Fusion Rotary Wrap Toolpath - 4Th Axis Milling

Рет қаралды 87,138

Күн бұрын

This tutorial video is about the 4th axis Wrap Toolpath option in 2D Adaptive, 2D Pocket and 2D Contour. These paths are available in Autodesk's Fusion 360 Ultimate CAM software. We start by creating an overview of the Wrap Toolpath and quickly cover a variety of options.

Пікірлер: 42

@matthewbarnes472 5 жыл бұрын

Really useful video! Great explanations and still extremely relevant. Most people don't realize how valuable a 4th axis rotary can be on a 3 axis mill with the right cam

@davidholguin6243 5 жыл бұрын

Very Cool Mike. I’m not there yet and will probably never be required to preform this very complicated & professional task. But had to watch. Thanks, Sgt. Dave

@davidburdett5208 2 жыл бұрын

Great video. A machine simulation would be a great add on, although I respect keeping these videos short. Thanks.

@glindquist5635 4 жыл бұрын

Thank you very much, extremely helpful!

@leandroarias7259 4 жыл бұрын

Realmente el mejor tutorial !!!! Thanks You!!!!👏👏👏👏

@MakerMike-bx5ms 2 жыл бұрын

Wow! Great info!!!

@TheHalloweenmasks 5 ай бұрын

A very good tutorial

@user-vp3rz3pm3p 6 жыл бұрын

Hello. could not make a video of how you made the screw groove. and how to work on the lathe-milling machine.

@kiwidude8931 5 жыл бұрын

How do you do the chamfering please

@StevenCookFX 4 жыл бұрын

Mike : Just watched the video and can you help me figure out how to do a gear that is a spur gear with an extended smaller cylinder piece. I used the gear tool to create the part then recreated it in the correct XYZ origin to the main origin. Is there a way to figure this out?

@CvT_Custom_Cues 4 жыл бұрын

is there any way to make the Z axis zero on the surface rather than the origin?

@Avalyahful 3 жыл бұрын

Hey, in 9:37 you select the whole contour and it generates a toolpath. However, when I do that, Fusion says that it cannot unwrap cyclical geometry. How could you select a closed contour? Does it no longer work?

@cannondillon319 3 жыл бұрын

Could anyone suggest a way to model the notch at 8:30 in Fusion 360?

@JarppaGuru 7 жыл бұрын

this propably work on mill where y axis can move, but how this done on 4-axis lathe where is no y motion. i can use g7.1 i not need cam do millions lines of code,but outer diameter and inside diameter of those pockets have to be difrent. to get straight edge on centre line. will cam generate it for 4 axis lathe like that? i know surface on that cylinder tool path can be calculate by head measures are in drawing haha ,but already after 0.0001 step down thats have to be smaller path in c-axis of course z axis is same :)

@sleddarcheddar 7 жыл бұрын

What 4th axis do you have on your lathe? If no y, isn't it just x z and c?

@13anomalous16 4 жыл бұрын

now I need to figure out how to make the model

@engomarelkelany2687 4 жыл бұрын

Please (link for download. Fusion 360.

@MarcusWolschon 7 жыл бұрын

What if the pocket is deep enough that the chipload at the bottom is much different from the chipload at the top because it's closer to the center of rotation?

@nickscacchetti8401 7 жыл бұрын

i dont think it will matter 2 reasons. 1: the tool is spinning (very fast btw) having a very uniform chip load across the tool. 2: when machining in 4 and 5 axis 99% of the time you will be machining in a mode call inverse time/feed. i believe it is a G93 google its very interesting.

@MarcusWolschon 7 жыл бұрын

Speed is part of the machine control software. But I'm talking about parallel toolpath distances. I have that same problem with my CAM. Models made in materials that easily melt and having parts at radius 60mm as well as radius 0mm at the tip or -15mm in asymmetric parts. When an initial d=1/5*tool_diameter becomes an effective d=1/20*tool_diameter you are rubbing and thus mishandling your tools and your material melts or catches fire.

@nickscacchetti8401 7 жыл бұрын

sorry i just dont understand... i would have to actually see what your talking about. wish i could help

@jacobmacon2156 5 жыл бұрын

How do you machine a 3D object like a toy car, on the A-axis using A rotation?

@matthewbarnes472 5 жыл бұрын

You'd probably want to use the flow toolpath with limit fourth axis turned on. Flow is a great 3 or 5 axis simultaneous path for surface countouring that keeps the tool normal to the surface at all times. It's useful for gaining tool clearance in tight models. But in order to get the fourth axis limit to appear, you'll need to turn on the beta mode of the cam side of fusion. To do that, go to the top right menu and select the view tab from the file menu, then turn on the command line. Then type cam.betamode/on after you do that, the forth axis limit for flow will be available to use

@sergiojimenez3445 7 жыл бұрын

i have a warning, can you help me?, I have been trying to programming a wrpa helix, buy there appears "empty toolpath."

@MrAbeAllen 7 жыл бұрын

sergio jimenez I don't know for sure but that happens to me when my parameters are not correct. Like if the height and depth I'm cutting don't actually interact with the model. Or if my "setup" isn't quite correct. You've probably solved it by now right? ;-)

@UmarAkbar-nv2tx Жыл бұрын

where we get this model ?

@juniorcruz9070 2 жыл бұрын

DO YOU JAVE THE CAD FILE SO I CAM PRACTICE IT, PLEASE?

@alessandropolicarpo 7 жыл бұрын

Why not do this with turning function?

@nickscacchetti8401 7 жыл бұрын

if people dont have live tooling lathes, they must use a 4 axis mill

@tamimvahedy921 4 жыл бұрын

Thanks for the videos you made i want to work on the four-axis PowerMail. Can you make this video ???????

@zaknefain100 3 жыл бұрын

Use FedEx instead.

@outkast187 5 жыл бұрын

You selected upper line when it was supposed to be lower. Your toolpath was wrong.

@Xezma 2 жыл бұрын

I wanted to see simulation

@skillup323 4 жыл бұрын

Software name names please ❤️

@NapalmHv 4 жыл бұрын

fusion 360

@madaxe79 2 жыл бұрын

This does not work for me...

@mscncjj1582 5 жыл бұрын

One more choice of benchtop 5 Axis CNC machine for hobby: kzfaq.info/get/bejne/obSiith9vrGogmw.html

@MrZhefish 2 жыл бұрын

unfortunately, this also has been monetized, so a homegamer can't use that strategy anymore.

@dustinnelson7119 2 жыл бұрын

This is still available.

@MrZhefish 2 жыл бұрын

@@dustinnelson7119 Wrap Toolpath has this blue icon where it used to be a checkbox that upon clicking goes "Available with a Fusion 360 Paid Subscription" as in Fusion 360 2.0.12160 - Active Plan: Fusion 360 Personal. Personal: Individuals with non-commercial personal design projects. Individuals doing home-based non-commercial manufacturing and fabrication. If you got the education one or any of the paid, of course it's there. that will run you $495 a year, or if its only for a month 60$ happy to listen to your advice how to get it anyway without breaking the law or other shenanigans :-) oh, and btw. now i have to make the projects i am working on "read only" and "editable", and you can only have a few "editable". that also changed, as well as the very slow positioning speed and other things that makes a 20min job on a very slow machine, even more tedious.