Рет қаралды 16,703
Fujimi 1/12 Honda super cub C100
#scalemodel #motorcyclemodel #hondasupercub
*Index
0:00 Prologue
00:30 Wheel
02:24 Engine, Frame
07:37 Brake Kick-stand
08:47 Motorcycle carrier
09:28 Leg shield
10:05 Exhaust and foot pedals
10:57 Fender, front suspension, handle-bar
13:27 Luggage
20:54 Dog Rider
24:55 Complete Photo
Honda Super Cub C100
This is the first generation of the Cub lineage.
Steve McQueen (1966 C50) also rode the Super Cub.
The great thing about the Super Cub's design is that even after 66 years, the basic design has remained unchanged.
In Japan, 50cc motorcycles will disappear from the market due to stricter exhaust gas regulations.
The 50cc Cub, which has been in production since 1958, will also be discontinued.
The quality of "Fujimi" motorcycle model Spokes
It's really amazing!
The quality is such that I would think it was printed using a 3D printer.
The spoke thickness is 0.5mm.
If you try hard, you can cut it down to 0.4mm.
Separate spokes from Tamiya and Aoshima are good, but Fujimi's spokes are better in terms of thinness.
This time, I replaced only the spokes of the rear wheel with 0.4mm stainless steel spring wire and compared it with the front wheel that came with the kit, but I couldn't tell any difference.
On the other hand, I thought it would be better not to replace it because it could be painted.
Making
The frame and engine are one part, and are assembled by gluing the left and right parts together, but the actual car is also made by gluing pressed left and right parts together, so processing the seams is not a pain.
The detail-up area is almost invisible with the leg shield,
point of Add detail
plug cord
fuel pipe
throttle cable
front wheel speedometer cable
rearview mirror arm
Rebuilding the motorcycle carrier
Scratch building
Club bag
suit case
Motorcycle top box
guitar
Stuffed pig toy (I originally made a living pig, but it ended up being a stuffed toy.)
I had made a McQueen face for the figure, but it ended up being an animal face, so I decided to make it a dog face.
Painting
I painted super cub in red and ecru color based on the advertisement (You Meet The Nicest People) for super Cub exported to America.
The base paint was lacquer paint, and then enamel paint was added over it to add light and shade.
I added inking to make the light and shade clear and painted it like an American advertisement.
painting the frame
lacquer painting
White → Yellow → Shine Red → Red for dark areas
enamel painting
Add color changes with red and yellow
Inking with ground brown
Painting the leg shield
A color that mixes white with clear orange
painting the engine
Silver → Metallic Gray → Grand Brown → Dry brush with chrome silver and titanium gold
wheels, exhaust
Black → plated silver → water-based clear → dry brush with titanium gold → inking with ground brown
Honda has motorcycles with animal motifs such as DAX, monkey, and gorilla, so I would like to make them together with figurine with animal faces.
Thank you all of you!
Let's meet again!