Fusion 360 Tutorial - How to get a handle on Assembly and Joints in Fusion

No video

Fusion 360 Tutorial - How to get a handle on Assembly and Joints in Fusion

Рет қаралды 308,375

Күн бұрын

It is time to dig in and get a handle on assembly and joints in Fusion 360. This video comes with three examples and you can download the models by clicking the link below.
Want to learn more about Fusion 360? Check out this link:
autode.sk/2bZypPp
Vise
a360.co/2e3GCBJ
Chuck
a360.co/2e3I333
Table Assembly
a360.co/2e3Jheu
Table
a360.co/2e3Hnea
Clamping set
a360.co/2e3GTV5
SUBSCRIBE!
www.youtube.com...
(The advice in my videos are my own and are not intended to represent the views of my wife, children or employer)
My email:
contact@larschristensen.org
Want to learn more about Fusion 360? Check out this link:
autode.sk/2rXApL2
Free CNC Handbook:
www.larschrist...
LET'S CONNECT:
/ lars_cadcam
/ mrlarschristensen
/ cadcamstuff
MY SITE:
www.larschrist...

Пікірлер: 736

@gusmanbhai 6 жыл бұрын

You're a natural teacher, thanks for these videos!

@cadcamstuff 6 жыл бұрын

You are so very welcome :-) Thank you for watching!

@BukephalosDE 7 жыл бұрын

Thanks Mr. Christensen, your HowTos are among the best HowTos on KZfaq. Keep Going.

@cadcamstuff 7 жыл бұрын

Thank you, Arne :-) Super happy you find it helpful.

@billmoran3812 4 жыл бұрын

Lars, you have by far, the best tutorials for Fusion 360. I search for your videos whenever I need to learn or refresh my knowledge.

@JuanRamirez-kt1se 7 жыл бұрын

Clear, concise, good voice tone and easy to listen to. I will look for your tutorials on Fusion, Tanks a lot.

@NeoMorphUK 7 жыл бұрын

Lars, for an old guy who watches the youngsters zip around Fusion with envy, I have to say you teach very, VERY well. I was not very hopeful at the beginning but I practiced making the Absolute Beginner tutorial box several times until I knew what I was doing... and I was hooked. So thank you Lars, and also to Autodesk for making it free for enthusiast use. Seems an old dog (me) can actually learn new tricks. Next hard point is actually to transfer a 3D model and make it on my cnc OX router ( that is coming next week). I'm doing this actually as therapy for long term chronic pain.

@cadcamstuff 7 жыл бұрын

You are so very welcome :-) Thank you for watching!

@jimaltmiller677 2 жыл бұрын

I really appreciated your videos. You are a lot easier to follow than any of the other instructors on KZfaq.

@stanmacdonald1073 3 жыл бұрын

I've retired from a SW background. A couple years ago I started using F360. I've been fighting joints since then. Your video finally sheds light in to what is going on in F360. Thank you!

@greghorowitz9992 7 жыл бұрын

Lars, your instructional videos are not only extremely helpful, but also the most enjoyable to watch. I only recently stumbled upon Fusion 360 and I have completely overdosed on fusion tutorials in the past 2 weeks. My subscriptions for SolidWorks and CamWorks are due end of November, and thanks to you and Fusion 360 I think I am going to bail on them after about 12-14 years of loyalty!! Thank you,

@cadcamstuff 7 жыл бұрын

Hi Greg, Thank you for taking the time to comment! Glad you find the videos helpful!! Have an awesome day!! Best, Lars

@benlee803 Ай бұрын

Still appreciating your fantastic videos. Thank you for all that you have done for the world of engineers. I always recommend your videos to every person wanting to add to their skills in the maker's community and beyond.

@mohammadhassan2235 Жыл бұрын

It's 2022 and still one of the best tutor on KZfaq! This a quite explanatory and simple. Thanks for such huge work.

@nevis4567 Жыл бұрын

Thanks to Lars, in 3 days I've gone from a primitive noob to: - Day 1: Firm grasp of sketching & solids - Day 2: Firm grasp of drawing - Day 3: Firm grasp of assembly Friggin thanks man. You're the best.

@MrFegro 7 жыл бұрын

Great work, Lars. It is giving me the tuition I could not otherwise afford. Thanks so much!

@cadcamstuff 7 жыл бұрын

Thank you for taking the time to watch and comment! Have an awesome day!

@mattbrown9496 6 жыл бұрын

I have never done CAD work before in my life, With around an hour and a half of video between you and NYCNC Im happy with my progress, excellent videos, very clear and easy to understand

@cadcamstuff 6 жыл бұрын

That is awesome to hear Matt Brown .Thank you for watching the videos. John creates the best videos!!

@MR6.5 7 жыл бұрын

Lars I live by these videos thank you so much! I am a self taught drawer with a home built CNC milling machine and I would never be abe to make parts without your videos!

@cadcamstuff 7 жыл бұрын

Thank you so much for watching the videos and take the time to comment! Really happy you find the content helpful. I'll keep it coming :-). Have an awesome day!

@jackflash6377 7 жыл бұрын

Absolutely one of your best videos and possibly the most informative video on Fusion I've seen. Thank you!

@terrencecox8184 5 жыл бұрын

Mr. Christensen , Thank you for your videos! Very detailed information. Sequence of operations is great. Summary at the end, very GOOD!! You put into the videos little tidbits that others don't, this includes AutoDesk. Please keep up the good work with these types of videos. I am making a telescope utilizing Fusion 360 and 3-D printing - all parts including course and fine focusing adjuster. I have about 30 hours working with Fusion 360. I have not had any formal training with any CAD systems. I am teaching myself. I should say, you are teaching me! LOL

@cadcamstuff 5 жыл бұрын

Thank you for watching! Happy you find the content useful👍😊

@woshou95 6 жыл бұрын

It's official you are Best teacher of FUSION 360 my man Lars Christensen !! Thanks

@cadcamstuff 6 жыл бұрын

That is awesome to hear Castelo Woshu .Thank you for watching the videos

@blainebrezina1210 7 жыл бұрын

I wish every creation software had tutorials as good as yours Lars. I really appreciate how slow you go and how you repeat every command you use multiple times and speak them out even when you are doing them for the 2nd or the 50th time and talk about the intention of each. It is extremely helpful.

@cadcamstuff 7 жыл бұрын

That is awesome to hear Blaine Brezina .Thank you for watching the videos

@ChrisHuck 7 жыл бұрын

Thanks for a great video. As someone that's been using 3D CAD for almost 20 years now, it's certainly hard to break the habits that have been developed in various software. Hearing your description of how typical mates are applied in say, SolidWorks (which I use daily), versus how they're applied in Fusion really helped me to wrap my brain around how to approach joints in Fusion. I was really struggling yesterday with an assembly and this video has given me a fresh perspective. Keep up the good work!

@cadcamstuff 7 жыл бұрын

Thank you, Chris. Really appreciate your comment. I understand your pain, being a past SolidWorks user myself. It takes awhile to get use to new ways of doing things :-) Hang in there. Have an awesome day! Best, Lars

@maxvandertol1747 7 жыл бұрын

Hi Lars, I'm brand new to Fusion 360, having used cambam in the past with my home build CNC machine. It's time to start making more complex items. I really enjoy your video's, they are great, well explained in a good speed, very understandible. Thanks!! More videos to watch.

@cadcamstuff 7 жыл бұрын

Thank you so much for taking the time to watch the videos and comment. Really happy that you find them helpful! I'll keep making them :-) Have a great day!

@JoaoCarvalho141252 4 жыл бұрын

Lars, hello! My name is João Carvalho. I am Portuguese In fact, I am starting with this program - Fusion 360. The program I used and still use is Inventor (in my case, the last version I installed the version / release 2020). So, I would like to thank you for this wonderful video. You were amazing with all your lessons / explanations / examples ...! Today I learned a lot from you, honestly. Congratulations on your performance. You are a true teacher in this matter, indeed. I really want to thank you for giving me this amazing lesson with Fusion 360. God bless you. My best regards from Portugal: João Carvalho.

@finbat 7 жыл бұрын

Thanks Lars. That is going to save me so many hours of frustration! Fantastic and concise explanation of why joints are so much more powerful than mates.

@cadcamstuff 7 жыл бұрын

Thank you for taking the time to watch the video and comment! Have an awesome day!

@MrFujack103 6 жыл бұрын

Why am I always thinking of questions while watching your videos and then you go and show the answer like 10 seconds later! Great videos 👍

@tonyshahedi5665 5 жыл бұрын

I've been programming Mastercam for past 25 years as all-axis programmer, but now i work for a company that they use Fusion 360°. Lars knowledge and his great attitude teaching online is the best i ever seen. Great software so far and I'm excited learning from Lars for sure. Thanks Lars!!!

@dottovich47 7 жыл бұрын

I greatly enjoy watching you because you go in depth and simplify things in a way that most will understand; which makes you greatly enjoyable to watch. I am not saying you are basic in what you show, but that you can break down complex (and very difficult for most) subjects and present them in such an apprehensive way. Please continue to be inspired to produce videos. -I Appreciate you!

@cadcamstuff 7 жыл бұрын

+thank you dylan ottovich

@HerbOMatic 7 жыл бұрын

Instruction is good! The Joints here are not nearly as intuitive as mates in Solidworks but looks faster once you know how to use it. I'm here learning Fusion since I was trained in solidworks but can't use it in my small business since it's 5-7K a seat. Fusion is accessible, thanks!

@stefanandreev7200 7 жыл бұрын

Thank you very much, Chris! I'm completely new to CAD (this is my 2-nd day) and your videos are extremely helpful for for me. I already manage to build by myself the detail from your lessons for beginners without watching them, as well as other different details. Now I start to learn a little more complicated things. Once again thank you very much for your time.

@cadcamstuff 7 жыл бұрын

Awesome work Stefan! Thank you for taking the time to comment

@heron5045 5 жыл бұрын

I was breaking my head on how to make the turning joint, u hinted me to the right direction, thank you :) Designing a hovercraft lift propeller :)

@YourStoryHomeDesign 4 жыл бұрын

Lars, Great explanation of how to assemble parts in Fusion 360. As a Pro/ENGINEER/SolidWorks user for over 20 years, I was so confused when I tried using F360. This was very helpful, thank you!

@francisnoonan2314 6 жыл бұрын

Only 12 minutes into the video... Already feel it deserves a huge THANK YOU, like a weight is lifted off my shoulders. I too come from many many years of rigid CAD background and tried several times to use Fusion360 at home. Every time I gave up. In addition to your tutorial, your comments on how we need to think differently and how this program uses a different methodology for assembling are incredibly helpful.

@cadcamstuff 6 жыл бұрын

That is awesome to hear Francis Noonan .Thank you for watching the videos

@ke9g 5 жыл бұрын

Lars, I always recommend your videos to my friends who are afraid to start learning something as powerful and complex as Fusion 360. Your easy going demeanor and paced explanations really help it sink in as we follow along in real time with our models. Please keep up the great work!

@JAMESHOPKINSIBXCNC 7 жыл бұрын

I learned how to do this by watching this video, thanks so much for taking the time to do this video.

@Moonlight0551 7 жыл бұрын

Thanks. Your video is very thorough, you are easy to understand and explain things well and I learned a lot.

@cadcamstuff 7 жыл бұрын

Thank you so much David. Have an awesome day!

@jamesmeyer7146 7 жыл бұрын

Best video on joint I have seen. I connected a lot of dots thanks to you.

@cadcamstuff 7 жыл бұрын

Thank you for taking the time to watch, James

@MatthewNichols 7 жыл бұрын

Lars you are my hero for the day!! Joints make so much more sense now! I really struggled because of coming from the old way of assembling in CAD packages

@cadcamstuff 7 жыл бұрын

Thank you Matt :-)

@timbering4824 7 жыл бұрын

Just getting to know Fusion 360 and glad I have begun by viewing these beginner videos. Thanks Lars. Very good work. Very professional and I cannot recommend anything more.

@cadcamstuff 7 жыл бұрын

Thank you Tim, Really appreciate your comment! Have an awesome day! Best, Lars

@timbering4824 7 жыл бұрын

Hey Lars. Do you anything about Inventor as a CAD package? I am trying out Fusion but I see Inventor is similar. I am trying to see what the differences are and determine which is the best package for me. I used AutoCAD years ago when I worked for a company but now I am on my own and cost is an issue so Fusion seems like a great package so far. Hope you don't mind me asking . thanks.

@3dmpcad785 7 жыл бұрын

Hi Lars, your lessons are clear and to the point. Thanks

@cadcamstuff 7 жыл бұрын

Thank you so much :-) Have a great day!

@maxphotos 7 жыл бұрын

Hi Lars, Thanks for this great video. I learned more on this one than on all the others video found !

@cadcamstuff 7 жыл бұрын

Thank you for watching, Max. Glad you found it helpful. Have an awesome day!

@geoffwheeler9308 6 жыл бұрын

Hi Larsen. I would like to thank you for your presentations in all the tutorials I have watched, they are clear and detailed for me to understand and the pace is slow enough for an old over the hill person like me (I am 85 years young in March), this is so refreshing in these days of speed, I only wish your approach would rub off on other presenters out there. Another important note is the quality of the video especially the sound track which is superb, thanks again Larsen, Geoff Wheeler.

@cadcamstuff 6 жыл бұрын

That is awesome to hear Geoff Wheeler .Thank you for watching the videos

@RonVan1XP69 7 жыл бұрын

So simple when you explain it well, as you did, has helped a lot, keep the videos coming they are really helpful.

@ScottMoyse 7 жыл бұрын

Ron Cummings he's paid to. So I'm sure they will ;-)

@cadcamstuff 7 жыл бұрын

Thank you, Ron!, Really appreciate you are taking the time to comment! Have a fantastic day!

@tomswift2x Жыл бұрын

I only need a joint every six months or so, so I've watched this video twice per year, every year. Thanks Lars.

@ridni2388 Жыл бұрын

I came here to write that... :D

@jorgevillatoro2009 3 жыл бұрын

Lars, you really are a great teacher is evident your experience, but most of all the passion that you put in your work, I really appreciate, the patient and the generosity of share all your knowledge and your time, you really are one of the kind I relatively new in fusion and inventor, and I became your follower, Thank you very much

@cadcamstuff 3 жыл бұрын

Thank you for the kind words, and for watching!

@welnamarcin 7 жыл бұрын

Lars you have made great job. I was waching it with plesure. Well done !

@maheshmulik2399 3 жыл бұрын

Thank you, sir, it's an excellent tutorial, clear voice, clear words, and teaching the stuff at an excellent pace. Thank you for the video, your channel has been extremely helpful for my Fusion 360 journey.

@shadowmanxyz7805 5 жыл бұрын

I had no idea about rigid grouping. I always went back and moved everything back to what I moved This changes everything! 🙏 Thank you!

@cadcamstuff 5 жыл бұрын

You are so very welcome 👍😊

@heitorlipsky7512 4 жыл бұрын

Lars, you cover a lot of ground very didactically - Have been a pleasure learning with your videos about Fusion. Keep the great job up

@KLPerformance1 6 жыл бұрын

Great Video!! Being a 20 year Catia guy the mindset change would have been VERY difficult without your guidance! I also love videos like yours that talk you thru the steps. Cant stand the click only ones....Keep up the great work!!

@cadcamstuff 6 жыл бұрын

That is awesome to hear Kevin Pennau .Thank you for watching the videos

@ej-1608 6 жыл бұрын

Same! I use NX10 and the mindset is so different when constraining parts together.

@3DMetalParts 7 жыл бұрын

Thanks Lars! Coming from years of SolidWorks, this video really helped me to understand Joints.

@cadcamstuff 7 жыл бұрын

That is awesome to hear Chas. Colburn .Thank you for watching the videos

@matthewgips7694 7 жыл бұрын

Lars, your videos are excellent! Coming from SolidWorks experience, I was confused about Fusion 360 joints. This video made me feel extremely comfortable with them.

@cadcamstuff 7 жыл бұрын

Thank you for watching, Matthew! Very happy you found it helpful. Have an awesome day!

@shubhamharale6086 5 жыл бұрын

It took only 2 days to learn fusion 360. Thanks to you. Really appreciate your work your videos. Thank you vrryvery very very much for these videos.

@cadcamstuff 5 жыл бұрын

You are so very welcome👍 Thank you for watching 😊

@josenandorossipr 7 жыл бұрын

Excellent tutorial... A lot of detail on how the program thinks.

@psymantis1 7 жыл бұрын

Great tutorials Lars. Exactly what I need for learning Fusion 360.

@ascregattas4021 2 жыл бұрын

Excellent tutorial. Well paced. Deliberate where it needs to be. No nuance lost in the demonstration and explanation. One of the few channels I am subscribing to.

@dagtheaviator 7 жыл бұрын

Spot on the best place to come to if you are a novice in Fusion 360.

@jonboy5yo 7 жыл бұрын

Awesome! I also have been wanting the toe clamp kit...

@hanskaraski1462 7 жыл бұрын

Dear Lars, you did great Jobs - I think your tutorials belong to number 1 of the hitparade - thx - thx- thx

@cadcamstuff 7 жыл бұрын

Thank you so much, Hans :-)

@garyedgerton5388 5 жыл бұрын

Very clear instruction with summary reviews. I have not yet found Lars' menu of all his videos.

@bradboyce9631 2 жыл бұрын

You're a great teacher. Love you teaching style. Always learn a lot from your videos.

@dennismckee6162 2 жыл бұрын

Lars, this is awesome man. I've been using parametric CAD for 21 years and the joint system here just blows me away.

@northernstar450 7 жыл бұрын

your explanations are so clear and patient thanks!

@miniworld3d 5 жыл бұрын

Very helpful Lars, the way you reiterate each step really sinks in and it doesn't seem repetitive. It is indeed hard coming from other CAD programs to think "backwards" and go for the final position instead of trying to reduce degrees of freedom one at a time. Thank you!

@inderjeetsingh9808 6 жыл бұрын

Amazing work done sir! Just watched the video to clear a doubt or two, got to learned a whole lotta new stuff too! Thank a lot.

@mussiehabtegaber1937 7 жыл бұрын

Absolutely helpful and informative ,and Please keep doing the good things that you are doing now ,Many thanks

@Jzrancher 5 жыл бұрын

Thank you for making these videos! I watched the beginner series, with no CAD experience at all. I feel like I have a MUCH better understanding. Keep up the great work!

@cadcamstuff 5 жыл бұрын

Awesome to hear. Thank you for watching 👍😊

@todddesiato9762 5 жыл бұрын

Finally! A 3D modeling program that runs stable on a MacBook! Fusion 360! It hasn't crashed yet. (knock on wood) I've been waiting years for this. AutoCAD 2018 won't even get past the start up screen before I get the spinning beachball of death, "AutoCAD Not Responding". Thank you!

@ke9g 5 жыл бұрын

I've been running F360 on a MacBook 13 for a year now and absolutely LOVE it. The only gripe I have is that it saves all your models in the cloud and not on your computer. I think it is a small price to pay for such a great quality program that I can use for free on my hobbies. Lars is also absolutely terrific. I sometimes watch others but always come back to Lars for a calm, clear, very detailed explanation of how to use F360.

@sammeyerson1577 7 жыл бұрын

absolutely helpful and informative. Very simple and well done

@cadcamstuff 7 жыл бұрын

Thank you, Sam! Glad you found it helpful!

@chanmoua 3 жыл бұрын

I love you. Thank you for actually explaining this program for us unlucky ones who don't have access to solidworks

@CPit101 2 жыл бұрын

Hi Lars. I looked at the movement of the chuck in detail and noticed that the chuck moves the opposite way that it should. Also, the grooves in the jaws did not line up with the spindle underneath them. I was able to fix those things. I also adjusted the speed on the lower pinions, so they match the rotation of the spindle. Looks awesome now. Even though you did not show how to do these things, your tutorial inspired me to learn how to adjust and fix the model up. Thank you for the guidance!

@cadcamstuff 2 жыл бұрын

Awesome! Good work!!

@danielschroeder3709 5 жыл бұрын

Great video Lars! I am a total novice, but your explanations are very clear and easy to understand! Thanks

@aswincp09 7 жыл бұрын

The video is very informative. Thank you so much.

@vccuong1 7 жыл бұрын

This is extremely helpful. Thank you very much, Lars.

@TRMPyro 7 жыл бұрын

Great videos, have watched several now, very helpful for this new to Fusion 360 user, but longtime Autocad user. I actually didn't notice the music until I read a comment about it. Keep up the great work.

@cadcamstuff 7 жыл бұрын

Thank you for taking the time to watch the videos and comment. Happy you found it helpful. Have an awesome day! Best, Lars

@erikcmetz 7 жыл бұрын

Thanks so much. Really clears up the options and techniques to add joints.

@cadcamstuff 7 жыл бұрын

Thank you Erik. Glad you liked it! Best, Lars

@bobsamuel1567 5 жыл бұрын

Hi Lars, Your videos have keep using Fusion 360, thank you. Your intelligent, straight forward, energetic and often humorous lessons are excellent. BTW, I hope they pay you in some way and/or give you high praise, you certainly earn them. Thanks again!!! :-)

@francispoelmans6620 4 ай бұрын

Very useful, thank you. Great explaination! Thank you!

@cadcamstuff 4 ай бұрын

Glad it was helpful!

@sennabullet 5 жыл бұрын

You are the best Lars! Really helped me to ramp up my abilities with F360.

@cadcamstuff 5 жыл бұрын

Awesome!! 👍😊

@jiangxu3895 3 жыл бұрын

Very informative tutorial and I like the way and the rythm you make everthing clear.

@adamgeiger4990 7 жыл бұрын

Very Clear, Well Done.

@MsUag 7 жыл бұрын

Great Video. Explained every bit with perfection :)

@ignaciot 7 жыл бұрын

Very helpful, it was the video I needed at this point. Got here by NYC CNC recommendation. Thanks!

@cadcamstuff 7 жыл бұрын

Thank you! John Saunders does amazing work on NYC CNC. Big fan of him!

@matthewcarrellful 4 жыл бұрын

Wow Lars so kind of you to share the files so we can follow along side you. Thanks for the video

@44mod 7 жыл бұрын

Another great video. I had a little trouble with setting the T holder in place. It did not look right to me or flat to the grove of the table. I tried to change the angle from 270 to 265 Deg. everything looked great. Then when i made my joint, bolt to vice i was getting a error. I had slider selected, then I remembered what I had done with the angle and changed back to 270 Deg and everything went perfect after that. Thanks Lars for taking the time to make these videos!

@cadcamstuff 7 жыл бұрын

Thank you for taking the time to watch and comment! Have an awesome day! Best, Lars

@otto-Z 7 жыл бұрын

By far the best video on youtube covering joints in Fusion 360.

@danielh1989 4 жыл бұрын

Thank you so much for this video. For me as someone not very familiar with Fusion, it was incredibly helpful. Thanks!

@jhur77 5 жыл бұрын

Oh Lars, Please don't start using background music! Your lessons are so great, they don't need any bells or whistles! that loop gets old and is very distracting. The tutorial is very informative though, so thanks!

@salvadorebertolone 5 жыл бұрын

I prefer the background noise.

@davekramer7272 7 жыл бұрын

Thanks Lars. Great video that helps a lot. (I spoke with you at IMTS about this and just now watched it). Thanks again.

@cadcamstuff 7 жыл бұрын

Thank you for planting the seed :-) Have an awesome day!

@Alexelliste 5 жыл бұрын

Thank you lars ! You are my CADhero

@76Raby 7 жыл бұрын

I was also thinking the other way around about those degrees of freedom. Now I understand why I failed all the time. Thank you a lot for this video.

@cadcamstuff 7 жыл бұрын

Yes, same here :-)

@robindriscoll 7 жыл бұрын

Your tutorials are really wonderful! I have a small shop using a Haas Mini MIll 2 and I am in the middle of transitioning over to Fusion 360.

@cadcamstuff 7 жыл бұрын

Awesome! I used to run a Haas MiniMill. That was my little work horse for sure when it came to small parts run. Have a great day!

@angelofraietta3156 5 жыл бұрын

This is extremely good. This is going to make my job so much easier designing what I need to make. I wished I watched this a few days ago

@tylerking5703 3 жыл бұрын

my favorite tutor for fusion by far. thanks for all the help.

@robindriscoll 7 жыл бұрын

thanks. sorry I asked twice. I didn't see my first post and thought I didn't get it posted correctly. My assembly in question won't be machined together as an assembly. It is a bracket assembly made of three individual simple components. I was curious of best practice. It sounds like I should save each part out into a separate file then use CAM. I really enjoy your presentations. You are a great teacher!

@cadcamstuff 7 жыл бұрын

Thank you Robert. KZfaq has been acting up in regards comments for me also. Think it is on their end. Glad you find the videos helpful! Have a great day!

@philbx1 7 жыл бұрын

Great explanations again Lars. Very much appreciated!

@cadcamstuff 7 жыл бұрын

Thank you Phil. Really appreciate your feedback. Have a great weekend!

@stephenfitzgerald8488 7 жыл бұрын

Big thumbs up! Very helpful video

@whiteinnovationsvids 7 жыл бұрын

That was the ticket to my next ride. Thanks for the post, it gave me great insight.

@tonedizzle6289 7 жыл бұрын

This was so good, really appreciate you putting it together!

@cadcamstuff 7 жыл бұрын

Thank you Tony!

@markgraves2216 6 жыл бұрын

Nice step-by-step instruction for a beginner. Thanks Lars!

@cadcamstuff 6 жыл бұрын

Thank you Mark Graves

@ricardobrovida1155 7 жыл бұрын

Thank yo Lars, very helpful tutorial!!!. Regards from Argentina.

@dog3y3 4 жыл бұрын

This is awesome Lars. I really appreciate the helpful tips. I was getting sooo lost trying to manipulate my models. My supervisor will be impressed too.

@massarata 7 жыл бұрын

Many thanks for all your helps to us beginners

@cadcamstuff 7 жыл бұрын

Thank you for taking the time to watch the videos!! Have a great day!

@TheDAE 4 жыл бұрын

Love the video, your videos have been super helpful! I have no CAD background but love exploring Fusion 360 and your videos have helped me take me skills to the next level!