+ULCFilm Thanks

which one is thicker 1/8 or 3/32?

+substandardlysubpar I agree, it has a look that's not horrible, but since the Part 3 is one of the freshest hockey masks in the series I'd rather this one be smooth. I think the cracked look could almost work for the remake mask or something.

Outside the Box Reviews it could work on the Freddy vs Jason mask or it could look good as a part 8 mask after he got hit with the toxic waste.

mask for part the does have crackling do your research

@Thomas Blagg there's cracking but it's more up and down instead of what happened in this video.

Agreed. I bought this same mask, first thing I did was strip it down to the raw, porous plastic. Clean your canvas before attempting to paint.

SeedlessJellyBeans would still recommend to sand it

+vaughn marshburn These are supposed to have a legacy to screen used props as well, so I'm pretty content with what I got. Fright Stuff looks interesting, though. Maybe I'll try one of their kits in the future, the remake perhaps.

So to avoid cracking you are saying to use gloss on gloss? Like I spray the mask with let's say gloss dove white spray paint and then I finish it with gloss clear coat finish? Did I get that right?

Jason K start with gloss if you want to end it with gloss.

+TheNewBlood Dan ok cool. Thanks

Interesting. Do you mean basically cleaning the mask before beginning paint application or is there some other trick? Definitely open to learn more for next time

basically sanding the mask so the paint sticks. the plus point you have if you haven't done this is the paint should come off easy enough with wet and dry paper and boiling water. and soap suds. check out crash creations on Facebook to get photo's of the part 3 look. it's all trial and error. I did 5 cheap masks before buying a jdf. and got my technique right . check my vids to see how they turned out on my horror collection..jc wilde used to have a tutorial on KZfaq also. you could get some tips from there. but it's all to do with finding what works for you best.

+torque the prisoner Thank you!

The mask broke so they made a replica but if it was still good it would be around $100-150

thank you , for having responded to my comment , but it is and was for information purposes only . Then among other things since I'm a fan of Jason Voohrees I was referring to the original mask and not the copy of the mask due to marketing, I meant the mask he wore while filming , I was content not a facsimile , I wanted to tell him same , to be understood, however, thank you just the same.

the original hero mask from part 3 no longer exists,the part 3 stunt/part 4 hero mask is in the possesion of a private collector ,who it was sold to by dick warlock.

A line 24 snap setter tool. Here's the link to the ones I have. www.amazon.com/Leathercraft-11pcs-Setter-Install-Button/dp/B00QWE5PR6?crid=FJUH7Q4DENZO&keywords=line+24+snap+setter&qid=1534835208&sprefix=line+24&sr=8-13&ref=mp_s_a_1_13

Kissai Sith Jen'ari it’s made out of abs. It’s the jdf studios one and it says on the website 0.93 but I don’t know what that means

You can heat and reshape it and you can buy it in 0.060

@Thomas Blagg I know. I don't know why I thought that three years ago. Apparently two different things got combined, perhaps thinking I had read it in an interview with him while it was actually another mask maker who said it. I might have meant Crazydog500 and typed Crash Cunningham, but I'm not sure if he does that either.

@Thomas Blagg ...or maybe it was this kzfaq.info/get/bejne/gJ5jhNWovcCUeXk.html

Line 24 snap setter tools. Here's a link to the ones I have. www.amazon.com/Leathercraft-11pcs-Setter-Install-Button/dp/B00QWE5PR6?crid=FJUH7Q4DENZO&keywords=line+24+snap+setter&qid=1534835208&sprefix=line+24&sr=8-13&ref=mp_s_a_1_13

They aren't meringue. Meringue is just the color most people use because it closely resembles the color they used in the movie. They used a base coat of almond topped off with the color camel. The closet you can find to camel in spray paint nowadays is a color called buttercup or buttercream. But it's like $15 and you can only get it online. That's why most people use meringue, because it's cheaper looks close enough and can be found at hobby lobby.

i learned how to fix it now tho

OK COOL

+Tupac Spock I think it's 1/16" thick ABS. It's plenty strong and fairly flexible

Is it strong enough to use as an actual goalie mask in a game of hockey?

+Tupac Spock I doubt it. Its not designed for that.

+Tupac Spock I doubt it. Its not designed for that.

OK thanks

I actually got my friend one for Christmas and it's pretty cool. I'll have to get myself one eventually, but I think part 7 will be next

I have no interest in buying any more of those figures. I'm not at all impressed with the McFarlane AC line

Oof! I'll tell you this much - there's a 1/32 difference between the two.

+C-c-c-ombo Breaker! Haha. It was originally going to be the disco theme from Friday the 13th Part 3, but I got a copyright claim on it so I decided to use royalty free metal instead.

Outside the Box Reviews Well the royalty free substitute was pretty well done in all honesty. So the upsetting news of having to change your original idea due to a copyright claim, isn't too upsetting after all. \m/

Jake Steel 0/10 No food for you here.