That thing was not old nor rusty, mild scrubbing with a toothbrush removed all the "rust". polymer and plastic don't rust. The moving parts moved fine after slight cleaning. He definitely stages these vids.

He did not check the trash very well. He might have missed a gold brick or a Mercedes

Person 1: ''On a scale of 1 to 10, how fake do you want this video to be?'' Person 2: ''Yes''

I am still laughing the way use that multimeter and soldering iron what a legend

As a photographer, it is so painful to see a sensor being scrubbed by a goddamn toothbrush. And what is he doing checking the "currents"? he is just randomly placing the probes on the board. smh these fake restoration channels cringe af.

This video was probably in reverse. There is no way that thing worked after washing the sensor and the electronics like that

Funny how he rebuilt the whole camera but couldn't open the battery compartment when done!

Some emery cloth on the sensor and lens would've made a world of difference too. I bet the sensor size went from crop to medium and the resolution increased from 10 million to 1000,0000,0000. Great that a multimeter and soldering iron are in fact magic wands.

12:42 the way he cleaned the sensor gave me a heart attack

I'm surprised, that now even the plastic rusts 😂😂

You should run a service :). - My camera is not working, sir - No problem, let's disassemble it and clean with a toothbrusch! This is fucking crazy...

just the fact that he is wetting all the components is enough to tell me this is not a true restore... and the testing with the multimeter is. a joke.

The good work aiming to the sun and activating flash, my hero

I see, he uses a "High End Multimeter" to check the pcb with the continuity tester function by using completely random testpoins...🤪😝😂

I don't want anyone to get mad, but I think it's easier to revive Ho Chi Minh's mummy than it is to revive that rotten camera. However, it is very interesting to see the inside of the machine.

What was the continuity testing all about, when i work on cameras, i have to use an oscilloscope, signal generator a power supply and a extremely clean environment. especially for the lens and sensor. and lots of time, and a workshop full of parts. just washing does not cut it.

Even a dry camera is almost impossible to repair if gone bad

LOL 😂😂😂😂😂😂 The test he did with the measuring device hahahaha made me laugh.

The soldering part is hilarious!

2:04 "Yes. Those sensors is perfectly fine and ready for next photoshoots..."

You found a deep fried camera, neat!

when you know how to repair a camera but have a hard time opening a battery door.

14:07 it shook the world when the almighty plastic finally get rusted and you did excellent job by restoring it yet you failed to restore your screwdriver ?

Unless you can get replacement parts for bupkiss, there's no way. Why would somebody who is skilled enough to repair a digital camera be picking through garbage anyway? I call this whole video bogus.

I bought that camera! Best door-stop I've ever owned.

wtf is he doing with that multimeter? 🤣🤣

you may fool some people but people who actually have experience with cameras and electronics know that this is not real.

Даже не верится что подобные вещи можно привести в порядок просто прочистив их зубной щёткой!

I too disassemble and reassemble lenses in a dirty shop behind my house. As long as you can get it to "mostly fit" back together there will be no problems!

Fake or not, just putting it back together would be a win for me.

11:53 Aahaha, what the f is he doing! 🤣 11:05 was also funny, but this is just hilarious.

особенно умиляет разборка оъектива)))) кто разбирал - поймет о чем я

hmmmm... he so skilled at using a multimeter, that sometimes even his bare eyes are enough to trouble shoot circuits. 🤣🤣

wow remind me of my 1st Nikon Dslr camera.. bought around 2009 😓

10:37 There is just no way you can brush a CMOS with a toothbrush and still expect it to work properly.

Well, I bought a pro Canon 1dxII from a local camerashop, and it had been submerged for a while, and then left for 4 years, as the camera repair shop said every single part and all, cables and pcb's were dead. I found the original report of repair attempts, and even spoke to the repair technician. So, I got it super cheap just to use the eyecup and the front cap, but curiosity took over, and I spent a weekend taking it semi (or halfway) apart. Used one 000 screwdriver, one pincet and a very great number of cottonswaps, an old natural hair toothbrush, plus electronics cleaner spray (a propper one), and compressed air on a can, plus the door open, to ventilate all of the isopropyl out. Phew. Not healthy to inhale, so don't! Now, I got the stuck buttons to function, actually all buttons work perfectly now, and it powers on, the shutter is perfect, all ports work, lens coupling work, reads CF cards and Cfast cards perfectly, both LCD and rear screen works, all menus work, I updated the firmware to 1.1.8 and the remaining part to do, is the mirror house and pentaprism. I suspect the problem lies in a gear that is stuck, "error 20/22", because of dissolved magnesium from the camerabody. There was lots and lots of white dissolved magnesium as powder and small "stones" everywhere, inside out. A ton of it. Now it looks completely as new on the outside and inside, and near everything works. The shutter works but the mirror only semi works. I am sure, I'll get there. Just need another weekend free of other things to do. Also, this camera lists out the shutter count as under 9000. That is seriously few shutter movements. The battery was beyond repair, so I use one from my other camera, similar, plus the charger. I could just insert new battery cells, but I prefer to get a new original battery, but not now, as I have two already. Now, I need to take apart and repair my Leica from 1954. So, to all of those who says it cannot be done: yes, it can done. This video though, is pretty "weird". Enough said. Cheers.

I think it would have been a better title if he said "An old muddy camera."

Wow didn't know glass could go rusty I feel sorry for this guy in trying to make people believe in plastic going rusty and glass tut tut

Haha nice I did not know that plastic can rust

Wow how convenient that the lens was sitting right next to the camera

Its interesting that these restoration video guys even manage to find rusty plastic

I love the prodding of the garbage bags with a stick to make it look like he's actually searching for something.

LOL The body and the lens were separated, but they stayed near this whole time. The most romantic story of the century. Oh, and they are very wet after being under the sun for hours. I know this video is purposed as a joke. I bet this guy is like, "Man, this Nikon D70 is so old and almost has no use these days. Let's turn this into KZfaq views."

I haven't watched the video but the thumbnail gives away how fake it is when you can see the plastic covered in rust.

You guys killed me with the comments. As a person who does not work in this field and has a very limited understanding of repairing tech, I thought this was real, and was EXTREMELY impressed.

WOW! I never knew it was so easy! I'll never be that fast with a multimeter, tho.

поржал с работы с мультиметром

The way you use the multimeter and soldering iron is fcking unseen

Cameras don't rust like metal :) Even though the movie is a set-up. Nikon, where it is supposed to show the durability of these cameras, is a glory for the person who efficiently breaks down this body into prime factors. I watched it out of curiosity because I use Nikon myself.🙂

저게 다 썩었을텐데 어떻게 다시 살아나냐? 대단한 기술력이다. 카메라 껍데기 벗기니깐 보통 복잡한게 아니네........

Amazing how much plastic "rusts".

Ha I didn't knew plastic can be rusted I am gonna sue my science teacher

I like that, when he put the lens back on the camera, the distance scale window was all miss alignment to the left, but after he put the battery in the camera and started to take picture, it was back top center where it belonged.

so this guy just painted a camera orange, cleaned the paint off, took it appart, and put it together back

The guy can disassemble clean and reassemble a high Tech camera with Millions of pieces but that battery door stumps him every time....

JAJAJAJJA que personaje, igual es un crack porque esto es contenido 100% humorístico.

the way you check the circuit components.....in resistor mode...… looks like completely fake.

Take two new cameras. Dunk one in mud. Clean mud off and dissasemble it then clean it some more, washing circuit boards in water so they will never work again. Put it back together. Then swap it for the other new camera to fool the viewers in to thinking you repaired it. No one will ever know.

Hi, what camera do you use to record your videos?

Found in Landfill not landfills. The Camera is RS mate, once it gets water in it there is no coming back from that.

😂🤣😁😆😂…. Movie Magic!.🤦🏻‍♂️.. The rusty Plastic, The sensor scrub, the…The Everything😂🤣

Yesssss my favorite classic stroll and a look through some random rubbish In a dirty street and randomly find an electronic device. Do you guys all read the same script?

Great job on showcasing the intricate process of repairing Nikon cameras in this video!

why all of your devices that you have found are muddy? but their location where you got it are not. just curious.

I was casually walking around when I found an x100v in the trash

He must have a memory problem, if I were to hide something in the garbage, I would find it in an instant...mind that the lens rusted also. Amazing.

I just laughed so hard through the whole thing.

The kind of "restoration" video were a device is destroyed and restored by the same person ... And the electrical test is just hilarious. And why not put the camera and the lens in the dishwasher or use the high pressure cleaner ?

It seems like that guy already knew there would be a camera to be repaired.

Plot twist: they show you the footage in reverse.

Vi diệu vậy bạn. Mình có con canon compact ixus 95is bạn sửa đc không. Cất tủ lâu ngày quá thành ra bấm không lên nữa.

This 11:05 - 11:22 part is the most intriquing, shown how super expert he is. LOL

Alternative title: "The brutal torturing of a DSLR camera".

This guy is an electronics genius! lol...

Just love the fact he set the meter to DCA, and probes around the board that has no power applied, obviously doesn’t know the basics of how to use a meter, let alone repair electronics.

these videos are like movies, we all know its fake but we watch them anyway

Wow, that's awesome

Weird how inside is clean not rusted no moisture 🧐

That battery door ALMOST won

he shouldve labeled this camera gore with the way he fucking scrubs everything with a tooth brush

Man...I just couldn't accept the fact that a man who disassembled the whole camera that takes professionals months to master properly and assemble it within minutes, while struggling to open the battery compartment. (I do think that this video is fake since no one just disposes his camera in the trash like that and the way he used detergent or something like that along with water to clean all his products, which should leave the camera disabled to even turn on)

あそこからよく直せたなと感心します

Cleaning the sensor with sopy water and toothbrush👌

Ahora sé como desarmar mi cámara si algún día lo necesito. 😊

Next he’s going to find Ferrari out in filled rusted and hes going to restore the whole car in few hrs 🤣🤣🤣🤣

good job you have amazing electronics knowledge from Bolivia 🇧🇴

Wow You are smart Bravo Bravo🙋‍♂️👌👍👍👍👍👍👌👌

Yes, get a drone shot of me looking for things in the trash

Great job

what? no example images... I wanted to see the affects of the scratched sensor. I like the torn ribbon cable for the lens to body interface.

Hi OP here, for my next video I'm going to reanimate the Queen with a toothbrush & a multimeter!

He found the lens and camera next to each other in all that mess lol gotta love these fake videos

How to make a successful FAKES channel: first you record the camera working perfectly, then you take it apart and show the assembly process with "everything clean" and then you put it back together and smear it with mud and dirt and pretend you find it casually walking while you were filming.

Next project, restoring a old&rusti finger nailclips

11:13 And why did he test for 10A while the red wasn't even in the 10A connection 😂😫

made about 100 measurements. He remembers from his head all the extinctions of the volts. OK. let me measure half for a short circuit. But he poked as if he remembers Nikon's entire scheme. The staging is complete

One day or the other I’m sure he’ll be finding a old rusty Rolls Royce and start restoring it. 😂😅😂

I opened this video just to see when will he attack it with a steel brush. Was disappointed that he didn't.

ha assemblato il display lcd senza collegare il flat cable... un genio!

It's like watching professional wrestling shows.