Why don’t you build a miniature motorcycle with this type of motor. With a giroscope ...
@paulendtricht25093 жыл бұрын
Kkk
@acap-50303 жыл бұрын
I'm broke.
@Only_RC3 жыл бұрын
Hey Johnny. Can you Tell me pls the Name of the new Tube Bender or have you a Link for me?
@SOCMMOB4 жыл бұрын
It’s cool that even miniaturized the V4 sound is unmistakable.
@XZasCC4 жыл бұрын
Indeed, brought back memories of my vfr400, only thing missing was distinctive sound of cam chain, always loved the v4 engine
@carlwheezerofsouls32734 жыл бұрын
@@XZasCC i thought those bikes were either super rare or collectible
@XZasCC4 жыл бұрын
@@carlwheezerofsouls3273 some versions are pretty rare, the nc30 and nc24 are, I had nc21 which was turned into track bike, they're super fast for what they are, loved it
@yashshetgaonkar42914 жыл бұрын
Ducati Panigale V4
@vikorbracho4 жыл бұрын
@@yashshetgaonkar4291 This sounds more like Aprilia RSV4
@Z4G.4 жыл бұрын
Holy shit the finished exhaust system sounded so good compared to stock. I never thought such a small engine could produce a great deep rumble. Very cool Johnny, keep it up man!
@LtdJorge4 жыл бұрын
It's because the "muffler" is just a big can haha
@juconkey4204 жыл бұрын
Resonator not muffler
@DEATHWINGS50004 жыл бұрын
@@LtdJorge its actually because the headers are unequal length, the same reason why older subarus have that deep rumble
@danielohara10404 жыл бұрын
@@DEATHWINGS5000 some porches use boxer engines but they sound different do they just use a a different exhaust set up?
@AndrewSosa4 жыл бұрын
@@danielohara1040 porches use equal length headers so they don't sound like grumbly Subarus but the new boxers actually do use unequal length headers so now they sound like Subarus
@Meddes4 жыл бұрын
This is just awesome
@jurgenfischer26353 жыл бұрын
Ich bin Fan von dir meddes
@Alejo91PA3 жыл бұрын
Hell yeah
@makosasimakis1184 жыл бұрын
Instant like ! I look forward to place it in rc
@johncholmes6434 жыл бұрын
@alphant1 You're poor
@Purple-hk7dy4 жыл бұрын
@alphant1 you clearly didnt watch until the end
@juconkey4204 жыл бұрын
Right I was hoping he would put it in a rc. Then at the end he showed it. I'm very excited to see that.
@edi07ish4 жыл бұрын
@alphant1 i bet you skip a few second or minute of this video
@cnvw9744 жыл бұрын
@elephant whatever the name is: They have one for you at Walmart you can buy.... or direct from China! Smh I bet you’re the same group saying you should be paid more for flipping hamburgers too!!! Hahahahaha
@Scott830164 жыл бұрын
I'm not going to lie that is easily one of the coolest things I've ever seen
@MuggyOne713 жыл бұрын
No replies? 🤔
@THEDEVAST4TOR3 жыл бұрын
You eat flys? 🤔
@GioBMX4 жыл бұрын
They weren’t kidding when they said miatas are small cars
@Initial_Gopnik4 жыл бұрын
Yeah true but hey, you know what they say about guys with big trucks 😂
@joshuaallender29864 жыл бұрын
Lol I could second that!
@LexMc06064 жыл бұрын
What about the Prius? If you can drive under an eighteen wheeler and go "That is really dirty," and drive back out... That is just too damn small.
@loganhelland40734 жыл бұрын
This is Stuart Little's quarry dump truck
@anonymgamer34164 жыл бұрын
11:40 for those who only want to hear the sound and want to see the engine running
@LordOfChaos.x4 жыл бұрын
Thank u
@ikhwansem83864 жыл бұрын
Thanks bruh
@Taufik87014 жыл бұрын
Thanks
@stha006work54 жыл бұрын
This exhaust literally sounds like a Ducati
@corporalclegg9143 жыл бұрын
@Joseph Knapp - yup. it’s more about cosmetics, not ingenuity to some (like bratty girls)
@mealex3034 жыл бұрын
This channel should be called.. bloody perfection at everything 😂
@KrazyKotYoutube4 жыл бұрын
Sounds fantastic! True V4 power right there.
@manitoba-op4jx4 жыл бұрын
true V8*0.5 power, you mean.
@emil12064 жыл бұрын
@@manitoba-op4jx i also play my summer car
@Landshark9284 жыл бұрын
Engineering on the highest level: creating your own parts!
@mylofryett91604 жыл бұрын
928 928 how he get parts for it anyway
@norm12334 жыл бұрын
It's crazy how mysterious this guy is, yet how smart and makes amazing things. Most people would want their face to be seen with quality stuff like him.
@grizzc91274 жыл бұрын
This is freaking art!👍
@tristan51774 жыл бұрын
Are you going to continue the supercharged mini rotary engine ?
@johnnyq904 жыл бұрын
Yes, but with a different type of supercharger. It's going to take some time because my knowledge on the subject is prety limited.
@barris12334 жыл бұрын
@@johnnyq90 nice
@patricktsidina59024 жыл бұрын
@@johnnyq90 I'd love to see it turbocharged tho
@AiOinc14 жыл бұрын
@@patricktsidina5902 lol it doesn't make any exhaust pressure, a turbo won't really work that well.
@lutherblissett90704 жыл бұрын
@@johnnyq90 Judging by the design of the first centrifugal supercharger the inducer was too large relative to the exducer, and their weren't enough blades, you would need 10 or 11 blades, not 6. That is my guess, just looking by eye.
@viciouss6.24 жыл бұрын
Up next: Mini Bugatti’s Quad Turbo Charged V16 Engine
Cutest tube bender I've ever seen too. I need that
@Only_RC3 жыл бұрын
You know the Name of the "new Tube Bender"?
@demondefiant63464 жыл бұрын
That little thing is more expensive than my entire car...
@nosatisfaction22784 жыл бұрын
@@mordy2085 an individual being uneducated and uncouth as you are wouldn't understand almost ignorant to the fact if you were looking at a multimillion dollar painting thinking how useless it was to paint.
@Decenity4 жыл бұрын
@@nosatisfaction2278 i cant tell if you're serious or not
@Matter6554 жыл бұрын
@@nosatisfaction2278 a multi million painting is useless
@RexMods4 жыл бұрын
Makes more power than my car on a good day
@StanleyKubick14 жыл бұрын
@@Matter655 all art is useless to the uninspired
@dihler554 жыл бұрын
"Waiting for parts to come." Looks like building an RC car is no different than building an normal car haha.
@DeejayGrafixx4 жыл бұрын
Johhny: Full handmade Exhaust System nobody : pulls out expensive pocket 5 axis cnc
@IlIlIIIIlIlIIlIll4 жыл бұрын
Gfx Grafix this format kinda ruined the joke but it was still funny.
@corporalclegg9143 жыл бұрын
@@IlIlIIIIlIlIIlIll yep. pure original comedic genius
@thallan3 жыл бұрын
Not just expensive, "you're better off buying a car and using that engine instead"-expensive
@dominikb.65764 жыл бұрын
Hey, one little Trick: use alcohol to cool Aluminium while cutting. It makes great surface and no remnants and rust to your tools ;)
@vumba13314 жыл бұрын
Actually kerosene is the best one to use, better for the cutting blades. Learned that from a production engineer!
@mathiastheapprentice4 жыл бұрын
Imagine being his neighbor “GET A MUFFLER FOR THAT THING!!! ITS 3 AM!!”
@adrianolacerda34104 жыл бұрын
Johnny: im going for unequal lenght headers Me: ah, a man of culture i see
@adrianolacerda34104 жыл бұрын
Can we reach 69 likes? 👀
@csb7724 жыл бұрын
#66 liked here!!
@jeeewhyyypheee4 жыл бұрын
one more
@vanos33784 жыл бұрын
i dont fully understand, wouldnt it be better for performance if they were all equally long?
@csb7724 жыл бұрын
@@vanos3378 It does several things. My favorite is the sound. My flows are dumped toward the ground. The rumble is so much better.
@Squids-on-Squid4 жыл бұрын
I just want to thank you for not ruining your videos with music.
@Blackwel453 жыл бұрын
This is so chill and satisfying that i fell asleep like 4 times trying to watch this
@jean-pierrevisser47834 жыл бұрын
Why not make your own little dyno to test all these little engines
@williamhorn42904 жыл бұрын
you need to fuse 2 of those together xD mini v8
@adamr92154 жыл бұрын
william horn Look up the Connely Stinger 609. Mini v8 tut has been in production and for sale for over a decade.
@Hugo-um8nh4 жыл бұрын
@@adamr9215 yes but 10k
@brendan58464 жыл бұрын
W8
@tarui4 жыл бұрын
There is a v800 but no one seems to be selling it
@mastathrash56094 жыл бұрын
Or an enlarged version for a custom bike ❤ I'd bet it'd sound sweeet!
Hell if these aren't some of the best videos on KZfaq... Keep making these, they're fantastic.
@B.D.B.4 жыл бұрын
5:15 IT SPEAKS !!
@RyanTheMalamute4 жыл бұрын
Hey, an actually useful sponsor.
@mickmuzzmkmz16284 жыл бұрын
Ikr? An ad we don't actually mind watching!😉
@KurumaDesigns4 жыл бұрын
My thought too
@chinobandettotv59334 жыл бұрын
Build a classic car model from scratch with this one chief.
@amyasseektruth82464 жыл бұрын
JohnnyQ90 - This is great, but honestly... I trust all your subscribers would agree, you have the skill set/talent to build your OWN engine. We waiting for that project!!!
@jamesandonian78294 жыл бұрын
Finally, we now know what johnny sounds like.. exactly like i imagined him to
@waybous4 жыл бұрын
Brake line bender. Would have never thought about using that.
@KalLanPIDT4 жыл бұрын
Hehe I thought of that when I saw the thumbnail :D
@shawnwaheed2064 жыл бұрын
It’s crazy this this sounds somewhat similar to my 2019 Aprilia RSV4
@DISMODEUS4 жыл бұрын
Would it have enough back pressure to boost? Genuine question.
@rbmwiv4 жыл бұрын
Wow the quad carbs and custom exhaust made that little motor sound a lot better then stock. Keep up these awesome builds.
@helistorm984 жыл бұрын
god that sounds good!!! love the way it looks too! you manage to not only make it functional, but also really nice looking!! can´t wait for the next one
@ibnuharun44673 жыл бұрын
Kelang gawe mesin kaya betik
@Wi_Yeti_Official4 жыл бұрын
I've never second guessed your craftsmanship but when you painted the muffler, I screamed at my phone.
@mickmuzzmkmz16284 жыл бұрын
Yeah, I was thinking the same at first, until I saw the finished product. I must say, it looks very clean & it goes well with the other black parts. Almost factory!
@oluffriesthomsen76804 жыл бұрын
It must be lovely to have the lathe/machining system. I am very jealous 😊
@revro4294 жыл бұрын
dude i dont know if ur shy or what but i hate that the only voice in this was an ad, u got a wealth of microfabricating knowledge to share. i found ur channel yesterday and im hooked i just wish i could listen to what your doing in each ep even text to speech would be awesome but that said even without it i cant stop watching lol love ur projects
@user-gh2yl7bg3n4 жыл бұрын
Your DIY skills are so good. You can design your own mini-engine.
@MrYamyam5554 жыл бұрын
Should definitely turbocharge the engine with a mini turbo, awesome some of the stuff you’re doing 🤘🏻🤘🏻
@jeroberkley88524 жыл бұрын
Ifthis thing were powerful enough to act as a boost for my bicycle I'd get into this hobby, probably..
@hobbypyromane2.054 жыл бұрын
Jero Berkley there are enough engines with enough power, but let’s be honest, it would take to much money. You could buy a used car for the money
@hobbypyromane2.054 жыл бұрын
Ian Kyle Maturan Yes I know, but I think we were talking about the small RC car nitromethane engines.
@camronangell24784 жыл бұрын
That little engine actually sounds pretty good
@KentRoads4 жыл бұрын
Advert very relevant, good work :)
@lurancefn41134 жыл бұрын
Would love to see someone put an engine like this in a RC car or something
@Dawson1454 жыл бұрын
That's his plan actually lol
@garrett5914 жыл бұрын
lurance FN some one already didi its not as cool as this but its a land rover with a inline 4 i believe its a rc crawler
@lurancefn41134 жыл бұрын
Garrett can you link the video
@garrett5914 жыл бұрын
lurance FN yeah ill try and find it give me like 5 mins
@lurancefn41134 жыл бұрын
Garrett aye thanks man
@robm33572 жыл бұрын
That is a great motor. You don’t see many that will idle that slow and that reliable. The throttle is spot on very responsive. You are talented guy with that lathe.
@smalleaglefpv31864 жыл бұрын
Great sound! I just found you on YT and I'm blown away with the stuff you make. So inspiring!
@Dogepugs4 жыл бұрын
That'll fit perfect in my Honda Civic...
@MJT-DA4 жыл бұрын
Imagine having like 20 of these in your car it would sound insane!
@sinister1844 жыл бұрын
Remember that Nissan Leaf commercial that had everything running off tiny gas motors? This guy: seems legit.
@dsruddell4 жыл бұрын
i just watched it for the first time after seeing your comment! thanks!
@MattBrownbill3 жыл бұрын
That exhaust is so well made, looks the part!
@pabloarellano16693 жыл бұрын
A very good miniature engine of the ducati panigale v4 excellent video
@JoshWeaverRC4 жыл бұрын
This engine on one of my airplanes would be the best!
@gruesomely27604 жыл бұрын
It sounds so good great job! Reminds me of my 93 Acura integra 😭
@painmono24784 жыл бұрын
Nice little piece of workmanship
@billniko93104 жыл бұрын
I am still falling love with your KZfaq channel.
@rushnofsky41114 жыл бұрын
Am I the only person that was like... "WTF" when he painted that muffler?
@desthelegend93534 жыл бұрын
Rush Nofsky I want to hear what it sounds like de muffled
@doogierusty4 жыл бұрын
And, didn't he solder that exhaust?
@itchyprince37934 жыл бұрын
And isn’t that technically a resonator?
@georgekaritzis23744 жыл бұрын
Sounds like a true high revving V4...great Work !
@Ilia-Tkachenko2 жыл бұрын
The precision on the lathe is on another level, I am amazed!
@Ilia-Tkachenko2 жыл бұрын
Is he even human
@joshuanicely87224 жыл бұрын
One of the few people I've seen solder correctly.
@gustavodesouza95554 жыл бұрын
You can create a simple 4 speed+rear gearbox fit in and put into a 1:3 scale compact car (around 3 to 4,5 ft long)
@donnebes94214 жыл бұрын
Gustavo De Souza or you can just buy a car. Probably less expensive.
@PlumBoss844 жыл бұрын
When and if the exhaust gets hot enough, wouldn’t the heat pop those soft solder welds?
@lennyplaysgames58714 жыл бұрын
He probably used silver solder so probably not
@phiksit4 жыл бұрын
That looked like regular plumbing solder and flux. Silver solder has a yellow tint to it, is thinner and needs a high temp flux, usually white colored.
@jfirebaugh4 жыл бұрын
I wondered the same thing. There is a solder called Sta-Brite that contains 3% silver and is good up to 600 degrees. As easy to use as plumbing solder, but a bit higher melting temperature.
@TriggeredGnome4 жыл бұрын
I doubt it'll get that hot considering how small the motor is
@turd13824 жыл бұрын
I think that's because the fuel is alcohol/nitro methane combo and burns much cooler. I built a copper muffler for my old nitro rc car and none of the lead solder joints ever melted and i ran it hard for decent amounts of time,sometimes too lean and got it pretty hot and the solder joints still held up.
@ridermak41114 жыл бұрын
Yeah, I agree the muffler needed the black paint, but there was that wonderful moment previous, sporting his top hat and goggles screaming “STEAMPUNK BABY !!”
@jeremy-bx8fu4 жыл бұрын
And with the exhaust the back pressure made it come down to idle alot slower and smother meaning longer life for your top end that's pretty awesome stuff for sure!
@rafaellastracom64114 жыл бұрын
I like your style young Sir.
@ercole14884 жыл бұрын
After the engine is finished, could you benchmark it? (For example max rpm, torque, etc.)
@carterdavis27934 жыл бұрын
Like a Dyno test for horsepower you mean right?
@wrth4 жыл бұрын
Carter Davis sort of. This engine was just built and you don't know much. So a benchmark through stress tests etc would show. Kind of like a company creating a new motor.
@ercole14884 жыл бұрын
@@carterdavis2793 yes.
@alexandrealferan71444 жыл бұрын
@@carterdavis2793 Dinosaurs do not test engines
@discosteve86664 жыл бұрын
Now all that's left to do is to build a suitable micro version of a Ford Taunus to put it in.... excellent work!
@Dashtheboss4 жыл бұрын
Dude awesome! wish somethign like this could be done to make a scale interior, people would go nuts for it in 1/10 or 1/8 scale
@davonmulder84584 жыл бұрын
8:39 here i was thinking it was controlled bij a computer.
@LexusRX-hz5gm4 жыл бұрын
Davon Mulder same!! I thought it was 100% bij when I saw the beginning of the manifold and to my surprise, he’s fuckin hand cranking! The precision is insane!!
@Nickwillfixit4 жыл бұрын
I see there is a spare pulley, maybe a supecharger would really liven it up, fantastic job never fail to amaze me with your skill's.
@Twinfire4 жыл бұрын
Seems like you JohnnyQ90 and Kieth5700 are from the same ilk. Gear heads at heart. Amazing work you do there.
@VinnyGjokaj3 жыл бұрын
This was very impressive! I enjoyed all of it! The black looked amazing too, at first I was like "noooo dont ruin the beautiful copper and brass look" but it turned out to be just as good!
@chiron95364 жыл бұрын
Voice reveal?? 👀
@marioghioneto12754 жыл бұрын
Was thinking about that
@maxdavies99584 жыл бұрын
Nah, i like his current style of video.
@tylergarza86954 жыл бұрын
@@maxdavies9958 I think you missed the point. He did an advertisement voice-over in this video.
@maxdavies99584 жыл бұрын
@@tylergarza8695 I don't think that was him though.
@Michael-kh1nu4 жыл бұрын
If that was him, he sounds hot 🤤
@davidstuart49154 жыл бұрын
amazed the solder joints dont fail very quickly due to exhaust / head temps
@pijussimkevicius61494 жыл бұрын
Was thinking the same lol
@Digital-Dan4 жыл бұрын
Keith Atkinson would be advocating silver solllllder here.
@Tom-Lahaye4 жыл бұрын
@@Digital-Dan At least for the head flanges of the downpipes, exhaust gas temps at the muffler may be low enough for sustained operation with tin solder.
@KalLanPIDT4 жыл бұрын
The fuel he uses burns alot cooler then pumpgas, I dont think he'll have an issue with it.
@dave-8f024 жыл бұрын
I tried this in my younger years on a nitro powered car, making a dual exhaust system out of sweated copper fittings. One rip at full throttle and 3/4 of my solder joints were melted. Brazing was the ticket
@ryryk69774 жыл бұрын
Dude you’d do amazing in the gunsmithing industry
@DanBrianGerona4 жыл бұрын
If I'm just about to go to college and decided to be like this guy. What courses do I need? I have become addicted to watching these kinds of videos about machining stuff especially the ones without background music or talking.
@jaga74844 жыл бұрын
Exhaust headers should be the same length for the equal back pressure
@09ionboy4 жыл бұрын
I'm more worried about the exhaust literally under the oil pan
@someguyontheinternet59444 жыл бұрын
Some Subarus had unequal exhaust length yet they were fine. I agree that the exhaust under the oil pan is more of a concern, but if he has insulation, he might be fine. I think it'd be better if he routed the exhaust like a regular car, but he probably made it like that for a reason. Maybe when he puts it in the RC the exhaust will be changed
@PaulSter4 жыл бұрын
I think he knows that. He said unequal length for a more rumbly sound. Geez you guys. It's just a micro engine for fun.
@benperkins29294 жыл бұрын
Love the crank case exhaust E-Vac addition. Nice.
@paul66322 жыл бұрын
i think this guy is agenious with these skills
@CaseyFinSF4 жыл бұрын
Yes, it sounded more throaty with the new exhaust. Very nice touch👍🏼
@derekv2754 жыл бұрын
I'd love have a fraction of this man's talent
@skysurferuk4 жыл бұрын
I'd personally love his 5 axis router... :)
@cnvw9744 жыл бұрын
Never understood why someone hasn’t came out with a mini V8 engine this size that is sold like a model, where you have to assemble it like a model. AND BE AFFORDABLE!!! Or a weed trimmer size V8 would be better!
@michaelesposito26294 жыл бұрын
Lol. And be affordable. Ok
@floopynoops13364 жыл бұрын
Based on the price of this 4 cylinder you would be better off buying a real v8 that was rebuilt this thing is 1400 dollars the v8 9ne id have to imagine would be around 3 to 4 thousand you could go on vacation with that money or build a 4 engine awd go kart you could buy a high end electric bike or a down payment on a car yea idk its cool but holy fuck is it expensive if you got the money to blow for that hobby do it but I could think of a million other things to spend it on lol I'd probly buy me and my brothers fat tire bikes and install 4 strokes on them thats just me
@pauls57454 жыл бұрын
@@floopynoops1336 I think it was Mike Conley? used to make those tiny v8's and optional supercharger but 4k wouldn't even touch it. they started at 10 or 12k iirc
@nesterperiwinkle4 жыл бұрын
Your mini engine is probably the coolest thing I have seen in a long time! Can’t wait to see the finished project.
@Unc_Talks4 жыл бұрын
That car is gonna be insane!
@MrAgentCodySpanks4 жыл бұрын
Why does this sound like an aprilia 😂
@MrAgentCodySpanks4 жыл бұрын
@Adriel R thank you
@albertus20934 жыл бұрын
Like a Mini V8 in Dodge Charger
@AndyPorter793 жыл бұрын
Just put this engine in my Dodge Neon. Faster than stock. Ye ye
@corporalclegg9143 жыл бұрын
just add a gigantic rear spoiler for instant racing performance and guaranteed super intense & aggressive female attention
@jimmybullock28904 жыл бұрын
This would be great for a 1/14 scale rc truck
@reesesman88214 жыл бұрын
I love how it sounds like an RX7 and a Subaru boxer had a baby
@listenhereyoulittleshit3894 жыл бұрын
Can you extend the exhaust system that it sticks out of the rear of the car
@ryantucker55544 жыл бұрын
Before: sounds like a weed whacker After: sounds like a leaf blower
@RacinUltimatum4 жыл бұрын
Before: sounds like a new ducati After: sounds like an old ducati
@raiderrichard72914 жыл бұрын
Sounds better than a lot of vehicles you hear on the road
@davidkoh0074 жыл бұрын
Downsizing taken to a whole new level
@RenatosilvaMinis-Games4 жыл бұрын
muito top
@halfbenjaminmarshall71344 жыл бұрын
Wish I had the talent to build something like this that's incredible👍
@davesnothereman6994 жыл бұрын
I cannot wait to see it in the RC
@girardi88344 жыл бұрын
Not to sound like another commenter but dude watching people do such talented machining is so beautiful to me good luck in all that you do!
@DadeWheless4 жыл бұрын
Aren't those solder joints going to melt when you run the engine? Or do nitro engines have cooler exhaust? Love the build!
@xiu-quiahuitlleal34274 жыл бұрын
When you gunna build the rest of the car?
@haigaes70674 жыл бұрын
Lofi / sleepy music / study music Check this channel kzfaq.info/love/rXUXXhDKT33CB29uWGf93A
@aesopwolf31264 жыл бұрын
@@haigaes7067 wtf Mane?
@janesammons53574 жыл бұрын
Funny v4s only go in Ducati motorcycles
@myis300turbo4 жыл бұрын
Seeing doing crazy things with metal. Then watching AVE, doing his things today with CNC. Lol, if he took some lessons from you her would be a master. Not saying anything bad about AVE, love that guy, pretty much the only channel I watch. So much respect for him.