Making Rings with Cutlery - Ring Bending Tool

Рет қаралды 21,480

Жыл бұрын

We just got a PepeTools Ring Bending Kit! This video is me trying it out to make some interesting rings out of interesting spoons!
If these videos helped you with a project consider buying me lunch!
www.paypal.me/holbrookphoto/5usd
Buy a "Thumbs Up For Safety" hat and support the channel! rb.gy/4oqz8f
Leave the comment section for questions and comments related to the project. I'm happy to answer questions but I'll ignore trolls or overall useless comments. I spent a lot of time documenting and creating my videos and my goal is to help someone else with their projects.

Пікірлер: 39

@gingerferguson6703 2 ай бұрын

Thank you for including your "mistakes" it helps to give a newbie like me reassurance .

@WeBuildStuff 2 ай бұрын

Keep going until you get it! Thanks for watching!

@ottopartz1 Ай бұрын

If you're buying a vise for doing work like this, look at wood working vises. Mine has countersunk provisions for screwing wood on to the face from behind. I have soft wood on mine and it works amazingly well for anything i don't want to mar up. I've also custom carved pieces for specific applications in the vise

@kerlygerl 8 ай бұрын

Enjoyed this. Thanks!

@tommycrankx 7 ай бұрын

Absolutely love this, thanx for all the help and inspiration. I currently own a Dremel and wanted to put it to good use. This will work perfectly😊❤❤

@juniorlopez6761 Ай бұрын

Size 14 1/2 fit’s me ⭐️GOOD😂

@samsa4650 8 ай бұрын

love this thank you

@WeBuildStuff 8 ай бұрын

Thanks for watching!

@Vanstopper Жыл бұрын

🔥intro

@cool_holbrook13 Жыл бұрын

W intro ヾ(≧▽≦*)o

@barryphillips3050 2 ай бұрын

Excellent video . Real interesting. You left the curved end for fishing lures , can you make a spinning lure with this tool , thanks

@WeBuildStuff 2 ай бұрын

I don't see why not! I've driiled holes in the spoon end and attached fishing hardware in the past

@jakkibaker1818 7 ай бұрын

Thanks for the video mine coming this week can I use any type of metal or just s/silver need to practice before using s/silver ,thanks again 😊

@WeBuildStuff 7 ай бұрын

we've used sheet metal, cutlery, brass, and almost any flat metal

@jakkibaker1818 7 ай бұрын

Thank you for that 😊can go looking for metal cutlery to practice on thank you again 🙂

@moniregb5682 Ай бұрын

Hi. Great videos. Can you only use silver spoons, or can you use stainless steel as well. Thank you. Claire.

@oidi Ай бұрын

stainless steel cutlery works fine too. Be carefull with the thickness of the piece though, as they are a lot harder to bend and takes time to get perfect roundness. Also, if you are using a really cheap ring bender, the stainless steel could possibly cause the ring bender to fail & break.

@moniregb5682 Ай бұрын

@@oidi thank you for replying.

@oidi Ай бұрын

@@moniregb5682 your more than welcome, also wanted to give a quick tip, especially when using stainless steel, make sure you have the sized length of cutlery your using flat to the bottom of the nylon die when bending, becuase if you dont, after bending all around, it will be warped, and stainless steel is very unforgiving when trying to correct it ;)

@moniregb5682 Ай бұрын

@@oidi brilliant advice. Once again thank you

@_nevoa 7 ай бұрын

Do u recomend any other bending tools that are not so expensive and work well ?

@WeBuildStuff 7 ай бұрын

You can find cheaper versions on Amazon/wish/alibaba. I do not have experience with those

@emilymilano1239 7 ай бұрын

hey there, do you recommend a certain vice or will most vices do?

@WeBuildStuff 7 ай бұрын

Buy what fits your space. We use Irwin vices as they are what is available at our local stores a.co/d/boumywT I prefer a 4-5" vice myself for personal use

@catherinemartina6469 4 ай бұрын

Are the spoons you use silver or silver plated. Also do you anneal the metal before you bend?

@WeBuildStuff 4 ай бұрын

The ones shown in this video are all cheap plated souvenir spoons

@hercqlees8114 8 ай бұрын

Nice video! Where did you get your ring bender?

@WeBuildStuff 8 ай бұрын

pepetools.com/products/superior-ring-bending-tool

@taylordupont6787 4 ай бұрын

How do I make different sizes?? Size 6,7.5, 8.5, etc. or is it assumed you just take the closest sized dye??

@WeBuildStuff 4 ай бұрын

I wouls change your die size and use a ring mandrel to make it perfect. Of course many of the "pro-commenters" will probably say something different to do with industry standards but if the end product works then I say good enough!

@andrejesse 5 ай бұрын

In our ring bending kit there’s a parallelogram what is it used for ?

@WeBuildStuff 5 ай бұрын

Sharp bends. Don't snap the die or press too hard!

@tinaclarke704 2 ай бұрын

What do you do for cleaning? What price should you be paying for spoons?

@WeBuildStuff 2 ай бұрын

At the moment we just sand to a high grit a polish with red polish compound until they feel smooth. I try to get donated spoons for the classroom or buy in bulk from thrift shops

@alfonsedente9679 5 күн бұрын

You can steal a spoon, which makes it free. .25 cents in a goodwill store. $200 from Tiffany's. Cleaning is the same method for a spoon (even though it looks like a ring, its still a spoon. MAGIC!)

@otterlycharmingUSA 9 ай бұрын

In case you don't know where you went wrong, ring sizing is based on gauge (the thickness of the metal). You needed to use a ring sizing chart that showed your metal by gauge so you can cut the length accordingly.

@WeBuildStuff 9 ай бұрын

Link a chart for others to see please. This was day 2 playing with this tool and just a quick intro for kids so they don't destroy the equipment within the first week. Making the rings perfect will take some practice but for now it's been fun to play with.