Full Paint and Body in 12 Min - Ford F250 Rust Repair and Paint

  Рет қаралды 5,141

Rusted Rides

Rusted Rides

5 ай бұрын

Thank you for watching! We hope you like the video and consider subscribing!
In this video we take a Ford F250 Super Duty that has seen too many Canadian Winters and we give it a fresh lease on life. It is definitely not a rull restoration, we just wanted to make it live a little longer and look good while doing it. We give this thing a cosmetic make over and completely transform the look of this truck. A lot had to be replaced, some fenders, it has a new truck box, and some rocker panel repair. Once the rust and rot was cut out the entire truck was sanded down. We sprayed primer on any exposed metal and anything that wasn't the right paint color. To get the two tone paint scheme we masked off the upper part of the truck so that we only got gold paint on the bottom of the truck, then we did the reverse of that masking and painted red / maroon on the top half of the truck. After we had both colors of paint on the vehicle we sprayed clear coat over the entire truck. The finished product looked great and even better when reassembled!
We have another project coming out next week so keep an eye out for that!
car, cars, truck, trucks, hot rod, muscle car, fix, fixing, rebuild, restoration, restore, paint, painting, paint job, dodge, tim deegan, cam pollard, rust, rusted, rides, mechanic, diy, before and after, transformation, before, after, fender, quarter panel, door, mirror, decal, Ford, F250, Raptor Liner, Bed Liner, red, gold, two tone, start to finish, rusty,

Пікірлер: 57
@dancinglora
@dancinglora 5 ай бұрын
Ok I’m with you , not a huge Ford guy but I will say you guys are killing it!… sweet looking work truck now. . The little touch with chrome handles … well done 🙌🏻. Cool video
@RustedRides
@RustedRides 5 ай бұрын
Thank you! And ya those handles really were a nice touch!
@goodtimefishing1005
@goodtimefishing1005 4 ай бұрын
Really good work. It looks 100 percent better
@RustedRides
@RustedRides 4 ай бұрын
Haha ya it was in desperate need
@troysgarage
@troysgarage 4 ай бұрын
My brother is a mechanic and charges double his shop rate for labor if someone brings in a Ford. In his words "They circled the problem right on the front (Ford Emblem LOL)". That said, you guys did good work, I would have chosen a different model to begin with, but hey! You probably got a steal of a deal on it!
@RustedRides
@RustedRides 3 ай бұрын
Haha thats great! It's crazy manufacturers just seem to make it hard to work on stuff sometimes. Thanks for watching/commenting!
@FiveBoroNative
@FiveBoroNative 3 ай бұрын
Holy smokes...! I just semi-retired my 2012 F-250, and I was worried about some rust in spots, but it is nothing at all like this. After seeing this video and other videos here on KZfaq, I guess I don't have much rust at all. Wow...!
@RustedRides
@RustedRides 3 ай бұрын
Oh all we do is deal with rust haha. Some of these vehicles should be put out to pasture, but sometimes we can give a few extra seasons
@samHagar-nc3ni
@samHagar-nc3ni Ай бұрын
I smoke too much weed to be this productive at home
@DJG-Engineering
@DJG-Engineering 5 ай бұрын
It has been awesome following you guys so far. There is just something a little different about your channel compared to the other KZfaqrs. Keep it going guys.!
@RustedRides
@RustedRides 5 ай бұрын
Thank you! That is super nice of you to say! Happy you like the content, we are trying to stay consistent and are trying to keep interesting projects coming. Thank you again for that comment!
@Craig_Ewan
@Craig_Ewan 5 ай бұрын
Sounds like FORD is equivalent to BOEING when it comes to 'easily accessible for maintenance' 🤣 Love the paintjob, nice lines!
@RustedRides
@RustedRides 5 ай бұрын
Hahaha is that their reputation? A lot of cars I like aren't knows for ease of repair
@walkerandrews8892
@walkerandrews8892 4 ай бұрын
Hey just discovered your channel. I have been DIYing body work for about 3 years now. Some tips and tricks I have learned. Before you paint broom out your area and spray water on the floor it helps with dust. Also a cover all paint suit from local hardware store helps out, maybe $16. Just helps keep dust down.
@RustedRides
@RustedRides 4 ай бұрын
Ya we've wet the floor before. Woukd be nice to have a few paint suits. I've also seen some KZfaqrs using positive pressure full face masks!! Must be nice!
@katie1822
@katie1822 5 ай бұрын
great Vide!!!!
@RustedRides
@RustedRides 5 ай бұрын
Thanks! Next week will be a real "vibe"... Thats a hint for next week's video haha
@JTMoney333
@JTMoney333 5 ай бұрын
It still looks cold up there! I myself wouldn't have wasted that much time on a Ford as well. Regardless, it turned out MUCH better in the end and will make for a solid work truck. Keep hustling and doing quality work. In no time, you guys will be upgrading and expanding. Be well!!
@RustedRides
@RustedRides 5 ай бұрын
Yep still cold. We had a warm spell, but back to cold again. It would make a great work truck, runs well, solid where it needs to be, and at least now it looks good. Thank you very much for the encouragement, it can be a lot of work to turn these videos around every week haha. But we are enjoying it and glad others are as well!
@markadymark1844
@markadymark1844 2 ай бұрын
Nice!
@RustedRides
@RustedRides 2 ай бұрын
Thank you! And thank you for always commenting!
@nickkiosk5513
@nickkiosk5513 5 ай бұрын
awesome video the editing is top notch i can tell yall are putting alot of effort into these, what kind of welder are you using when you cut out the rust on the door and re tack a new piece?
@RustedRides
@RustedRides 5 ай бұрын
Hey, thank you! Yes we are putting in a lot of work both on the cars and on the videos. Glad you recognize that, really appreciate the comment. The welder is a Lincoln 180 mig welder
@Usonian7
@Usonian7 4 ай бұрын
I'd love to see an old sprinter van
@RustedRides
@RustedRides 4 ай бұрын
We might do an old boxy dodge van soon
@briizcustoms9543
@briizcustoms9543 4 ай бұрын
After tack welding (is that what it’s called?) what’s the next step to get the pieces welded in to stay together? Also, do rocker panels have anything to do with structural integrity of the frame?
@janettavculek9308
@janettavculek9308 2 ай бұрын
Nice, but it's still a rust bucket underneath, are you going to repair that too? Elsewise it will just cave in on you.
@MidnightPolaris800
@MidnightPolaris800 4 ай бұрын
Looks great but do you know you can get a plastic duck bill looking piece for the gallon paint cans that lets it not run like that
@RustedRides
@RustedRides 4 ай бұрын
You know what, definitely have seen those, and always forget to go find any. Gotta get some for sure!
@chadb9661
@chadb9661 16 күн бұрын
Where in Canada are you guys!? Takenon paying jobs?
@mcmxc3794
@mcmxc3794 4 ай бұрын
Where in Ontario are you guys? Interested in doing any subscriber cars? I got a few older 4x4 Toyotas, that could probably garner some attention. If not, where is the best store or website in Ontario to buy supplies and paint?
@RustedRides
@RustedRides 4 ай бұрын
Hey we are in Uxbridge, about an hour north east of Toronto. Where are you? Interested to hear what toyotas you have!
@LeahDaniels
@LeahDaniels 5 ай бұрын
Wow! What a difference! How many days did that take?
@RustedRides
@RustedRides 5 ай бұрын
A few haha. I think it was 4 or 5 days. But ya, very different rolling out of the shop than the way it rolled in
@BB-dg1sc
@BB-dg1sc 3 ай бұрын
What did the underside & frame look like? I’d say frame rot is what puts vehicles out to pasture
@RustedRides
@RustedRides 3 ай бұрын
It was ok. A lot of surface rust, but will pass inspection. We coated it with the no drip oil undercoat to help keep the rust from getting worse
@BB-dg1sc
@BB-dg1sc 3 ай бұрын
@@RustedRides i hope ur channel gets more views. Reminds me of what original content used to look like. Great job
@LR6092
@LR6092 Ай бұрын
...im restoring my f350. And the anount of rust inside those door jams im sure is horrendous. The cab corners and rockers are probably falling off
@RustedRides
@RustedRides Ай бұрын
We just started on another F250, not as bad this time. Lots of no drip oil undercoat will be applied after finished
@LR6092
@LR6092 Ай бұрын
@RustedRides fluid film works well I hear. I'll be spraying that inside the rockers and the bottom inner of the doors. I also got some eastwood ceramic paint for the frame
@tsparks4133
@tsparks4133 4 ай бұрын
How much for the F-250?
@R-Mc
@R-Mc 5 ай бұрын
You guys can do my 1998 Chevy Blazer
@RustedRides
@RustedRides 5 ай бұрын
I used to drive a 98 chevy blazer! Loved it! I had a very efficient way of packing my drum set in that thing!
@MidnightPolaris800
@MidnightPolaris800 4 ай бұрын
An ls swapped dodge ram...what in the hell...the hemi is 2x what an ls would ever be...do a in depth video on that truck, im curious about itm i see what looks to be a 4th gen front bumper and box
@RustedRides
@RustedRides 4 ай бұрын
Haha I know it sounds weird, but it's cool. Make a lot of people mad too. But we could do an in depth on that truck at some point. We have a yellow hemi on the channel too.
@thejewbacabra4926
@thejewbacabra4926 5 ай бұрын
The music is very loud
@RustedRides
@RustedRides 5 ай бұрын
Hey, sorry about that. We have found that depending on which device it's can sounds just fine or music too loud. We are going to make some changes moving forward to fix that. Thanks for letting us know! Hope you were able to enjoy the video otherwise still
@graemeblair9801
@graemeblair9801 5 ай бұрын
FFS. At least wear an N95 when you’re sanding!!
@RustedRides
@RustedRides 5 ай бұрын
it would be a good thing to do. I think I am going to get a cupboard or cabinet to hold just masks and ppe so there will be no excuse
@Usonian7
@Usonian7 4 ай бұрын
Trucks are so big because of US emissions laws, the bigger the vehicle the less fuel efficient they have to be.
@RustedRides
@RustedRides 4 ай бұрын
This one was awful on gas
@R-Mc
@R-Mc 5 ай бұрын
Hello this the guy with the 98 blazer i can't find your email in the description
@RustedRides
@RustedRides 5 ай бұрын
Rusted rides 30 @ gmail
@R-Mc
@R-Mc 5 ай бұрын
@@RustedRides ok
@R-Mc
@R-Mc 5 ай бұрын
How can i reach you guys on my 1998 chevy blazer you have a email or anything
@RustedRides
@RustedRides 5 ай бұрын
Our email is listed in the description section of our channel l. Let me know if you can't find it
INSANE Results with Rattle Can Paint Job! - DIY No Equipment
24:29
Rusted Rides
Рет қаралды 249 М.
V8 Mini Van Engine Swap - First Start In Years!!
16:47
Rusted Rides
Рет қаралды 21 М.
НРАВИТСЯ ЭТОТ ФОРМАТ??
00:37
МЯТНАЯ ФАНТА
Рет қаралды 3,2 МЛН
39kgのガリガリが踊る絵文字ダンス/39kg boney emoji dance#dance #ダンス #にんげんっていいな
00:16
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
BEST Bed Liner Paint Job - Ford F250 Super Duty - Raptor Liner
9:04
How To Paint Single Stage With Great Results DIY -Dodge Ram Cummins
12:57
Clear Coat over Rust Paint - DIY Professional Rustoleum Paint Job
21:01
15 FASTEST AMC Muscle Cars Ever Made!
18:35
American Muscle Cars
Рет қаралды 10 М.
Repairing Rust Holes on Hummer H2
12:45
Rusted Rides
Рет қаралды 2,1 М.
Can I Transform This 25 Year Old Truck For $50?!
17:31
Joe Thurman
Рет қаралды 678
Can We Fit a V8 in our Classic Compact - Chevy Vega
19:04
Rusted Rides
Рет қаралды 74 М.
НРАВИТСЯ ЭТОТ ФОРМАТ??
00:37
МЯТНАЯ ФАНТА
Рет қаралды 3,2 МЛН