Freshly Rebuilt 300 6 with a comp 252H cam kit

Рет қаралды 100,988

Reed Parkinson

10 жыл бұрын

Ford 300 6 with a 252H cam in a 1984 F150 SWB Truck

Пікірлер: 33

@DeanMk1 3 жыл бұрын

Reed Parkinson, So its now a few days past 7 years since this video was posted. How did the truck work out? Did you noticed much of a change in power and fuel mileage?

@ReedParkinson1974 5 жыл бұрын

The serpentine setup came from a newer EFI 300 6

@ReedParkinson1974 5 жыл бұрын

I wasn't looking for speed when I built it. I was looking for pulling power and I got it fine with that setup. I asked others about doing a Holley setup on it and they told me if I didn't mind it drinking a lot do that. I got it tuned so fine with that carb that you could barely hear it under the hood at idle. Plus I achieved very nice pulling power at around 2000 rpm's at 65 mph. I could also cruise 30 mph at a 1000 sustainable rpm's which was very nice.

@ryanfeltner9942 3 жыл бұрын

What kind of intake is that and we’re did you order it from Iam looking for on in the worst way can’t afford 500 for one

@DeanMk1 3 жыл бұрын

@@ryanfeltner9942 That's a stock intake manifold.

@Rcarr3 7 жыл бұрын

What kind of rebuild kit did you use? I'm rebuilding mine this spring once I'm done plowing.

@mudflapq 9 жыл бұрын

very nice ................................

@AngryDogPerformance 9 жыл бұрын

any newer vids yet?

@zodar1400 8 жыл бұрын

what did you use for a donor engine to get the serpentine belt parts?

@ericgatter2830 5 жыл бұрын

You can get them off the late model with the 300. I believe like 90-94/93

@terrykehler1916 3 жыл бұрын

Anything 1987-1996 will have the serpentine setup

@TheGeekwad 8 жыл бұрын

I couldn't help but notice that fox body wasn't doing any freeway pulls

@kennethlocklear5050 3 жыл бұрын

How much power did u pick up

@jagg5474 Жыл бұрын

You pick up none till you put a 4 barrel on it

@Em6726 9 жыл бұрын

Nice motor. Will the later model 300's fit a 66 galaxie

@aeo177 Жыл бұрын

It's all about the sump setup

@adamgrotefendt540 9 жыл бұрын

Is that stock exhaust?

@legostar55 6 жыл бұрын

Adam Grotefendt Yes and it sucks

@legostar55 4 жыл бұрын

WHY IN THE HELL would you use that GOD AWFUL stock exhaust manifold. At least switch to the EFI manifolds.

@mechanicalking 6 жыл бұрын

How dare you keep that one barrel

@titanrik8411 6 жыл бұрын

mechanical king

@titanrik8411 6 жыл бұрын

Need 2 barrel carb for 5.0 / 302 off a mustang, offenhauser intake Manifold

@jessedrhodes 8 жыл бұрын

Will it get it now

@marshallmcdowell3369 8 жыл бұрын

Advance the timing a few degrees

@Nobodyofimportance2u 6 жыл бұрын

Does the truck feel stronger?

@masonbennett2855 3 жыл бұрын

Going for gas milage thats funny

@seapeddler 9 жыл бұрын

Is that an '85 or better head?

@edwinstorz702 6 жыл бұрын

Don't Burn that Starter up.......ouch!

@brantardrey7360 3 жыл бұрын

Everything I've built in 50 years regardless of what it is usually starts up without too much cranking because I do all the preliminary checks Andre adjustments before I ever turn the key like a lot of these guys they start stuff it backfires doesn't run right dies or something or they forget something and there a shop on TV