FULL ATV ENGINE RESTORATION! I Made 2 HUGE MISTAKES!!! 😱 Yamaha Moto 4

Рет қаралды 1,550

7 ай бұрын

I finally got this Moto 4 200 Engine restored! I made 2 huge mistakes on this build! I dropped an o ring in the motor AND I messed up the paint somehow.
If you like what we're doing here at Toy Shop and would like to support us then be sure to check us out on Patreon! www.patreon.com/Toyshop9665?u...
Cleaning products from Pryme: www.prymemx.com
Motion Pro Case Splitter V2: www.motionpro.com/product/08-...
Using these links will help me out!
Toolbox Widgets
1/4" drive Socket Widget - a.co/d/29Ux2rs
3/8" drive Socket Widget - a.co/d/5cCi3mT
1/2" drive Socket Widget - a.co/d/8EsPl9s
Screwdriver Widget - a.co/d/5F7EB5Y
Wrench Widget - a.co/d/0qyVzIM
Wide Motorcycle Scissor Jack - a.co/d/fQLQypt
Narrow Motorcycle Scissor Jack - a.co/d/cGDv73u
Umbilical tank setup;
Moton Pro Aux Tank - a.co/d/2hMd2xe
IV Stand - a.co/d/hHiSSGU
Metric #2 Phillips - a.co/d/1qhV0me
Slide Hammer - a.co/d/e8bu3yW
Camera I use to film - a.co/d/9d39Jjm
Mic I use - a.co/d/0V4vNZ7
Visit us at www.toyshop9665.com to see what we're up to and to check out everything Amsoil has to offer!

Пікірлер: 29

@irrationalkiwi 7 ай бұрын

editing is getting a lot better!

@timothytoy1191 7 ай бұрын

Those damn o rings get ya every time😂

@ToyShop9665 7 ай бұрын

It was terrible 😂

@awesomeproducts1582 7 ай бұрын

Another video!! I love your vids man, keep up the great work!!

@scottyoung1445 6 ай бұрын

I like the videos. But my gosh. One time , in band camp ..😂

@ToyShop9665 6 ай бұрын

Oh ya? 😂 thanks!

@richiebledsoe1006 7 ай бұрын

i wish more people would use this much rtv lol

@ToyShop9665 6 ай бұрын

I’ve seen some bad ones 😂😂😂

@awesomeproducts1582 5 ай бұрын

When will the next video be out on the moto 4??

@ToyShop9665 5 ай бұрын

Unfortunately not soon enough lol I’m working on a sled right now which hopefully that video will be out soon. And I bought another project for after the moto4 so I’ve been playing with that for a lil bit.

@awesomeproducts1582 5 ай бұрын

@@ToyShop9665 awesome, I’ll be looking forward to your next vids

@Crypto-Milly 4 ай бұрын

what year Moto 4 is this ? I have an 89 yfm 250 Moto 4 Im trying to restore and the previous owner stripped almost ever bolt, screw and fastener on the engine I see you have nice new ones where can I find those ?

@ToyShop9665 4 ай бұрын

This is an 85 and I took out the bolts and measured how long the threads were on each one of them and then got on McMaster Carr website and ordered bolt from them

@redlinersoffroad2768 5 ай бұрын

Was it just the high temp paint that flaked or did the normal paint flake off too?? Id like to know as im interested in buying some

@ToyShop9665 5 ай бұрын

I used the normal stuff on the racks and I don’t remember honestly if it flaked when I put it on or not 😅 everything on the engine was high temp. I also want to investigate and see if it was the primer that screwed me or not. It almost looks like bar aluminum where it flaked and if that’s the case then maybe the paint is good but maybe the primer didn’t adhere to the aluminum? 🤷🏻‍♂️

@joshuaadams2066 6 ай бұрын

hey man just curious where do you source all your parts I'm currently restoring one the first bike i ever worked on and i cant get anything local that's in good shape and everything that the stores can ship in is gonna cost me a arm and a leg. also do you have a tool list for tools everyone should have?

@ToyShop9665 6 ай бұрын

What type of parts do you need? I use partzilla for OEM parts (or a dealer) the bearings in the motor I just brought to Napa and had them get me new ones. Or I use eBay 🤷🏻‍♂️ those are my main sources for parts. And I have a rough tool list in my description (I’m gonna look now to make sure it’s there) of specialty tools I’ve gotten and I really like but as far as hand tools I think harbor freight is a really good option. Tekton has good stuff too! A lot of my stuff is Snapon or Mac from when I worked in a shop but now all my tools come from harbor freight, eBay, or Amazon.

@joshuaadams2066 6 ай бұрын

@@ToyShop9665 more or less looking for everything but Im in Canada will part Zilla ship to everywhere in Canada?

@joshuaadams2066 6 ай бұрын

@@ToyShop9665 the stuff I'm mainly looking for is small specific stuff like the pieces that connects the front drums to the brake cables or like the peice for the choke that goes into the carb but even like the carb rebuild kit I couldn't get and they were gonna charge me 70$ to get it shipped in

@ToyShop9665 6 ай бұрын

@@joshuaadams2066 oh wow 😅 I’m not sure how they handle Canada. I’ve had to call them a few times and they’ve always been great to me. Find their number on their website and call and ask them.

@DRhoneybee 7 ай бұрын

i got a moto 4 i cant get to shift into gear

@ToyShop9665 7 ай бұрын

Which shifter?

@DRhoneybee 7 ай бұрын

like into first gear idk what yr it is exacly its got the shaft seat with both racks 3 bolt back rims @@ToyShop9665

@jasoncoleman476 5 ай бұрын

How the fuck are we supposed to duplicate that.. that video is fucking useless

@ToyShop9665 5 ай бұрын

Which part?

@jasoncoleman476 5 ай бұрын

@@ToyShop9665 I needed to see the shift shaft going in. I have one I just restored and I was riding it to brake it in a little bit.. and there is rod that is right behind the flywheel case.. well that rod came out and now it i only gears down to first gear and it won't go to neutral

@ToyShop9665 5 ай бұрын

@@jasoncoleman476 I still have to put together a “how to rebuild a moto 4 motor” video. Let me look thru my video tonight. Maybe email me and I can send the clip tonight to get you by? Toyshop9665@gmail.com

@jasoncoleman476 5 ай бұрын

@@ToyShop9665 I appreciate it. I was a little bent from dealing with little issues with this buggy after working on it for 6 months here and there. I apologize. I got everything worked out for the most part. The problem I'm having is when I put the cover on over the flywheel. The clutch won't engage. If I take the cover off the clutches will engage. I know that you adjust the clutch there but I have adjusted it the way it's supposed to be and it still doesn't want to work.. I don't know if you have any advice about how to adjust the clutch.

@ToyShop9665 5 ай бұрын

@@jasoncoleman476 only thing I can think of is maybe you have a washer in the wrong spot? Maybe look on www.partzilla.com and find the exploded view of it and make sure everything is in the correct arrangement? Make sure that you didn’t accidentally put a washer inside the case that’s supposed to be on the outside? But you did break the nut loose and hold it and then thread the center stud in until the shifter has only a little play correct? Or if it’s too tight maybe you’ll have to back out the stud until you get free play again. I did film that part I just didn’t put it in this video.