Front Tweeters UPGRADE, Toyota Corolla - Upgrade to Rockford Fosgate Tweeters

Рет қаралды 46,388

Күн бұрын

Upgrading the front sailpanel tweeters on a 2014-2018 Toyota Corolla, with a pair of Rockford Fosgate Tweeters.
Amazon Affiliate Links
➡️ R1T-S Tweeters (Pair): amzn.to/3GFLyaT
➡️ Tweeter Harness Adapters (Pair): amzn.to/40EuN99
➡️ Dremel 4000 KIT: amzn.to/3JSsKbq
➡️ Soldering Iron+:Solder: amzIf there is ever an ignition problem, it should be fixed as soon as possible, to prevent engine damage.n.to/3XpheI0
➡️ Heat Shrink: amzn.to/3RS6PmP
➡️ High Quality Electrical Tape: amzn.to/3XjatqO
➡️ C-Clamp: amzn.to/3JWHB4L
➡️ Painter's Tape: amzn.to/3lnPPsB
As an Amazon Associate I earn from qualifying purchases. If you place an order, thank you for supporting my channel!
00:00 Intro, Parts and Materials
00:18 Remove the Old Tweeter
00:36 Installing the new Flush Mount
01:54 Using a Dremel to Make the Sailpanel Opening
03:53 Sanding the Opening In the Sailpanel
05:45 Connecting the Wires to the new Tweeters
08:01 Installing the new Tweeters in the Sailpanel
08:20 Installing the Tweeters on the Car
⚠️ DISCLAIMER:
Use of the information in this video is solely at your own risk. The creator of this video assumes no liability for any property damage, injury or expenses incurred as a result of any of the information contained in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result.
The creator of this video makes no claims, promises or guarantees about the accuracy, completeness, or applicability of the procedures and instructions contained in this video.
Any injury, damage, or loss that might occur as a result of improper application, improper use of tools or equipment, or from the information contained in this video, is solely the responsibility of the user.

Пікірлер: 42

@CleverFix Жыл бұрын

If you enjoyed the video, please give it a *thumbs up* 👍 Your support is *greatly appreciated* . Also check out my *STEREO Upgrade* : kzfaq.info/get/bejne/gKiehct7r7SycXk.html *REAR SPEAKER Upgrade* : kzfaq.info/get/bejne/pbJlrb15lZ-6pXU.html and *FRONT SPEAKER Upgrade* : kzfaq.info/get/bejne/j6yUhciGz6nJpWQ.html

@giovannifraioli2428 8 ай бұрын

EXCELENTE VIDEO, INSTALE ESTOS TWEETERS EN MI COROLLA 2016 Y EL CAMBIO FUE DEL CIELO A LA TIERRA, GRACIAS, LUCEN COMO SI FUERAN DE FABRICA.

@iTzDaNiiLo Жыл бұрын

I was looking for a video on this like a week ago and you came out with this video. Clutch! Thanks for posting

@drosos-vr9fl Жыл бұрын

Thanks a lot for your infos ! I made the project i am very excited.

@CleverFix Жыл бұрын

That's Great!

@armandoramos1949 7 ай бұрын

Thanks for sharing, made that looks so easy.

@CleverFix 7 ай бұрын

You’re welcome 😊

@greenlife1041 Жыл бұрын

Excellent job 👏

@CleverFix Жыл бұрын

Thank you 😀

@Lemiak Жыл бұрын

Excelente!!! Bravo!!! superrr

@adamthewoodworker2571 8 ай бұрын

Thanks for your detailed responses. One last question, do you have a video where you demonstrate the best way to do/best place to put the grounding wire for an amp on a 2014 toyota corolla

@joewhattoff8754 Жыл бұрын

Canada man, they sound pretty sweet. The voice and instruments really pop

@CleverFix Жыл бұрын

Yes they sound great.. It took a few days to adjust, at first I thought there are too many highs, and I turned them down.. but eventually I turned the highs back to normal and it sounds great. I guess I was used to flat music without highs.

@omarandres4665 4 ай бұрын

@@CleverFixHow do you adjust the highs?

@sulentickresimir9963 8 ай бұрын

PERFECT

@khalilJon 11 ай бұрын

Hi clever fix, I have base model Corolla didn’t came with tweeter can I buy them tweeter and plug and play

@stanl2249 10 ай бұрын

Sir,which tweeter speaker best install with sony car tape

@edgarcamacho5580 4 ай бұрын

Como los puedo conectar si no tengo adaptador?

@LAZER1LAZER 9 ай бұрын

Will there still be a sound quality increase without an amplifier? I'm assuming these are low impedance speakers if you're using the stock radio

@JosephMustafa-kx6hg 5 ай бұрын

The answer is yes with high sensitivity speakers - like every Infiniti reference speaker they win be louder and cleaerer even on stock

@00M1 Жыл бұрын

Do you think there is a way to keep it looking OEM? (After the upgrade)

@CleverFix Жыл бұрын

Paint the mount with flat or semi-gloss black paint before installing it if you don't like the white writing. There's no other way, installing the tweeter without it's mount will not sound good (double grill is bad for sound).

@scottwatrous 10 ай бұрын

If I dont have a solder gun handy any reason not to use butt connectors here as done with the 6" speakers?

@CleverFix 10 ай бұрын

You could use butt connectors yes. I prefer soldering when possible, that way if there's an issue I know for sure the soldered connection is not causing it. On the speakers I had no choice, because it's aluminum to copper, so it can't be soldered. Make sure to squeeze the connector really well.

@joeponder9668 Жыл бұрын

My dog, enjoying the video so far, are you from Hungary? You sound identical to my buddy who lives there. I am doing this same thing for some skar tweets.

@CleverFix Жыл бұрын

Nice! Skar tweeters are great.. I was going to get some, but it was harder to obtain them than the Rockford, and I figure the quality will be very similar.. The Skar may be louder.

@snaketripp 10 ай бұрын

is it required to dremel into the plastic? in other words can the new tweeters fit into the OEM housing ?

@CleverFix 10 ай бұрын

They fit, but the tweeters have their own grill. They are not designed to be placed behind another grill, and will sound quite bad. I would rather not do the upgrade than place them behind the grill, that's how bad they sounded to me.

@mrchad97z49 3 ай бұрын

never solder speaker wire. Solder adds a lot of attenuation and the heat does the same. The neat result is more attenuation is less sound.

@CleverFix 3 ай бұрын

Pre-twist and solder properly, and you'll get a good connection. Solder is used everywhere. Even the factory solders from the spade terminal the coil of the speaker, and in the car stereo the pins for the speaker wires are soldered to the circuit board. pasteboard.co/MK5GQgVCE42Z.png

@adamthewoodworker2571 8 ай бұрын

Do you know if they sell the mount part by itself?

@CleverFix 8 ай бұрын

They're sold together,.. Most brands will come with their own flush mount. Check the included items in the manual for the tweeters you're considering, and it should show what's inside as well as the cut-out template, with the width for the hole required so they fit in perfectly. Here's the R1T-S: rockfordfosgate.com/rftech/library/2012/4_speakers/rf_primer1speakers_cutout-irs.pdf it's 1.83" , top right of page 4.

@aliomer9182 Жыл бұрын

👍👏👏

@toddpainter8615 Жыл бұрын

Why wouldn’t you just mount the new speaker in from the back?

@CleverFix Жыл бұрын

Double grill for tweeters makes them sound horrible. The grill it comes with is optimized for the tweeter to sound good. Any other grill or obstruction of the sound will reflect the sound and it sounds bad, I tried.

@mariw436 Жыл бұрын

What about capacitors? OEM tweeters have them built in

@CleverFix Жыл бұрын

Yes the Rockford Fosgates have them built in also, they're at the back, I show them in my Unboxing video kzfaq.info/get/bejne/pJ5ngrGm26-sdJc.html

@nancycusano3331 5 ай бұрын

Tweeter is to big for mount

@rezaghahreman86 Жыл бұрын

Thank you for this video. I got a question about Bluetooth that is not related to this video. I have issue with my Toyota Corolla Bluetooth. When I get a phone call over Bluetooth, it is very noisy. The other side of the call cannot hear me. Do you know how I can fix it? Thank you!

@CleverFix Жыл бұрын

Did you try another phone? You have to first find the problem to fix it. If it's bad with every phone, then it's the car at fault. Try another phone first. The microphone is in the dome lights right above you.. so if there's something wrong with the microphone, it could be replaced. Lastly if there's something wrong the stereo, you can try another stereo from a junk yard. I will be posting a video on how to upgrade the stereo with a Pioneer within a month or so.