Ouch! Making this Strip Construction Platter from My Jumper was Pain in the Back, Project Tutorial

  Рет қаралды 2,254

Jeff Pritchard

Jeff Pritchard

Күн бұрын

This hurt! My poor back! But this design from my jumper made an amazing platter. Making a fused glass platter using strip construction, based on a design on my jumper, sounds a little strange. But it turned out beautiful. This glass fusing tutorial will show you just how I made this platter using strip construction basics and received a pleasant surprise in the process.
🔴 Subscribe - / @rocketroseart
⏱️ Chapters ⏱️
0:00 Intro & Details
2:02 Design, Materials & Equipment
5:41 Cutting the Glass
7:20 Assembling the Components
10:59 Full Fuse Firing
13:44 Coldworking
14:24 Fire Polish Firing
15:14 Slump Firing
💥 Full Fuse Firing Schedule
#1 - 222 C (432 F) up to 535 C (995 F), hold 60 minutes
#2 - 333 C (632 F) up to 805 C (1481 F), hold 10 minutes
#3 - Full down to 482 C (900 F), hold 60 minutes
#4 - 83 C (182 F) down to 375 C (707 F), no hold
💥 Fire Polish Schedule
#1 - 222 C (432 F) up to 535 C (995 F), hold 60 minutes
#2 - 333 C (632 F) up to 730 C (1346 F), hold 5 minutes
#3 - Full down to 482 C (900 F), hold 60 minutes
#4 - 83 C (182 F) down to 375 C (707 F), no hold
💥 Slump Firing Schedule
#1 - 167 C (333 F) up to 620 C (1148 F), hold 5 minutes
#2 - Full down to 482 C (900 F), hold 60 minutes
#3 - 83 C (182 F) down to 375 C (707 F), no hold
📌 Other Glass Fusing Videos
🎥 Glass Weaving - • Glass Weaving Demystif...
🎥 Frit Dolphin Bowl - • Crush some glass! Make...
🎥 Segment Bowl - • Neat Fitted Segments, ...
🎥 Fused Glass Playlist - • Fused Glass Projects

Пікірлер: 55
@JudithMcFadden
@JudithMcFadden Жыл бұрын
What a beautiful piece. Love how the French vanilla turned out.
@RocketRoseArt
@RocketRoseArt Жыл бұрын
Hi Judith. Yes, unexpected and one of those beautiful surprises.
@ProfessorDesiree
@ProfessorDesiree 2 жыл бұрын
It turned out great! I’m glad you showed the way the French Vanilla turned out. I see a lot of french vanilla in strip construction, but I never would have guessed that was only French Vanilla. I would have tried to put some yellow or something, so you have saved me a mystery. So neat! Thanks for sharing your process.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Glad I could help. Good luck if you give it a go.
@user-wd7uh6pt2x
@user-wd7uh6pt2x 8 ай бұрын
Wow!!!!! That's incredible!!!! Absolutely beautiful!
@RocketRoseArt
@RocketRoseArt 8 ай бұрын
Thank you. One of my favourites.
@laurajones6486
@laurajones6486 2 жыл бұрын
I would have to have the pattern printed on the thin fire or I would screw up the pattern for sure. But I love it .you come up with the greatest ideas.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Laura. As I did 😁 But you can do that. I've done that and had no trouble with the ink burning off. The only problem I had was getting the pattern the right size when it was printed, and then due to slight variations in the pieces, it didn't line up exactly anyway.
@dojojones496
@dojojones496 2 жыл бұрын
Jeff thanks for the very quick response! I was able to download the pdf, it was me. Technically challenged.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Happy to help.
@3PairDesigns
@3PairDesigns 2 жыл бұрын
Wow! Brilliant! That was a very complex pattern to assemble and I love how you worked it out on graph type paper. That is a beautiful design, wonderfully executed with a happy surprise at the end! That French Vanilla can be a fickle mistress! Jeff, that is just a beautiful piece, thank you for sharing! 😊💖
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi. Actually, I love doing complex designs. Something satisfying. Probably comes from years of developing software and the process of putting all the individual pieces together. 😁
@suzannenishida1849
@suzannenishida1849 Жыл бұрын
Nice effect from the mesh Jeff!
@RocketRoseArt
@RocketRoseArt Жыл бұрын
Thanks Suzanne
@cherieknopf8536
@cherieknopf8536 2 жыл бұрын
Very inspiring.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Cherie. Working on another using the same technique. Should be finished this week. Part 1 was just published.
@Lisa-yj8dt
@Lisa-yj8dt 2 жыл бұрын
That came out wonderfully! It does look like a textile. It reminds me of a Navajo blanket. I still haven't mastered cutting, but I hope I will get better someday 😁.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Lisa. A few more little cuts to the hands, a few more broken strips, a lot of those words and you'll be an expert. 👍
@pattiporco8598
@pattiporco8598 2 жыл бұрын
I have to say this is one of my favorite videos that you've done, Jeff. Great finished product!
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Patti. Thanks. Glad you like it.
@kimrime796
@kimrime796 Жыл бұрын
Brilliant! I would love to have a downloadable pattern
@RocketRoseArt
@RocketRoseArt Жыл бұрын
Hi Kim. I can see you found it on our site. Enjoy and thanks for the donation.
@rosalindfitzpatrick8330
@rosalindfitzpatrick8330 2 жыл бұрын
Really enjoyed this! Another way of using glass geometrically. I normally like the natural edges but in this case grinding the two sides made it much sharper! Lovely.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Rosalind. I agree. The organic nature of natural edges is nice. Strange thing from a guy with a touch of OCD. But geometric designs call for symmetry.
@susanringrose851
@susanringrose851 2 жыл бұрын
Great video as usual thank you x
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Susan. Thank you for watching. 😃
@ericaholz3553
@ericaholz3553 2 жыл бұрын
Wowza! My colourwork knitting patterns have taken on a new meaning for my Glasswork! Thanks Jeff, glad I found your channel 😀!!
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Erica. Funny where inspiration comes from. 😀 👍
@uglypatriot5171
@uglypatriot5171 2 жыл бұрын
Hi Jeff, brilliant design! Love the lines in the vanilla. I can’t seem to get cutting strips right, I break far too many. Very annoying however, I will persevere. Thanks for the link on your website 👍🏻
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Ed. Do you cut in multiples of 2 then progressively snap in pairs? I do that where possible. It spreads the load more evenly between pairs. If I use the guides then that's not possible and I have to score and snap individually. You need a good score. Try starting the snap from both ends. Gently start the snap so it starts running, then turn the glass around and complete it from the other end. Make sure the glass cutter is good and use lubricant. Not sure if this helps.
@uglypatriot5171
@uglypatriot5171 2 жыл бұрын
@@RocketRoseArt Hi Jeff, just tried the running pliers from both sides with gentle pressure, worked a treat 😀 thanks for the advice 👍🏻
@468cassie
@468cassie 2 жыл бұрын
I love this design! Thank you so much! Strip cut projects are my favourites but they are fiddly so your meticulous instructions are much appreciated.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Melissa. Yes, a bit tedious, but always a great result.
@gabriellefogle3749
@gabriellefogle3749 2 жыл бұрын
Just beautiful! What a great inspiration! Thank you.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Gabrielle. Great to know it is.
@StephFuses
@StephFuses 2 жыл бұрын
I took a pattern bars class at bullseye many years ago. I used French vanilla in my finished piece. Problem, where these butted up against each other. The theme was very visible. The man teaching the class was a bull's eye employee, and he says that striping has something to do with the way French vanilla is made and how it's cooled.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
That would make sense as you only seem to see it when the edge is exposed and fired, or in frit. When it's fired flat it's mainly all one colour, though I have noticed small patches that are lighter occasionally. Probably due to the handmade process.
@StephFuses
@StephFuses 2 жыл бұрын
@@RocketRoseArt It was eye opening to me, because I was a raw newbie (2 classes and a week with a kiln) and I had no idea how glass behaved.
@JG-rq1ws
@JG-rq1ws 2 жыл бұрын
Beautiful. Thank you for sharing.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
My pleasure J G
@mariongrinstead8459
@mariongrinstead8459 2 жыл бұрын
Please could I have the PDF for this project. Looks great!!
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Marion. You'll find a link in the description for this on our website. You can download it from there. Hope this helps and good luck with it.
@mariongrinstead8459
@mariongrinstead8459 2 жыл бұрын
@@RocketRoseArt Sorry Jeff, I can not find it. Keen to have a go on Monday with my glass buddy.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
@@mariongrinstead8459 Not a problem. This is the link. Have a look in the Downloads category and you'll find the file. rocketroseart.com/product-category/supplies/
@gwenpetersen5452
@gwenpetersen5452 2 жыл бұрын
Absolutely stunning! I would love to have the pattern. I don’t have a sandblaster, can you tell me why you needed to use it on this project? Thanks so much!
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Gwen. Partly because I had to coldwork the edges. When I do that I prefer to sandblast. Partly also because I often get devit on the second firing if I haven't worked the surface. I believe it's cumulative heat work. More time at the devit temp range.
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Gwen. Just want to let you know I've added a link to the description of this video, to an area on our website where you can download the file. Sorry, it's a bit contorted but was the best way of doing it. Let me know if any problems as the first time I've done this.
@Meredith3400
@Meredith3400 2 жыл бұрын
@@RocketRoseArt hi Jeff….really having trouble downloading; i get through everything except the last step; started by donating; didn’t get it; tried not donating; didn’t get it. Love, love, love your ideas!! Any thoughts on technology for me?
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
@@Meredith3400 Hi Meredith. I can see you have an account and have processed an order for the PDF. Have you tried logging in to your account and trying the download from there? You'll see a Downloads option there which will list the files. Click on the PDF of Project button. See how that goes and let me know.
@Meredith3400
@Meredith3400 2 жыл бұрын
Forgive my lack of understanding technology! How do I access the firing schedules and the pattern?
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Meredith. I've answered your comment in another area. Hope you have better luck this time.
@mimifowler886
@mimifowler886 2 жыл бұрын
Could you give it inches, too. Thanks so much
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Mimi. Converting all those measurements to inches accurately is a little difficult. The conversion is 1mm - 0.039 inches. This will give you a fractional value in inches that will be difficult to measure. For example, 10mm is 0.39 inches. or 30mm is 1.17 inches. Not sure how you would measure that. Sorry I can't be of more help.
@jimgreene4923
@jimgreene4923 2 жыл бұрын
How did you determine how long you wanted each piece of glass?
@RocketRoseArt
@RocketRoseArt 2 жыл бұрын
Hi Jim. The pattern has been worked out on a grid of 3 mm x 20 mm cells. 3 mm because of the glass thickness, and the strips will be laid on edge. If you download the PDF from my website (link in the description), you can get a copy. Because everything is, therefore, multiples of 20 mm it was just a matter of looking at the pattern, counting the number of grid cells to determine the lengths required of each colour. Hope that helps.
A Shocking Result with this Glass Fusing Project
15:05
Jeff Pritchard
Рет қаралды 1,9 М.
Adam Savage Makes an Old Book From Scratch
33:04
Adam Savage’s Tested
Рет қаралды 348 М.
НРАВИТСЯ ЭТОТ ФОРМАТ??
00:37
МЯТНАЯ ФАНТА
Рет қаралды 8 МЛН
Clown takes blame for missing candy 🍬🤣 #shorts
00:49
Yoeslan
Рет қаралды 45 МЛН
Amazing weight loss transformation !! 😱😱
00:24
Tibo InShape
Рет қаралды 63 МЛН
IQ Level: 10000
00:10
Younes Zarou
Рет қаралды 10 МЛН
Glass Weaving Demystified! Fused Glass Art Project Tutorial
16:05
Jeff Pritchard
Рет қаралды 11 М.
Fusing Secret Material in a Fused Glass Platter, Project Tutorial
13:44
Murrini channel dish and playing with a new strip cutter!
9:52
Jamaison Schuler, Fused Glass Artist
Рет қаралды 2,9 М.
The BEST Color Etching on Glass - Three Different Methods Tested!
28:24
Top Ten Mistakes to Avoid When Learning Stained Glass.
19:37
ARTyRV GLASS STUDIO
Рет қаралды 64 М.
Stack It! Fuse It! Love It? Glass Fusing Project Tutorial
14:49
Jeff Pritchard
Рет қаралды 5 М.
MAKING CLASSIC GOLD LEAF GLASS SIGN - ART ASMR
17:55
Glass Sign & Co.
Рет қаралды 2,3 МЛН
Самый ДОБРЫЙ мальчик!😎
1:00
Petr Savkin
Рет қаралды 6 МЛН
ToRung short film: 🐶puppy is hungry🥹
0:32
ToRung
Рет қаралды 18 МЛН