Freelander 1 TD4 Turbo Boost Pipe Upgrade

Рет қаралды 12,265

Күн бұрын

An easy and cheap mod to the Freelander 1 TD4 trurbo boost pipe for a better/smoother flow resulting in better performance.
Parts from here:
180 Silicone Pipe: www.autosilico...
Reducer Silicone pipe: www.autosilico...
Straight Alloy Pipe: www.autosilico...
When ordering the alloy pipe, call them to say you need it to be 310mm long with a rolled bead at each end.
The size of the longer pipe is 57mm/310mm, the silicon elbow is 57mm and the reducer pipe is 57mm-51mm

Пікірлер: 19

@silverfox4113 18 күн бұрын

Brilliant video thank you 👍😊

@AUDIDOIT 5 ай бұрын

Superb little mod 👍

@odsmala 9 ай бұрын

Do you have any dyno spec before and after? That can't do that much of power difference to std spec?

@freetimeonline 9 ай бұрын

Hi, I don't know of a dyno near me that can take a 4x4 so I don't have any numbers or graphs. As I said in the video, it doesn't make a huge difference but it does feel a bit more responsive as the smoother air flow allows for the turbo to spin up a bit quicker. Note that it will not create any more power, (the remap did that) but it does change how the power is delivered.

@GasManLS7 6 ай бұрын

How is it after 4 months? Still going strong? Anything you would have done differently? I'm about to do this on mine you see, your video is very helpful!

@GasManLS7 6 ай бұрын

Also do you know what the difference is on the Facelift version? I see muddymods sell different hoses for them just wondering if the ally pipe needs to be a different length

@freetimeonline 6 ай бұрын

Still going well, as a test I fitted the std manifold back on and it felt a bit sluggish on acceleration, a slight delay.

@freetimeonline 6 ай бұрын

@@GasManLS7 the pre facelift has a longer pipe from the intercooler to the manifold as they don't have the temp sensor, the manifold is the same as the facelift models so the alloy pipe length should be the same as the point where the manifold conencts to the intercooler pipe is in the same place, I hope that makes sense.

@GasManLS7 6 ай бұрын

Perfect thanks for your help

@freetimeonline 6 ай бұрын

@@GasManLS7 thinking about this, you will need a joiner and step up pipe as the alloy pipe diameter is bigger that the intercooler hose, I show this in the video.

@bogdandnila8062 10 ай бұрын

Can I know the size of all pipes you use and how long is the long shiny tube please

@freetimeonline 10 ай бұрын

Hi. All the details are in the video description.

@bogdandnila8062 10 ай бұрын

@@freetimeonline tnks

@bensandford3806 6 ай бұрын

Hi mate can you tell me the length and diameter of the pipe you have used please I’ve watched the video a couple of times but there is no mention of this thank you

@freetimeonline 6 ай бұрын

I have linked to each product in the description, the size of the longer pipe is 57mm/310mm, the silicon elbow is 57mm and the reducer pipe is 57mm>51mm. I hope this helps.

@n-amchef 7 ай бұрын

Hello, is ok if i use a 300mm long alloy tube? i do not find 310mm anymore... thank you👍

@freetimeonline 7 ай бұрын

that should be ok but if you read my comments you will see that I mention about getting a custom length from the supplier.

@n-amchef 7 ай бұрын

@@freetimeonline Yes i read it before, but i am not from UK, and i will do not the order from there, because all taxes and shipping will be bigger then product himself (i am from Romania) but i can find same product here, and i find just 300mm long... Thank you for your answer and congrats for the videos, a lot of nice things i learn it from your videos. Hope you will do new content about tips and tricks for Freelander MK1.