Fusion 360 Sweep (10 Things You Should Know) 2020

Рет қаралды 32,668

3 жыл бұрын

Fusion 360 Sweep Tutorial - Sweep is a powerful tool for creating all kinds of shapes. Complex curves, mitred corners, and more! Learn 10 things about sweep for better modeling in Fusion 360.
🎥Watch Next
Brand New User Series With Exercises bit.ly/brandnewuser
Quick Tips Series bit.ly/FusionQuickTips
23 Tips Beginners Should Learn bit.ly/Fusion23Tips
⚡Subscribe To Get The Latest Videos
bit.ly/SubscribeTechEspressoNow
Content Writeup
___________________________________________________________________
#Fusion360
#Fusion 360 Tutorial
___________________________________________________________________
DISCLAIMER
This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.

Пікірлер: 49

@TylerBeckofTECHESPRESSO 3 жыл бұрын

Using Fusion 360 To 3D Print Anyone???

@Arrowtake 3 жыл бұрын

Thats what I use for. Thanks for the yet another great tips on Sweeps

@TylerBeckofTECHESPRESSO 3 жыл бұрын

Nice. Which printer do you use?

@Markevans36301 3 жыл бұрын

Yup, lulzbot Taz 6. I mostly cnc or laser cut though.

@chrislyons5090 3 жыл бұрын

I do cnc (Joe's hybird 4x4) and an Artillery Sidewinder X1 for 3D printing. It's nice to use one software solution for different disciplines!

@avaviel 3 жыл бұрын

Sovol SV01. It's like a Prusa bred with an Ender 3, and has the good things of each.

@ALLMX_XD 24 күн бұрын

You're amazing, I'm learning a lot from you and a couple of books I bought, but when I'm stuck you're my salvation.

@Mortu1412 5 ай бұрын

Thank you, it was exactly what I was looking for. I tend to forget some specific Features because I don't use them so often - but then I need them and I remember it is possible but I don't know how anymore

@awmetrogolf 3 жыл бұрын

Great stuff. You should do a video using the loft command. To show the differences between loft and sweep

@TylerBeckofTECHESPRESSO 3 жыл бұрын

Noted! Thanks for the kind words.

@gearbear9441 2 жыл бұрын

That wood profile you did enlightened me! Like I could actually 3D print a picture frame lol. Actually never considered that! I love the videos, they've been super helpful with my transition from SW to F360 so keep'em coming! :)

@TylerBeckofTECHESPRESSO 2 жыл бұрын

Thanks!

@marcop-mb506 2 жыл бұрын

Great videos Tyler, keep it up. Subscribed!

@joaoneto1399 3 жыл бұрын

Great Video, many tips in a few minutes!

@alphaomegalives Жыл бұрын

Awesome Video - Needed this Thank You !!

@elijahcbr6009 3 жыл бұрын

That was awsome thanks.👊

@MOVIEKICKS 5 ай бұрын

Do you have a video sweeping on a non-planar solid Body made by thickening Splines?

@danballarin 2 жыл бұрын

Wow, thank you! Who are the 2 turds that gave this a thumbs down? I saw the cable rope, tried to think how to do it and decided it would be too complicated, then you solved it in 2 steps! Thanks for helping me understand this command!

@sethother8012 Жыл бұрын

You're great! Thanks!

@padmalayarawal3091 3 жыл бұрын

Really great ideas🤩

@daveanderson2316 11 ай бұрын

Excellent!

@danielstewart3507 2 жыл бұрын

Helpful!

@jeremy6384 Ай бұрын

Ive got a simple problem. I have a vertical flat surface and I put a circle at the top of the wall, and a circle at the bottom of the wall. I ran a nice arc from the center of each one and can sweep it but the ending is jagged. I just want this new tube to be flush to the wall at top and bottom on the ends where the tube meets the wall.

@teyrasiridae4704 3 жыл бұрын

Awesome video! Is there a reason not to just default to plane on path at the start point if you want to do a sweep? That seems to always be perpendicular

@TylerBeckofTECHESPRESSO 3 жыл бұрын

I think I showed the standard planes to keep it simple for beginners if that is what you are asking...can't think of reason not to do that! Great call

@JohnCHansen01 3 жыл бұрын

I found the plane along a path to produce a body that was most like what I was expecting to get from a sweep. I would enjoy seeing you do a comparison of the rope that you produced with the sweep and a rope produced by using plane along a path. This would illustrate the capabilities of both methods and why a designer would chose one over the other. [ I found the plane along a path to be a bit lacking and unable to be rotated. Is it possible to twist the body after it is extruded? Are there other strengths or weaknesses? ]

@TylerBeckofTECHESPRESSO 3 жыл бұрын

Will add it to the list.

@tomrice4890 3 жыл бұрын

Created a frame using profile and rectangular sketch as path. Worked well. However, how do I slice the frame at the corners to create four new components from this one component frame?

@bradnelson3595 5 ай бұрын

I believe that you could sketch a profile at each corner (to mark the location of a "splitting" plane) and use the Split Body command for each corner, doing this one at a time. After all the splitting (presumably doing so four times) you should end up with four bodies that you can then select individually and "Save as Mesh" to make each stl file for 3D printing. Good idea making a picture frame.

@matthill3986 Жыл бұрын

Can you sweep between a loft? If the geometry changes from one plane to another along a path?

@avaviel 3 жыл бұрын

Tip #11: You can also do 3d sketch sweeps. In the Fusion settings: General, Design, Allow 3d Sketching of lines and Splines. You can make your straight lines with control points, and attach a plane to the line as in tip #10. Then, you can select points in your control node and move them in 3d space. I went ahead and made a video! Not as high quality as yours, but I think it shows the point. kzfaq.info/get/bejne/bq9xiayd39TYoGw.html

@nouveauwebsitedesign1890 2 жыл бұрын

One problem I have is that my origin display disappears. It's checked in the display box and the eye is on, but it's not on. Makes it very difficult to choose my second plane. Any ideas?

@RenatoYamamoto481 3 жыл бұрын

nicee, what about the purple sweep?

@TylerBeckofTECHESPRESSO 3 жыл бұрын

That is the for sculpting...deserves its own video :)

@PanopticMotion 3 жыл бұрын

#7 you flew way too fast at the critical points of drawing each part on a different plane. I was trying to figure out what happened (what planes) at 0.10x speed, I couldn't :(