Glad you like our instruction video. You can also check out our video on wrapping furniture with rounded edges.

Hi Chris, thank you so much for this kind comment! We love to hear that. Could you share some pictures with us? We'd like to share this on our social media platforms. We'd also like to tag you, if that's okay. You can send the images to marketing@grafityp.com and if you want you can add your Facebook/LinkedIn/Instagram username. Thank you so much! Have a nice day. - The Grafityp-team.

Could you please tell me how it lasts since you wrapped the desk? I want to wrap the desks of my both daughters, they use their desks frequent and a few hours a day for doing their homework, gaming and doing their make up. Is it hard to remove if they want to change it after a while?

@fns58 thanks for your comment! Follow us on our page grafitypselfadhesiveproducts for the most recent videos🤓 We are more active on that account! 👉 www.youtube.com/@Grafityp-SelfadhesiveProducts

Thank you for the compliments ;o)

Thank you so much for this kind reaction, love to read this! Have a nice day. Greetings The GRAFITYP-team.

Thanks, follow us on face book and instagram!

Thank you for your reply! Good to hear it's useful for you. Good luck! Greetings The GRAFITYP-team.

I find it does stick or last as well heating it and pulling it over the edges, then I guess it depends what your covering and the use it gets.

thanks! foloow us on FB and instagram!

Thanks for the nice feedback! Have a nice day. Greetings The GRAFITYP-team.

We are very happy to hear that this instruction video was helpful to you. Just follow us on Facebook and Instagram for more tips & tricks.

Hi, thank you for your kind words. Good luck! Greetings The GRAFITYP-team.

We're glad you found our video useful. Thanks for your reply! Best regards, the Grafityp-team.

You can follow us on Facebook or Instagram for more tips and information about our products.

Thank you so much for your kind comment! Have a nice day :)

Thanks for your reply! Kind regards, Jennifer from Grafityp.

Thanks, follow us on FB and instagram!

Thank you for your kind reply! Kind regards, Jennifer from Grafityp.

Glad you like this instruction video. Just follow us on Facebook and Instagram for more tips & tricks.

@@Grafiwrap In your video description and details, you may want to include direct links to your content, for your audience.

Thanks for the tip! We'll work on that :)

How did you get on wrapping your kitchen with d-c fix vinyl? I bought an A4 test piece in sage green, but it felt very thin and flimsy. I’m not sure whether to buy a full roll, or look for another brand? 🤔

Good luck with your first wrap! Kind regards, Jennifer from Grafityp.

Thanks, follow us on FB an d instagram

Thanks for your kind reaction! Greetings The GRAFITYP-team.

Thank you for your kind reply. Have a nice day! Greets, the GRAFITYP-team.

Thanks, there is more and will be more in other applications soon!

Thank you! Greetings The GRAFITYP-team.

Hi Bella, thank you for your kind reply to our video! Glad you loved it. And no, unfortunately. A hair dryer doesn't generate enough heath. You really need a heat gun. Good luck! Kind regards, The Grafityp-team.

Hi Florian, thank you for your kind reaction. We are sorry to inform you that we don't have ESD film.

Thanks for your reply! Unfortunately, we don't have this. Have a nice day! Greets, the GRAFITYP-team.

Hi @ms-gn4gl, clever observation! You can find a video on that specific topic over here: kzfaq.info/get/bejne/aLVyd6ZlprOrkXU.html.

Hello Chris, thank you for your reply. We have an other tutorial video for rounded edges. Go check it out: studio.kzfaq.info/love/comments. Good luck! Have a nice day. - The Grafityp-team.

Dag Martine, Wij helpen je graag. Eind deze maand komt er over afgeronde hoeken ook een instructie video. De werkwijze bij afgeronde hoeken verschilt niet zo veel. Het hangt er een beetje vanaf hoe strek de afronding is. 1. Als het een afgeronde 90°-hoek is, ga je best te werk zoals in methode 1, wrappen met overlap. Je wrijft hiervoor de folie zo over mogelijk aan tot je een plooitje zou maken. Vanaf dat punt snij je de folie door. Kleef 1 kant over de afgeronde hoek. Je zult zien dat er aan de onderkant meer overlapping zal zijn dan op de plaats waar je begonnen bent met aanwrijven. Snij daarom een stukje in de vorm van een driehoek weg zodat je later geen te grote overlapping zult krijgen. Plooi met behulp van warmte het 2de stukje over het eerste. Druk alles nogmaals goed aan. Snij van het 2de omgeplooid stukje ook het teveel van folie weg zodat je een totale overlap van maximaal 5 mm. krijgt. Snij hierbij niet door de onderliggende folie. Warm nogmaals op en een laatste keer goed aandrukken als de folie terug handwarm is. 2. De folie doorsnijden zoals in "wrapping without overlap" is af te raden bij afgeronde hoeken. De folie staat te veel onder spanning om niet na een tijdje open te trekken. 3. Wrapping without cutting the film: dit kan lukken maar vergt voldoende ervaring. TIP: Om lostrekken van de folie op de onderrand te vermijden snij je het overschot best niet aan de onderrand van de tafel af. Plooi de folie ongeveer 2 cm over de onderrand en snij daar dan het overtollige weg. Op de rechte stukken is dat gemakkelijk te doen, in de bochten snij je de folie door in 1cm brede stroken alvorens hem warm te maken en om te plooien. Wij hopen je hiermee voldoende informatie verschaft te hebben en wensen je veel succes. Vriendelijke groeten, Applicatie team Grafityp.

Wist je trouwens dat Grafityp erg professionele opleidingen geeft? Op www.grafityp.com vind je alle uitleg over deze cursussen.

@@JohanMoons Replying to an English language comment in a different language, hmmm, right ok.

Hello Michael, thanks you for your response. You can use the complete range of Grafiwrap Automotive & Deco films. Have a nice day! Greetings The GRAFITYP-team.

@@Grafiwrap my question was, out of the three methods of application, which one was the best? Ie the heat shrink cutting method ect...

@@michaelswaine6303 All three methods are great, depends on your personal preference.

We're sorry to not have replied sooner on your feedback, which we consider very valuable! We keep in mind to also film an instruction video on table legs in the near future. Meanwhile, hope you can find some input in this video which shows you wrapping rounded edges of furniture: kzfaq.info/get/bejne/aLVyd6ZlprOrkXU.html. 🤓 PS. Follow us on grafitypselfadhesiveproducts, we're much more active on that account!😀Good luck! Kind regards

Hi, in terms of our leather deco films, the same method is applicable indeed. This method is applicable to all our wrap films. Kind regards, team Grafityp

No, it doesn't ruin the desk. Film comes off without any problem by heating it.

Hello, you can find out everything at www.grafityp.com. For questions about local dealers, please contact export@grafityp.com

Hi Mohan, This wrap was done with GrafiWrap AMD DECO films. These films have a thickness of 140 to 200 µm, depending on the chosen motif. A thinner film does not make wrapping easier, quite the contrary. In the case of a thin film, we recommend laminating it first to give it a bit more body. Hopefully this will help you. :-)

GrafiWrap Leather and Deco films (www.grafityp.com/product/leder-deco/)

Hello, this is our PVC Wrapping film. You can find all the films on our website: www.grafityp.com/producten/wrapping-films/. Have a nice day! Greets, the GRAFITYP-team.

Hi Victor, thank you for your question. Heat is used to seal the film and stretch film on e.g. a round table. Hopefully this will help you. Kind regards, team Grafityp.

Hello Splendid Truth, thank you for watching our video and for your reply. This is a molded wrapping film. It has a lifespan of up to 5 years when used outdoors. In indoor use (which is applicable for furniture wrapping), the service life is much longer, but no measurement data of this are possible). You can find all information on our website: www.grafityp.com/product/msc/ Have a nice day. Regards, The Grafityp-team.

We used our Grafityp wrapping film D01x02 - Antiqua Black Check our all our decorative wrapping films on our website: www.grafityp.com/group/wrapping-films/decorative/ Have a nice day! Kind regards, the Grafityp-team

Hello, thanks for your reply. Unfortunately, a hairdryer isn't hot enough. You need a heat gun. Kind regards, Jennifer from Grafityp

Removal is no problem. You just have to heat the vinyl before removing it.

Hello, no it doesn't damage the wood. The film comes off easily by heating it. Have a nice day! Greets, the GRAFITYP-team.

Grafiwrap Automotive & Deco films. These films are specially designed for car wrapping and interior decoration. For more info, visit: www.grafityp.com. Kind regards, Jennifer from Grafityp

Hi, Yes sure you can. Don't forget to tag us as well on Instagram: @grafitypselfadhesiveproducts. Kind regards, Jennifer from Grafityp.

@@Grafityp-SelfadhesiveProducts thanks a lot

I had to post it again! The title picture was just gray! 😊