Freestanding Tub Insulation: Penguin Chiller Cold Plunge!

Рет қаралды 1,134

5 ай бұрын

Freestanding Woodbridge 67in stand alone tub insulation. This works so good I highly recommend it to anyone installing these tubs for bubble baths or to freeze in a cold plunge. All items used in video are below.
Tub in Video: amzn.to/3RWkcEn
Penguin Chiller: www.penguinchillers.com/?rstr...
Foam Gun: amzn.to/3GTxHhN
Foam Cleaner: amzn.to/47e6dhw
Foam Used On Tub Sides: amzn.to/41AAS7k
Foam Used on Tub Bottom: amzn.to/3vjme8o
Pipe Insulation: amzn.to/47cRwLD
(This size works great on 3/4 tubing)
Custom Cover: amzn.to/3RV6OAc
(My order was 69in x 34in, 4in thickness, no slip bottom, side gussets, Invisible Grid Gray. It took 3 weeks to come in)
Plunge Build Video: • PENGUIN Chiller Cold P...
Mower Mike’s Tool Store: www.amazon.com/shop/mowermike
Mower Mike
Disclosure: The Amazon link above is an Amazon affiliate links. This means that, I do earn a very small commission (at no cost to you) if you click the link and finalize a purchase.

Пікірлер: 18

@PhD_Lawn_Service 5 ай бұрын

Your genius has no boundaries

@MowerMike 5 ай бұрын

Haha not sure if that is a compliment or not but I will take it!

@jeffreyly2120 3 ай бұрын

Thanks so much for this. I think this vid will get a lot of ever green views cause I been looking for something like this for cold plunge. Not many people taking this approach

@MowerMike 3 ай бұрын

Hey thanks, that means a lot hearing this. To me this is the way that makes sense. Check out my cold plunge video for some more giggles. Good luck on your build. It has worked great for me

@_multiverse_ 4 ай бұрын

Im gunna do this to my new tub just so it stays warm longer.

@MowerMike 4 ай бұрын

I think that is a great idea, I would do the same. It holds the temp like a beer cooler now.

@user-md9uu4dh2o 4 ай бұрын

How did you get the in and outlets? DIY?

@MowerMike 4 ай бұрын

Check out the Amazon links in the video descriptions on my tub insulation and cold tub videos. Everything I used is there. Good luck

@thegristleking Ай бұрын

How's this system holding up a couple months on? Did you ever build a frame around it?

@MowerMike Ай бұрын

It is doing great. The chiller is a bit overkill for my setup but I love it. Will get to temp quick and holds it like an ice chest.

@thegristleking Ай бұрын

@@MowerMike badass, thanks. Have watched a bunch of these DIY vids and appreciate your approach. Did you end up moving it around as much as you thought you would (taking it off site to go chill somewhere else)? Looks like it's living on horse mats, do you just put a bath mat down to soak up any water, or has that not been something you GAS about? Finally, any thoughts to building out a full frame so it looks all fancy? Again, nice work!

@MowerMike Ай бұрын

@@thegristleking Nope it hasn’t moved. It is on housemats and I have a little bath rug infront of it. Works great. Personally I like the tub approach and is easy to seal up. I have another video on me insulating it. Is fun to build one. Use my links in my video description to buy anything if you go with a tub or this chiller. Have fun

@thegristleking Ай бұрын

@@MowerMike yeah, I think you've got the best setup out of the ones I've seen. I saw the insulating vid you did. Appreciate you putting all this out there. Will use your links, I know those are helpful on the rev side.