FUR MITTEN PATTERN

No video

FUR MITTEN PATTERN

Рет қаралды 60,534

Күн бұрын

Here is the pattern I used to make the pair of fur mittens.
Hope you enjoy!
If you are an extra large human being; you may want to widen the sleeve portion of the mitt. I also found, if you wear a lot of layers or a thick winter coat, the sleeve portion may be too narrow. Just a friendly heads up when you consider the dimensions.

Пікірлер: 68

@brianamarie7593 4 жыл бұрын

I used the template I created with this video to make a dry run pair with some extra fabric before I actually made the fur pair to check that I liked the sizing. Thank you so much for sharing your knowledge!

@SaskHunting 4 жыл бұрын

Not a problem:)

@debrabolduc9928 4 жыл бұрын

Thank you, just what I need to draft the mitten pattern, great explanation!

@raqueljimenezleon4339 5 жыл бұрын

Thank you very much for these templates!!! Thanks for sharing!!!

@Ratchety 5 жыл бұрын

Thanks for taking the time to record and share how to make a mitten template.

@th3duke1 6 жыл бұрын

You are really awesome for sharing this video with us! Sincerely appreciated.

@SaskHunting 6 жыл бұрын

+Marc Henri Thanks Marc

@opengatefarmstead3609 5 жыл бұрын

This is the BEST tutorial I could find for a mitten pattern! Thanks for sharing! Just screwed up my first pair due to the pattern.... they ended up child sized hahah

@Gdddguhjkbfs 4 жыл бұрын

Do you have a printable version of this Mitten template I'm sure we're all willing to pay for it!

@frankcampbell9197 8 жыл бұрын

What great videos about making mittens. I am making my son and his wife a pair with beaver inside, Mt coyotes for the out, and leather from a deer hide for the "ties". Can't wait to get started.....Pics later (I hope)

@SaskHunting 8 жыл бұрын

+Frank Campbell Thanks Frank, it's a fun project! Sounds like you will have a pair really warm mitts!

@NickPellegrene 8 жыл бұрын

Thank you for making these videos, they helped me a great deal!

@SaskHunting 8 жыл бұрын

Glad you enjoyed them Nick, thanks for watching!

@ramoutdoors6415 8 жыл бұрын

Loved this vid. Tan my own furs from my trapline and have been wanting some mits. This is the best vid ever for this. Thank you much................Richard from Kansas:)

@SaskHunting 8 жыл бұрын

Glad you enjoyed them Richard! It's a fun little project:)

@doloresnorton4427 Жыл бұрын

You’ve done a great instructional video! Thanks!

@SaskHunting Жыл бұрын

Thank you:)

@aronmcinnes8313 2 жыл бұрын

Thank you for this excellent video. I have been looking for a pattern for beaver mitts and this is great.

@SaskHunting 2 жыл бұрын

Thanks, hope you find it useful:)

@melvinkidd1813 4 жыл бұрын

Thanks for the template you really done a good job on it I appreciate it thank you

@SaskHunting 4 жыл бұрын

Thanks sir

@TasiaValandomeni 5 жыл бұрын

Great video but OMG trying to follow these measurements were so confusing but I eventually got it :)

@SaskHunting 2 жыл бұрын

This is one of my first videos; it is what is. Lol

@jbbolts 2 жыл бұрын

was watching thinking to myself the whole time the actual measurements are pointless ... as it turns out our hands are identical lol.... I just got a fur sewing machine and a walking foot for the tougher stuff as well.. thanks for the videos very helpful!

@chaz4471 3 ай бұрын

❤❤❤thank you

@SaskHunting 2 ай бұрын

You’re welcome

@JimKat05 5 жыл бұрын

Thank you!!!!

@bertrandespougne7092 5 жыл бұрын

Thank you !

@michaelbrigman3516 8 жыл бұрын

Great channel. I subscribed.

@nielsonnc 8 жыл бұрын

I love your videos!

@SaskHunting 8 жыл бұрын

Thanks Nicole, appreciate it!

@m_michelle_5 8 жыл бұрын

Great looking mittens. Im having a lot of trouble getting the thumbs right. DO you or anyone else have a pattern that can be printed off?

@davidanderson7698 2 жыл бұрын

Thanks so much! Found myself in the same predicament searching online and not finding anything

@SaskHunting 2 жыл бұрын

Ya, not a popular item that normal people tend to make from scratch 😂

@nraesmith Жыл бұрын

I don't understand how you came to the garment measurements from your hand measurements? Did you just add a certain amount to your hand measurements, or increase the size by a percentage?

@joelongstaff7601 8 жыл бұрын

Great video thankyou. We went to the reuse store and I found some old fur coats for $10.I wonder how mink mittens will look.

@SaskHunting 8 жыл бұрын

Sweet! Mink will look great:)

@georgewalker2680 5 жыл бұрын

Great vid, check out his coyote hat vid, excellent

@grahamnicholson6567 3 жыл бұрын

I can't believe how longwinded this video is and how obvious it is after 15 seconds and how it takes 37 minutes for you to make your point that could be done in 3 minutes. I also can't believe how many people think it's great. You need the patience of Job to wade through this.

@leedarkfeathers 9 ай бұрын

Im super late to the party but this will be nice for my rabbit stash. If i wanted to do a trigger mitt, do you think theres a whole lot of extra steps invoved or should i be ok just rounding off a finger from the main part?

@SaskHunting 9 ай бұрын

Can’t see it being a major issue, but you may want to do a mock prototype with random material first to ensure that the pattern is correct before you use it on a fur?

@wendymiller9932 6 ай бұрын

Just found this video, are the templates still available? And if so, where might I find them?

@SaskHunting 6 ай бұрын

This is the “how to video” on how to make a custom made pattern to specific measurements. This will give you the knowledge to create your own custom measurements. This is necessary as you will not want to go through this entire process and later realize it’s too small or too big. Just saying:) personally this template is a little too small for me in the flared gauntlet. Live and learn;)

@benjy111100 3 жыл бұрын

What is the thickness of the wool that you lined your mittens with, and where did you find it? Would you go that same route again? I just cut out this pattern. Going to do a mock up and then make a go at it with beaver.

@SaskHunting 3 жыл бұрын

It was a repurposed shearling coat. It was approximately 3/4” thick . Purchased the coat at value village in Saskatoon for $20 I think; wore it for years previously. Just didn’t wear it anymore and needed a liner for this project. It was kind of hard to cut the coat up, but it went to a good cause!

@nielsonnc 8 жыл бұрын

You should make slippers

@blakechristian3565 8 жыл бұрын

GREAT JOB!!! VERY HELPFUL !!!! Thank you so much for sharing this! Also is there anyway I can buy the pattern? I will love to.

@SaskHunting 8 жыл бұрын

Thanks Blake! Sorry I don't sell the pattern. I posted the video for who ever wants to make a pattern for free:)

@tomsawyer247 Жыл бұрын

Is there pun intended with the tem plate.

@jcreptiles6276 6 жыл бұрын

How many muskrats would it take to make a pair of these, would three xl muskrats be enough?

@lwoodball3676 2 жыл бұрын

😀Never mind muskrats, how much wood would a woodchuck...

@SaskHunting 2 жыл бұрын

If snakes had arms; would they wear vests??

@SaskHunting 2 жыл бұрын

You would have to tan a shit ton then make your template and go from there sir.

@sheriisaac 2 ай бұрын

What kind of paperwork you trace on. Thanks 😊

@SaskHunting 2 ай бұрын

Butcher paper lol. Not the waxy side.

@Francois_Dupont 2 жыл бұрын

would it be possible for you to scan the template? it is almost impossible for somebody not english to follow the complex instructions.

@Moumoulynx Жыл бұрын

Pour voir plus en détail sa t aurais pris un crayon à encre noir pour bien élustrer ton travail .

@SaskHunting Жыл бұрын

Yes, there is a lot of things I should have done better! Ha!

@elizabethmichelin7451 5 ай бұрын

Is thus the second video? I couldn't understand how you got measurements and what the pattern piece you used had to do with drafting. Just puzzled

@SaskHunting 5 ай бұрын

Sorry for the late reply, there is a series of videos, then a template video I believe.

@elizabethmichelin7451 5 ай бұрын

Where can I find the other videos?

@stevecolberg7550 2 жыл бұрын

You should just post a picture with the final dimensions. Love the look of your mittens but this video is pretty painful to watch.

@SaskHunting 2 жыл бұрын

You have to really want to make a pair of mittens to watch this video! I went a little overboard on the explanation! Lol

@lwoodball3676 2 жыл бұрын

I disagree, the explanations are very valuable.

@leomoreno8578 6 жыл бұрын

Eres aburrido