Full Motorcycle Brake Rebuild - Master Cylinder and Caliper!

No video

Full Motorcycle Brake Rebuild - Master Cylinder and Caliper!

Рет қаралды 68,688

Күн бұрын

Time to rebuild the front brakes of my Suzuki Drz400sm. This is basically the same job on any motorcycle caliper, but make sure to do your research on your bike!
Huge thanks to www.wemoto.com for the parts to do this job and make this video for you guys and girls.
---------------CHANNEL SUPPORT----------------
HUGE THANKS to those who help support this channel
without it I wouldn't be able to do this.
Patreon: / spicy110
Videos 3 days early for $1 a month.
paypal: goo.gl/A5v0yU
Direct support.
Stickers: goo.gl/XCHunp
T-SHIRTS and HOODIES
goo.gl/4m7Hw6
Fabric "spicy110" and "BEEF!" Keytags: goo.gl/nEAAqj
----SPICY110 METAL WORKS (Handmade metal art)---
Clock Commissions: • Spicy110 Metalworks, T...
Etsy Store: www.etsy.com/u...
Facebook: / spicy110metalworks
Instagram: / spicy110metalworks
-------------Po Box----------------
Please send your old sprockets and discs here, for the Metal Works
I would really appreciate it. They must be sent via royal mail not parcelforce ect.
Spicy110
PO BOX 170
Hayling Island
PO11 1RG
----------------SOCIAL MEDIA---------------
Twitch: / spicy110
Instagram: goo.gl/7Cimfq
Twitter: goo.gl/bKQNDc
Facebook: goo.gl/9K0Krx
--------------DISCOUNT CODES----------------
RHOK Jeans, MRT Jeans, gloves and armoured hoodies.
In the UK with a 5% discount with code EXTRA5-SPICY110 at www.theriderte...
Haslemere Motorcycles
goo.gl/1BKxSM Just say "Spicy110" in store and you will receive a discount card for parts and servicing!
(I bought both my bikes from them!)
-----------------BIKES-------------------
Suzuki DRZ400SM 2008 AKA "Derek"
440 cc Big bore kit.
FMF Powerbomb header.
Lextek Carbon exhaust.
LexTek indicators.
----------------------------------------
Yamaha XJ6 S Diversion 2010 AKA "DIVI"
LexTek adjustable levers.
LexTek indecators.
R&G Tail Tidy.
Skidmarx UK Screen and Hugger.
Black Widow Exhaust.

Пікірлер: 102

@MotoTingle 5 жыл бұрын

Hi Mr Spicy. Good Instructional video. For a non-full time mechanic you have done a blinding job. It was fun, educational and took all of the "mystery" out of the job. All I'd ask if that if any of you attempt this yourself and encounter issues, stop and consult/refer/hand-over to a professional, brakes are not something you want as defective items at any time while riding a motorcycle. - Great video.

@mirrasoriano9517 Жыл бұрын

😊😊😊😅😊😊😊😊😊😊😊 12:27 😊😅😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

@oxide_fx 5 жыл бұрын

Your timing is impeccable. I was needing to tackle this job today and was just about to look up on how to do it!

@Nick-vx3er 5 жыл бұрын

This is an amazing tutorial for this job. No silly jumpcuts creating doubt, very detailed easy to comprehend explanations at every step. Although I learnt this job a long time ago I still watched it as it is nice to watch a perfectly executed maintenance video. Thank you Spicy.

@spicy110 5 жыл бұрын

Thank you for that very kind comment! 🙂

@leathleyg5995 3 жыл бұрын

Great video, thanks. One very minor point that hasn't been mentioned. I wouldn't rattle the hose when refilling and bleeding. Air rises and fluid drops. It could make any air in the hose go back up the system. Very helpful though.

@spicy110 3 жыл бұрын

Yes that's fine as it comes out the top if it's a strait run.

@AudreysKitchen 2 жыл бұрын

Awesome helpful video, thank you! Just getting ready to tackle this project on my 93 Honda Helix. Really looking forward to having some good functioning brakes again.

@forevercomputing 5 жыл бұрын

I recommend putting the grease inside the rubber instead of the metal pins. When you put them in, the rubber wipes a lot of it off. Too much fluid? Your positioning may alter that. I'd go with higher than maximum, set height, the drain excess. (bleed)

@roblydiate5453 3 жыл бұрын

great little tutorial for the home mechanic, the only thing I would add is I probably wouldn't grease the caliper bolts, grease plus vibration during use could cause the bolts to vibrate loose. I'd always use loctite on them instead. But great video!

@christophermyers242 4 жыл бұрын

got two sets brakes to do - honda vfr 400cc nc 21 - new seals Yamaha dtr125r master cylinder both brakes seals - very helpful blog

@mightybeanstick9872 5 жыл бұрын

The thinner first seal is the dust seal, the thicker second seal is the pressure seal. I refurbed my front calipers last year - new pistons, seals etc. - and tried filming it. The footage turned out to be a right dog's breakfast, missed quite a bit of it as the phone I was using either ran out of memory or battery, or both. I second the suggestion of loosening bolts etc. while the caliper(s) are still on the bike. In my case, the calipers are 4 pot so split into 2 halves. If I had taken them off the bike before loosening the joining bolts I would not have been able to undo them. Obviously I could put them back on the forks, but it saves time if you plan ahead and think about how things are going to happen. I tried to get my pistons out with piston pliers. What a pain that was. Ended up getting a piston extractor kit from Amazon. Best £40 I ever spent. Probably can be used on bearings too...

@davidbesant 5 жыл бұрын

With the caliper bolts, I prefer to use thread-lock rather than grease (as the manufacturers do). Never had trouble getting them out again, and no worries about the bolts vibrating loose (you really don't want that!).

@spicy110 5 жыл бұрын

I did consider it and have done it in the past myself but i did research to see what the facts of the matter are (you can see why from the comments haha) and altho its done by many a properly torqued bolt will not come out or vibrate lose. If you really don't want them to come out wire locking them is the best option.

@meredithserdechka487 6 ай бұрын

Outstanding! Cracking great! Thank you and Cheers!

@markf4018 Ай бұрын

Just bought a caliper rebuild kit from wemoto to do my aging zzr.

@spicy110 Ай бұрын

Best of luck on the job!

@markf4018 26 күн бұрын

@@spicy110all went well. Did the master cylinder- still no joy. Checked out the calipers- which had been “serviced” by a garage. They both had piston seals bursting out of the caliper - and 3 out of 8 pistons seized. 🤦‍♂️ All cleaned and corrosion dremeled (carefully) away. Didn’t even lose a finger when I used my compressor to push the pistons out. I did get some fluid on my screen - but hey - this is bike #3 so - meh - whatever. All rebuilt well and got brake pressure. On the test ride though - the bike decided that it wanted to be triple and not an inline 4. 🤦‍♂️ Still, I have 2 other bikes to ride and I do quite enjoy tinkering with the bikes in the garage. Thx again for your post - gave me confidence to attempt this.

@johna6968 5 жыл бұрын

When something is extra tight like that pad pin, try to tighten it first before undoing.

@paulbudford 5 жыл бұрын

Funny enough I serviced my brakes last week. And one of the grub screws was missing too. Only £1.70 plus postage from wemoto.

@Zeta368peep 5 жыл бұрын

I had a bike in my garage with no breaks for awhile.. This video has gotten me to to do em xD

@stuarts7188 2 жыл бұрын

Thank you, friend.

@davegeorgeu380 Ай бұрын

I have a 2009 f650GS BMW . Struggling to get the 4 seals for the front Bremba brakes. I am sure Honda and others have the same piston seal sizes are you able to tell me if so. I am in Cape Town South Africa. Let me know thanks

@ryanstephens6151 5 жыл бұрын

i am going to be doing this soon to my cbf600. great vid man!

@bwye 5 жыл бұрын

Fantastic, informative tutorial Sir.. 😎

@alexharris8500 10 ай бұрын

Excellent vedio buddy

@Lightspeeders Жыл бұрын

i just a complete revesion of the master cylinder of my honda cr but it is still leaking on the end of the lever wtf , everything is new , someone have tips?

@spicy110 Жыл бұрын

If you have replaced the piston and seals in the master cylinder and it's leaking and it's defo the right part. I would say the seals are not in the right way or you could even have a crack in the housing. Best get it off the bars, clean it up and find where that leak is coming from.

@richardculbertson8027 5 жыл бұрын

Delboys garage uses wemoto as well and has just rebuilt the rear caliper from his new project hyabusa

@curtiscurt 5 жыл бұрын

Delballs is a bit of a cowboy

@MotoTingle 5 жыл бұрын

@@curtiscurt Ha ha! Nice one.

@MVW54 4 жыл бұрын

Important to mention… When the piston is in the rest position, the brake fluid will be balanced via The compensation hole. This compensation hole is very small, clean this compensation hole with a very thin wire of copper, if it would clog… you are guaranteed a dragging caliper, this has already happened to me twice!!! with the Honda CBX 1000. Stay Safe.

@WILLY52368 3 жыл бұрын

What's a compensation hole, where is it exactly?

@MVW54 3 жыл бұрын

@@WILLY52368 … here is an good explication… kzfaq.info/get/bejne/jtFiraqnsMzWmJc.html greetz! Marco

@Del197 Жыл бұрын

That replacement piston on the master cylinder looked plastic ! Was the original plastic or are they both metal .? Difficult to see.!

@spicy110 Жыл бұрын

From memory, it was a very light cast metal.

@KewinKrawczyk 4 жыл бұрын

Thank you for this video! That explains a lot

@bibihamidan8901 2 жыл бұрын

The 'piston' that sits in the master cylinder is getting stuck when i pull the lever and slowly getting push back out, so im am thinking its my spring? Anyone have any ideas? Will be much appreciated.

@raydubbstep4424 Жыл бұрын

Gave up and bought a whole new one. Impossible to put back in c clip without riding out the housing.

@spicy110 Жыл бұрын

If I remeber right I modified my circlip pliers to fit down in there, old video.

@colinbourne8345 5 жыл бұрын

If you count to 5 after each pull of the lever as apposed to pulsing the brake will bleed much quicker

@spicy110 5 жыл бұрын

I had empty lines at that point i didn't want to bleed out the air i wanted to get most of it out the top. There is a small clear inner cover over the MS piston with a very small hole in it, my quick pulsing and tapping to start with dislodged the bubble allowing the line to fill without too much air to need to bleed out after. You will note on the last bleeds i do its a totally different approach more like you mentioned for actual bleeding air out the bottom.

@maycrotch8576 5 жыл бұрын

Awesome vid Spicy 👍

@ELI.K55069 6 ай бұрын

My calipers are seized is this the process to repair it? Sorry if it’s a stupid question I don’t have knowledge on this stuff still new.

@spicy110 6 ай бұрын

Yes cleaning it and replacing the seals and or pots would fix that issue most likely.

@ELI.K55069 6 ай бұрын

@@spicy110 ok thank you.

@WorldLogic 5 жыл бұрын

Great video dude

@iamkirankumarkv 2 жыл бұрын

recently i fell from bike to right side. after that break lever doesn't operate properly. often when i apply, lever comes very close to throttle grip. is it because the spring and master cylinder is faulty/broken?

@spicy110 2 жыл бұрын

Yes or not enough brake fluid in the line or it has air in it. I can't say what one but it will be one of them.

@iamkirankumarkv 2 жыл бұрын

@@spicy110 okay thank you

@funkypotamus 3 жыл бұрын

Is that new master cylinder piston made of plastic? 🙁

@SteviRides 5 жыл бұрын

wow they even sell lexmoto parts too

@chrisliddle2236 5 жыл бұрын

Hi watched thanks good intro I have a problem just fitted new seals and dust seals because of binding calipers there still the same now master cylinder could be that does it return fluid and could be this part brake is very keen on the lever

@spicy110 5 жыл бұрын

Are the sliders on the caliper free moving?

@chrisliddle2236 5 жыл бұрын

Yes new seals new pads

@bandit12-- 5 жыл бұрын

Are the pressure seals non directional on these calipers? I know other ones I've done have a lip and it can be hard to tell without feeling it once its in

@spicy110 5 жыл бұрын

I check my extra ones and no seems not in this case thankfully. Nor did i see it mentioned in any of the walk thoughts i watched or read.

@bandit12-- 5 жыл бұрын

@@spicy110 Fair enough. Brembo stopped supplying seals at one point because someone fitted the seal the wrong way round and fluid came gushing out. The guy sued brembo because they didn't specifically mention this. Suzuki bandit seals have lipped edges

@dougcrabbe6893 3 жыл бұрын

An if you know what hydrologic rubber type and sizes your better off buying them from a hydrologic shop eg a complete brake rebuild only cost me $25AUS and a chainsaw primer fits and locks in great for the dust protection rubber, because I am so sick of the second one says motorbike they try changing you 3 X the price

@castrejo67 5 жыл бұрын

very good educational video :) well done

@richardculbertson8027 5 жыл бұрын

I think trk is the in house brand for we Moto and from what I've heard they are OEM or as good as OEM

@spicy110 5 жыл бұрын

Well they work great so I'm happy haha

@sebastianomandala7936 2 жыл бұрын

why would you need the cap? I always thought it is sort of useless?

@spicy110 2 жыл бұрын

sorry what cap?

@sebastianomandala7936 2 жыл бұрын

@@spicy110 sorry I was typing while watching. The cap that sits in front of the pin that you don't have.

@Day12My 2 жыл бұрын

I pulled the circlip and the piston wont come out? rusted up. Am I fucked and will I have to buy a new Master Cylinder?

@spicy110 2 жыл бұрын

If there is rust in there, yer that's going to need a new master cylinder. Don't risk anything with brakes.

@peymanalizadeh3509 2 жыл бұрын

❤️

@samwild58 5 жыл бұрын

how else could you get pistons out without an airline?

@spicy110 5 жыл бұрын

You can get a caliper piston extraction tool.

@koudacyen 5 жыл бұрын

Got a question for you spicy Front right indecator not working back right does but wont blink

@125sm3 5 жыл бұрын

Checked your bulb ?

@abbottplays1658 5 жыл бұрын

Potential loose connection on the front indicator ? had that on my bike had to clean the connections

@WILLY52368 3 жыл бұрын

How long does it take for it to build pressure again?

@spicy110 3 жыл бұрын

depends on the bike and just how it goes. can take quite a while.

@WILLY52368 3 жыл бұрын

@@spicy110 ok, I cracked the bango so I could service the piston. Put everything back together rear pedal no resistance. Is that normal? So I should continue bleeding and not give up?

@RoadRashHD 5 жыл бұрын

You should have washed out the reservoir with hot water first

@MotoTingle 5 жыл бұрын

Disagree: Use Brake cleaner. Water and brake fluid should never have the pleasure of accidentally meeting.

@SW400SM 5 жыл бұрын

....I've had enough!!! It is DEE ARR ZED! If you want the OEM cap for the front caliper I may send it to you if..... YOU STOP SAYING DEE ARR ZEE!

@spicy110 5 жыл бұрын

Haha only if you call Jay zee, Jay Zed from now on! 😁

@maycrotch8576 5 жыл бұрын

Flange is my most favourite word😂

@spicy110 5 жыл бұрын

Flanges and gussets always make me laugh 🙂

@maycrotch8576 5 жыл бұрын

@@spicy110 MOIST!!!!! 😂😂😂

@easternmenace 5 жыл бұрын

@@maycrotch8576 One of the things we do at my current job is pulling flanges lol. Not as exciting as it sounds tbh

@maycrotch8576 5 жыл бұрын

@@easternmenace are you sure? It does sound very exciting 😂

@easternmenace 5 жыл бұрын

@@maycrotch8576 No you take a rubber part and pull it through a metal part with pliers, done it on my own for 8h once, nearly went insane. Now if there's someone you can chat to, it's the easiest job ever lol. Joys of minimum wage factory jobs, thankfully it's something I do rarely

@maycrotch8576 5 жыл бұрын

I got 22mins in, then I get interrupted 😣

@jbcXR 5 жыл бұрын

"Simples" ......👍

@Forie 5 жыл бұрын

Does this same routine work with the drum brakes on my xr200?

@spicy110 5 жыл бұрын

The survey says....no.

@Forie 5 жыл бұрын

spicy110 ok I’ll stop what I’m doing then and ring a vintage bike dealer. Thank you for your hospitality 🙏

@avocato1135 5 жыл бұрын

@@Forie Drum breaks aren't much more difficult, they can be a pain, but the process isn't anymore difficult if you take it slow, just do your research as Spicy says. :)

@aryanprivilege9651 3 жыл бұрын

I got Fred Flintstone stop with boots, no breaks can you tell me how to resole feet? Nah wired screws on reservoir Japanese 3 letter machine screws? 2006 ZG 1000 4 cyl concours odd? Funny fit?

@aryanprivilege9651 3 жыл бұрын

Plastic pistons? Yikes

@aryanprivilege9651 3 жыл бұрын

Look how tiny it is, looks like something for a toy or moped, mines size of Japanese car only a 4 cylinder just liter engine. Wonder if has Japanese screw heads pain in ass name with letters forgot!

@toliver.99 5 жыл бұрын

wish i had all those tools :(

@spicy110 5 жыл бұрын

Do what i did, buy when things are on offer and slowly over time get the bits you need.

@toliver.99 5 жыл бұрын

On lidl specials at the minute. Surprisingly effective. Luckily my mum's fella owns a garage so if I need to borrow anything major I usually can. Just takes five hours to find!