Full Install - Xtrusion Overland XTR-3 with AXS on our Jeep Gladiator

  Рет қаралды 2,460

Trailside Talks

Trailside Talks

Күн бұрын

In this video we describe the full install of the Xtrusion Overland XTR-3 Rack with AXS. This rack is fitted for our Jeep Gladiator in a height of 17 inches. The reason we chose 17 inches is for a planned root top tent. We just don't want it to stick out too far above the roof line. This video might be a bit over-detailed.
You can find more videos about Xtrusion Overland at their channel at @XtrusionOverland
00:00 - Intro
01:32 - Column build
04:32 - Column build pitfall
05:38 - Corner bracket
06:22 - Thread locker
08:36 - Main Cross Bars
10:38 - Rough layout
12:20 - Initial assembly
14:47 - installing side cross members
16:00 - Closing the gaps
17:30 - Torque specs
18:24 - AXS Pre-Setup
18:59 - AXS build
27:15 - AXS install and adjustments
50:09 - Molle Plates install
58:05 - Lifting the rack on the truck bed
58:45 - Final rack mounting and adjustments
59:33 - Secure the rack to the truck bed

Пікірлер: 8
@Sentry1835
@Sentry1835 9 ай бұрын
Great video very informative 👏
@TrailsideTalks
@TrailsideTalks 9 ай бұрын
Thank you! I admit, it is a bit long, but I tried to capture every piece of information that will make the install easier for the next person.
@earlhamil731
@earlhamil731 Ай бұрын
Do the instructions actually require bench assembly complete? Seems more straightforward to get it on the ba Ed asap
@TrailsideTalks
@TrailsideTalks Ай бұрын
I chose table/bench assembly since it seem easier to me until all parts are fully lined up and torqued down. Up to that point everything is just a bit wobbly. The fine tuning of the AXS and panels is best done when everything is on the bed.
@vinboughton4751
@vinboughton4751 2 ай бұрын
They don't have install video of there own?
@TrailsideTalks
@TrailsideTalks 2 ай бұрын
They have one. But it doesn't cover exactly which parts go where and how to install the hinges.
@enriquevietom5005
@enriquevietom5005 8 ай бұрын
Hi, I would like to know the dimensions of the main pipe, are 2 inches or 2.5 ?
@TrailsideTalks
@TrailsideTalks 8 ай бұрын
All bars/cross-members are 3" x 1.5" x the length needed for application.
Xtrusion Bed Rack - 6 Month Review + Install
15:39
Baker Overland
Рет қаралды 1,8 М.
The Ultimate Test for our Bed Rack System. Xtrusion Overland Tackles Moab
20:35
Неприятная Встреча На Мосту - Полярная звезда #shorts
00:59
Полярная звезда - Kuzey Yıldızı
Рет қаралды 7 МЛН
Мы никогда не были так напуганы!
00:15
Аришнев
Рет қаралды 4,8 МЛН
DO YOU HAVE FRIENDS LIKE THIS?
00:17
dednahype
Рет қаралды 46 МЛН
THEY WANTED TO TAKE ALL HIS GOODIES 🍫🥤🍟😂
00:17
OKUNJATA
Рет қаралды 12 МЛН
Xtrusion Overland - How to Cut and Tap your Xtrusion Bars
2:46
Xtrusion Overland
Рет қаралды 8 М.
Truck Cap Camper Build (Part 2) MASSIVE 7ft SLIDE-OUT!
17:55
Maine Trout Whisperer
Рет қаралды 195 М.
First Roof Top Tent! - Setup and Unboxing - YoungHunter Roof Top Tent
17:41
Overland Expo West 2024
38:00
Trailside Talks
Рет қаралды 3,4 М.
My 21 Jeep Gladiator Vs My 21 Toyota Tacoma. Cold Hard Facts.
21:10
Dirt Lifestyle
Рет қаралды 281 М.
The Ultimate Jeep Gladiator Build | Tiny Builds
27:24
Tiny Rig Co
Рет қаралды 90 М.
Xtrusion Overland Bedrack Install | Toyota Tacoma
18:09
TheDarkYota
Рет қаралды 9 М.
Jeep Headliner Replacement
23:19
OutJeeping
Рет қаралды 177 М.
INSANE service truck set up!
1:01:24
Hamiltonville Farm
Рет қаралды 44 М.
Gladiator Build Update - New Rack and Tent
22:06
Ozark Overland Adventures
Рет қаралды 22 М.
Тюнинг детейлинг МТЗ турбо
0:28
traktorist_161_
Рет қаралды 1,3 МЛН
Снова сельский непонятный движ 😁 #Россия вперед🔥
0:12
Светлана Озаровская
Рет қаралды 1,7 МЛН
МОЯ ЛУЧШАЯ ПОКУПКА! Это круче чем Роллс Ройс
37:56
Жекич Дубровский
Рет қаралды 2,1 МЛН