video thank you

How can I connect this type dryer to a 220v grid?

Thanks for the great video!

Thank you!

Thanks bro! Very helpful!

Thank you helped a lot

Great instructions. Thank you

Thank you, I greatly appreciate you.

You safe my life, thanks!!! 😅

This helped me out a lot but now I don’t know what to do with the wire cover plate. When I had the three wire on there it was fire and it just went underneath it but with the larger four wire cable it doesn’t fit. Unlike the one shown in the video where the cover panel doesn’t go over where the cord goes into mine does.

Thank you so kindly

Thanks for the help

Thank you great work 👍

THANK YOU

Thanks 👍 good video

I appreciate u big dawg this was a big help 👍🏾

This video agrees with my manual for dryer. I think that goofy ground/ neutral wire moving is needed to avoid bonding issue ?

Very happy 😃. Very helpful.