This seriously is one of the more legit RB install videos on youtube. I like how cleanly the rear was done & how actual sealer was used instead expanding foam.

Props to you guys, it is the best job I've seen on youtube on the rear quartel panel sealling operation. It is a really clean job. Congrats. If I had to change one thing I would have first spray painted the edge where you grinded it just to be 100% sure rust won't get there

Really clean and thorough work guys....best rocket bunny install i've seen to date. Hopefully you encourage other shops to follow suit.

Hands down most professional install ive seen on YT.

Ken is the rocket bunny master! 👏

Once again great content and very informative.Also Ken is killing it!Thanks for the vid guys :)

1) Watching this at midnight after work probably wasn't the best idea, being the considerate bastard that I am, I kept fiddlin' with my speaker's volume as to not wake up my housemates. 2) While I like RocketBunny kits, I couldn't possibly bring myself to put my 86 under the knife! 3) I surely hope he gets wheels; and doesn't use massive spacers! 4) Brilliant video, as always!

This makes me appreciate the high prices workshops take for this kind of work here in Germany. It does require finesse and knowledge.

One of the best RB install videos I have seen. Made it look easy AF. Im sure there is a lot more to it but that's the same with anything when its watching a video VS actually doing it.

Thanks for sharing this piece of artwork with us. I learned many things from this video. 1 day I'll do mods like this on my car.

To say I am not a fan of rocket bunny stuff is an understatement, that being said good job on the video and the installation.

So happy you guys didn't do this to your Scion-"all go no show"-FRS, I hope you guys do more with that thing.

Ken you the real mvp such a tidy operator

great informative video. will definitely refer to it when I install my over fenders

This is the most detailed (bodykit)tutorial video I've ever encountered in yt

Nice clean install, well done, Ken.

Awesome! I'm 15 now and planning to get this car when I turn 20-23, it's been a dream car of mine for a long time now.

What this needed was a side, front, back and birds eye view of the finished product.

I always get nervous watching people cut up cars but another job well done by Ken!

Props on the workmanship!

So cool how you guys can make an 12minute episode without met getting the urge to skip some pars, It's a bit of youtube magic we still need to learn..... Thanks for yet another cool episode Cheers TwoBeardsOneCar

Now this is professional work

I really enjoyed this ! Very good job :)

Quality work Ken .

Solid video! one of the best. explained everything really well

very informative Ken! good vid

But you didn't really cover how you extended the inner wheel wells.

Nice work ken !

Great workmanship...

About TIME!

awesome job...very neat install.

really informative compared to other videos, thank you ken for the guide!

Really enjoy the build

really really clean job ..awesome !!

88332 subbers, you guys deserve much more!

I bet he cooks a mean lumpia with that apron, great vid.

Ken looks like he works at home depot

omg love the channel bro...I'm 14 and this is my dream car😍now I know what all somewhat to do..keep up the good work

Good job guys looks mint

Very professional. Neat job!

top notch work

awesome video, very discriptive

This is a really great guide on how to install flares/overfenders on any car really. Though I'm surprised you guys didn't use some foam tape or do some caulking between the edges of the flare and where it meets the original guard.

I like Ken, he talks normally rather than like he is in some kind of 80s porno. One suggestion tho, 12 minutes of that music loop could make you go funny.

I want these guys to install my kit!!

Great job!

damn Ken is a pro!

awesome job guys it looks bad as the rocket body kit looks fucking awesome!... Super job guys can't wait to see when it's finished finished!...

Nice job! I wish you were located local to instal a rocket bunny kit on my car !

Well put video

You guys did a great job installing... I just donèt understand why people insist on this kit unless their rocking some high power.

verry professional

Nice to see some addressing of the water/rust issues, but I'd be gooping that thing up with inhibitor like crazy while I still had access, assuming the edges weren't welded. Hopefully those rivets are stainless!

Another tip you can backup rivets with washers (rivet washers) so they wont pull through the plastic

When you rivet in plastic, you can put a washer (same size as the rivet)on the back side to keep it from pulling through. It will pull way tighter too.I used to do it when fixing bumper covers at my old shop.

Ken with the snazzy apron

It is very important to use primer under the seal!

I love this installation, can you do my subaru brz please?

Wheel spacers are like push-up bras, they make things look good, but when you start taking things off you realize it was all an illusion.

You sure you guys were not minitruckers first lol. Nice job 👍🏼

i did a widebody on a porsche 10 years ago. i had some really beautiful anodized rivets. seems those would give you a nicer look. on the bumper couldn't you stick a small piece of sheet metal or aluminum behind it to give the rivet something to grab?

Hurt to watch you guys cut up the car but the final results came out amazing.

5:28 The moment the internet unanimously went "JUST GET A GUARD!!" :P

Hey! Great video can you please link me where you got the fenders.

What did you do for the side markers in the front? Take them off and their assembly or cut it off?

Once the bracket for the rear bumper is removed, is it re-installed when you're finished or is there another way to pull the bumper and fender together?

is there anything to do about the visibility of those screws? so the body looks more uniform all around

Sheet metal body kit best or fibre glass body kit best bro 🤔

3:27 rip headphone users

Do you NEED to weld or is there an alternative to sealing the fenders after cutting and folding.. I dont have a welder 😕

What size rims went back on this? Width and total size. Or what size spacers to make the offset work?

i have a question,if you have a toyota gt86 and you change its whole frame material to carbon fiber,will that change the car's identity to a new car or is it still a gt86?

I would've personnaly used a wider head aluminum rivet like Speedway Motors sells but maybe just me. Plus they come in black so they'd blend in better.

What size cleco pins and nutserts do you use?

Would you paint the fender before applying the overfender with rust paint?

what happened to the brz drift build?

Idk I would've just sprayed some quality 2k epoxy primer over those welds, then Add a good automotive seam sealer over, but that's just me

what types of tools are needed? can you list them, please :)... Im quite new, but I plan to install a kit by myself.

U guys made this look so easy to do.. its so clean too not so haggard hahahha... dude prolly a filipino whahah. Wher r u guys located.. ill prolly let u guys do mine in the future

@Speed Academy how long did it take? Looks awesome. I am not sure about to put a RB kit on my GT86

Hey guys way you located an is the rocket bunny kit hard plastic or fiber glass can the kit flex or if you touch something you brake the kit up? Just asking befor l Buy the rocket bunny kit

Soo how does It do during the winter and the rainy season?

How do you know how much of the body panel to cut off? And why do you do that in the first place? after watching a few videos I'm still confused. Great video as always guys! It's the most descriptive I've seen yet!

Can Ken possibly do my RB installation on my FRS? Where are you guys located at?

May I ask what wheels you have on the frs and the specs?

Hey Guys, do you know how much it was to Paint Match the RBV1 fenders to the asphalt color? Looking to do the exact same

I've been playing with the idea of a RB fender kit, but I keep coming back to the idea of just buying a whole fender that's wider, and then only worrying about installing the rear RB fender. Does that make more sense or do ya'll think it would it mess with the overall look?

i always wondered, water doesn't enter between the quarter panel and the rocket bunny?

How do you figure out where to cut on the factory panels exactly ??

So for the front how do you seal the fender so it doesn’t rust ?

what rivits did you guys use?

How did you paint match the fenders?

I'd love to see more Ass2000 track and build videos

How much of the kit did you guys have to shave in order to get it to sit?

Can you please tell me what sealant you used

What’s sizes of rims I have to buy for a width body kit?

What’s the correct size spacers to install ?

Nice video guys. Where has your brz gone? Haven't seen it in a while.

Hey guys I got a V2 Rocket bunny kit on and i need help. can you please tell me how can i still keep the front fender guard liners because mine came off and now i dont know how to exactly put it back.

Where did you get those rocket bunny fenders?