No the R1M has the electronic suspension which is not the best option for the track. - Van

Anxiously awaiting video of this bit of kit in action!

My 2020 has the blipper stock, but I watched all of this anyway. LOL That's why my garage is a mess ..... I'm watching youtube all day.

i get scaried when i saw you using that " fire launcher" instead of a lighter to shrink that tube... man... all the way, thanks 4 another great video

This thing is absolutely flawless on the track. Too much fun, very well engineered product.

I need this so badly in my life lol💪🤜🤛

Hmm! Brian's right hand is covering a lot of the video footage...maybe the camera should have been moved over to the left. But thanks for posting up.

I bought the woolich racing kit. they actually use the exup servo plug for the qs and autoblipper. they only use 1 sensor. so strange how different these two companies go about the same thing but in two completely different ways.

Great video man thanks a lot learned a lot 👍👍🇬🇧

Almost bought it, just saw the connector for ECU to computer cost $450 US, the blipped just cost $400 US

Awesome video, Van. Quick question, is it normal for it to be resistant to down shifting without the clutch if you’re not relatively high in the rpm range. I know you typically wouldn’t shift unless you were, but thought I’d ask anyway. Thanks!

Great Video! I had my 2017 R1 tuned by MooreMafia for SC Project Exhaust. Will this Flash Tune override the change MooreMafia did on my ECU?

Has this design been updated to a single push/pull sensor? Mine only came with one sensor for my 2017 R1. Thank you Van.

Awesome job

2017 R1 seem to be a different harness. Isn’t working with the same steps from the 2015.

The instructions from FT show the wire on the left side

Van, when are you going to add a 3rd row of screens?

What’s the difference between the OEM for 200 vs the 720 you installed? Why flash?

his hands move like Dave Palumbo

Hello. My bike R1M is 2017 but ECU 2015 after flash tune and open Autoblipper. But anyway Autoblipper is doesn't work. I try so many time with that. I follow with installation guide 2015/2016 and 2017 but still doesn't work. How to make it work? Pls Help. Thank

Hi Van, how do you feel about the recall from Yamaha for the 2015 R1? I'm pretty sure you've done alot of track riding without any issues with your gear box. And how do you feel about a Yamaha dealership mechanic stripping your engine to carry out the modifications to the gear box? Do you think this modification is really necessary knowing that you've ridden your bike hard without any issues since you've had it?

I have an r6 with a full bazzaz system and I love the feel of my quickshifter; however I would like to add an auto blip system without removing what I have spent so much money on. What are my options as an add-on?

Hi Van, how's the downshift function? Any auto rev before downshift? Or just depends on slipper clutch?

will this work on the 2016 yzf r1s ? I'm wondering if it will since the r1s does not come with a factory installed quick shifter. or will I have to buy a new harness or ecu to get this on the bike? any info will be much appreciated. great vids and great site keep it up!!!!

Can you please get your hands on the translogic qshifter and autoblipper and give your honest opinion on them and what it takes to run that system, but not just for liter bikes.

This is going to sound very stupid but I gotta ask because I don’t know...the device still works upshifting correct?

I’m having some trouble I bought the auto blip for the 2017 r1 and I don’t know which wire it replaces? And I got the ecu flashed and flashed it with the graves 3/4 that I also bought from you guys and after everything I got a check engine light of gear shift position circuit low, what did I do wrong?

Is there a way to adjust the sensitivity on how soon it engages when downshifting?

Hi, I have a 2015 Yamaha r1 and I just bought an FT auto blip clutchless downshift kit from Revzilia, and it comes with only one sensor. I am not sure if It needs to replace the stock sensor or It needs to be put under the stock sensor because the stock QS can only shift up.

I just bought an R1 and seemed like the stock Quickshifter was not working, I took it to a Yamaha Dealer and they told me that my ECU was "cracked or flashed" by an FTECU license and it used to have a FTECU autoblipper so thats why the stock QS is not working. Do you know if I will need the ECU license to be able to enable the FTECU autoblipper?

How did you print out the instructions? I have one for my 2017 R6 but don't have the steps and I don't know how

hey Brian, just wanted to confirm, ive been trying to get some info online and this may be a stupid question, but if im correct, the 2015 R1 does not have an auto blipper? Thanks!

Awsome video, thanks, made my install a breeze. However, did everything without an issue including enabling the auto blipper with the ECU bench kit but it won't work. QSS works just fine but when I try to downshift without the clutch I dont get the auto blip and is super hard to push on the shifter. Any thoughts on what could be the problem?

Is there a clutchless auto blipper for a 2015 R6? It has a fly-by-wire throttle so i know it's theoretically possible.

With so much upgrade would it make more cost saving sence to just get a R1M version?

With the stock shifter, does the Push sensor go at the top or bottom?

Hi, quick question, is that an aftermarket belly pan on the bike here? Thanks!

That's a cool setup but is there a setup like that from dynojet power commander?

Very well played out. I ordered the blippa because of your video, but FT ECU have poor sales, I wasn't given any information after my order, I waited 10 days and then had to open a (ticket) - what's that about? Then I was told that they didn't really know when they where getting stock! Surely if they "make" them, they wouldn't have to wait for stock? I asked for a refund - they were brilliant at that, even changed status on order straight away. Shame they couldn't do sales assist first. Wasted my time hanging around waiting for an order that wasn't happening. Keep up advertising - free stuff to you. But poor sales to us bikers that are purchasing!

Can i use this on my 2019 mt10?thanks

Hi I’m planning on installing and quick shifter on my 2017 R6 do it need to do anything do the ecu..?

I've fitted the autoblipper and ECU flash, my 2016 r1m won't start now and comes up with orange SCU light and "Err" in top right corner of the dash. Need some help in finding what's gone wrong. Thanks

You said 'downshift'. So am I losing the ability to use it for upshift like the standard quickshifter or by installing this I will get the up and down quickshift? And do I interrupt the QSS in the YRC settings?

In a broad sense, what would you say is the average price for an auto blip quickshifter for a sports bike?

Do they make this for the 2017 GSXR 1000 ABS model?

How many r1's do you all work on or have worked on in the video ?

is there a company out there that makes a kit like this for an R6

hey will this work on a 17 fz10? and is it upshift as well? or only down

When Apply ecu racing magnetimarelli

Hi mate. I realy appretiate yours tips. But this time i stuck with ftecu autoblipper for yamaha r1m 2017. Is not working. I found out that is different wirening on 2017 R1M. Can anybody help me with this piece of kit get to work on my R1M 2017? Pleeeeaaase.!!!!!

Hello, does this kit come with everything needed that I can just reflash the ECU myself at home? Thanks.

So did you have to switch the connectors between the push and pull to work with the gp shift of no?

Hi, just wanted to know if i install this kit whitout flashing ECU, Does clutchless downshift will work ? Am i really obly to flash ?

Hey Brian, can you run the stock quick shifter (without ftecu!) in gp configuration???

Hey Brian! What brand of engine case covers do you have on in this video? Thanks

Hi this maybe a stupid question but will the stock up shift still work with this ad-on? Thanks,

Is this also a quickshifter?

So with this and quick shifter I only need to use clutch lever to pull off?

Hi Brian !! It works in R1 S 2016?

do you plan on getting the CCU data logger kit?

Does the quick-shifter system automatically adjust when you change it to GP-shift?

You need more PC screens man. That's amateur hour.

The color are not the same for the 17?! HELP

So will you ever have to shift again at all using the clutch or not? I hope not Bc if so that's exactly what I'm going to do?

What if you use the euro version in the U.S ?

Why do you have to talk with your hands all over the place? puhhhhh.....