Fused then Slumped! But How Did it Go? Fused Glass Project

Fused then Slumped! But How Did it Go? Fused Glass Project - Part 2

Рет қаралды 1,197

Күн бұрын

It started as a pot melt, that became a feature in this fused glass bowl. It was a long process, especially the strip construction. But after all that, how did it work out?
Don't go away! Follow this adventure and wait till the end to see the final result.
📌This is Part 2 of this project. You can find Part 1 here - • A Pot Melt What? A Bow...
🔴 Join Membership - / @rocketroseart
This will open KZfaq in a browser so you can join.
🔴 Subscribe - / @rocketroseart
⏱️ Chapters ⏱️
0:00 Intro & Details
2:21 Cutting
9:57 Coldworking
13:02 Fire Polish
13:50 Slump
📌 Other Glass Fusing Videos
Pot Melt - • Monster of a Pot Melt!...
Pot Melt Bowl Part 1 - • A Pot Melt What? A Bow...
🎥 Fused Glass Playlists - / @rocketroseart
💥 Fire Polish Firing Schedule
1 - 222 C (432 F) up to 535 C (995 F), hold 60 minutes
2 - 333 C (632 F) up to 725 C (1337 F), hold 20 minutes
3 - Full down to 482 C (900 F), hold 60 minutes
4 - 65 C (149 F) down to 425 C (797 F), no hold
5 - 132 C (270 F) down to 371 C (700 F), no hold
💥 Slump Firing Schedule
1 - 167 C (333 F) up to 620 C (1148 F), no hold
2 - Full down to 482 C (900 F), hold 60 minutes
3 - 65 C (149 F) down to 425 C (797 F), no hold
4 - 132 C (270 F) down to 371 C (700 F), no hold

Пікірлер: 47

@RampRateArt 2 ай бұрын

This is brilliant! 😮 I love the juxtaposition between the solid & the transparent glass! I am sure it is bitter sweet closing down your shop. Best…

@RocketRoseArt 2 ай бұрын

Yes, you are right. But I think it is the best time. Though it's not stopping me working with glass.

@jokappel2430 3 ай бұрын

Jeff it is amazing, the depth between the rings of color, you outdid yourself

@RocketRoseArt 3 ай бұрын

Thanks Jo. It's not perfect, but they never are. Part of the fun.

@donnapolly7203 3 ай бұрын

For marking I have had good luck using a Sharpie pen then coating the line with chapstick or blister. Well done Jeff!

@RocketRoseArt 3 ай бұрын

Hi Donna. I tried that but it didn't work for me. What's you secret?

@donnapolly7203 3 ай бұрын

Well, I goober it on pretty thick... I have to admit I haven't had cuts as long as yours. Maybe beginners luck 😂

@lornasaner1130 2 ай бұрын

The jagged edge cool. I would use the whole thing for a bowl.

@RocketRoseArt 2 ай бұрын

Hi Lorna. It was, but that meant it overlapped the edge of the mould. I had a little concern about that.

@rtd217 3 ай бұрын

Absolutely beautiful!

@RocketRoseArt 3 ай бұрын

Thank you so much!

@treefroglyn 3 ай бұрын

Thanks for the paint pen with the Taurus cutting. I have to wear a head lamp to see where I am cutting but have lost the line to the water lots of times. I also use vinyl templates cut on my cricut but they also start slipping and sliding.

@RocketRoseArt 3 ай бұрын

My pleasure. It drives us all mad.

@carmensparks6950 3 ай бұрын

It's beautiful! And so glad you will continue doing your videos. Love all of them!

@RocketRoseArt 3 ай бұрын

Thanks Carmen.

@chrisc.czarnopys7618 3 ай бұрын

Beautiful piece!❤

@RocketRoseArt 3 ай бұрын

Thank you! 😊

@CraigConnors 3 ай бұрын

I use an oscillating sander with a vacuum connected and 400 grit sand paper to rough up the surface. Quite a stunning result.

@RocketRoseArt 3 ай бұрын

Is it under water or you just rely on the vacuum?

@CraigConnors 3 ай бұрын

@@RocketRoseArtIt's a pneumatic oscillating, not electric, I spray the glass with a little soap in the water that way the bubbles will also keeps any dust that would be created moist and not flying around and the vacuum sucks up the fluid with the glass particles. No sand blaster needed then and I just use a half sized storage bin for the work area. The sander was from Harbor Freight (40 dollars) and the storage container from Walmart (4-5 dollars).

@RocketRoseArt 3 ай бұрын

It sounds like a great option. I hope others read this. More options are always great.

@stephencouitt3831 3 ай бұрын

Nicely done!

@RocketRoseArt 3 ай бұрын

Thanks Stephen. Appreciate your comments.

@3PairDesigns 3 ай бұрын

Jeff, first of all, congratulations on actually honoring your retirement, lol! I am very happy for you and your wife, good for you! The platter looks beautiful, as always your precision and methodology is unmatched. I thought the reverse side looked pretty good too, so I was a bit surprised you didn't opt to slump that side face up. It didn't have those random salmon colored dots, at least that I could see, perhaps I missed it though. It ended up being beautiful regardless. Looking forward to your wonderful videos...when you get around to the next one that is, you ARE retired after all so start enjoying what YOU want! 😁❣ As always, thank you for sharing!

@RocketRoseArt 3 ай бұрын

I hope to continue as usual. But you may see some very weird designs. 😁

@rosalienellartglass 3 ай бұрын

Best wishes on retirement and making what YOU want!

@RocketRoseArt 3 ай бұрын

Thank you. Well, almost what I want. There are always exceptions. 😁

@user-cw6lx6mn9n 3 ай бұрын

Ficou perfeito! Fantástico! Obrigada! 🩷🌷

@RocketRoseArt 3 ай бұрын

Obrigado

@lolomorr6563 3 ай бұрын

Think it is beautiful!

@RocketRoseArt 3 ай бұрын

Thank you.

@paulrosel9923 3 ай бұрын

vert nice!!!

@RocketRoseArt 3 ай бұрын

Thanks Paul.

@mariannepotter8159 3 ай бұрын

All the best to you Jeff! Enjoy your day 😊

@RocketRoseArt 3 ай бұрын

You to Marianne. Hope all is well.

@ClaytonClytn 3 ай бұрын

Top👍🇧🇷

@RocketRoseArt 3 ай бұрын

Thank you.

@treefroglyn 3 ай бұрын

I love your flat lap. What kind is it?

@RocketRoseArt 3 ай бұрын

It's just an old lapidary lap I purchased some years ago used. Very basic but does the job, mostly. Not sure about the brand.

@jenmather4112 3 ай бұрын

Hi Jeff. Can you tell me what kind of media you are using in your sand blaster? I always enjoy your videos.

@RocketRoseArt 3 ай бұрын

Hi Jen. Silicone carbide.

@jenmather4112 3 ай бұрын

@@RocketRoseArt thank you so much!

@lornasaner1130 2 ай бұрын

Oops, sorry. I thought you were going to cut the blue green squared off.

@RocketRoseArt 2 ай бұрын

I was trying for a wobbly look to the lines. The blue green representing water that seemed appropriate.

@nisarmomin3214 3 ай бұрын

kzfaq.info/get/bejne/iJOaoZyW1am-eqc.htmlsi=pT1QjdDTzvVUk1h4 🔖📚kzfaq.info/get/bejne/ZuCdi6inlcDScnU.htmlsi=xyb6CyhDQkHVBxkJ Dear Jeff, reaching directly to inquiry, pardon for this. But wonder if you can give your insights on these both methods. I don't know what materials decals are made of, and in the Derek's method, no doubt he is hand painting the glass with special stain colour and then firing in kiln. The stain is probably called 'silver stain' thus name stained glass came. But if you can make an informative video on discussing and demonstrating on both the techniques, it will be very knowledgeable.

@RocketRoseArt 3 ай бұрын

Honestly, I think Derek has a wonderful channel and he is the best source for information on that technique. He has multiple videos that cover all techniques. I don't have his experience so anything I do would be as an amateur. @DerekHuntArtist Regards decals, I'm not sure about the medium. I did enquire once but they wouldn't part with the information. And Derek is using enamels as well.

@nisarmomin3214 3 ай бұрын

@@RocketRoseArt thanks a lot Jeff, I am still unclear about the photograph you transferred on glass, is it fired after the imprint? what materials these stickers are made of ? BTW i really appreciate your explorations with precisions and spontaneous fabulous artworks you venture in !