Fusion Turbo! - VS4-10 Fordyce Budget Build

Fusion Turbo! - VS4-10 Fordyce Budget Build - Ep4

Рет қаралды 10,829

Күн бұрын

This season of the Budget Build-Off, Matt from the @scalebuildersguild and myself will be upgrading the Vanquish VS4-10 Fordyce RTR! Follow along for the next 8 weeks as we transform these vehicles into custom machines!
Budget Calcs:
Week 2 Remainder +$11.19
Week 3 Budget +$60
Foams -$41.98
Balance +$29.21
Week 3 Remainder +$29.21
Week 4 Budget +$60
Hot Wheels $10
Fusion SE $69.99
Pinion $7.99
Turbo $.99
Balance +$.24
Matt's Week 4: • DIY Bumpers with a Twi...
Week 4 Links:
Turbo Files: Coming in a day or two!
Fusion SE 1800 KV: bit.ly/46D81kj
Fusion SE 1200 KV: bit.ly/46s9eeg
Week 3 Links:
Dual Stage Foams: www.vanquishproducts.com/vts-...
Dewalt Gyro: amzn.to/3teYDVk
Tool Tips: bit.ly/3Zw7deG
Week 2 Parts
M4 All Thread: amzn.to/3Zp7tMo
Tubing: amzn.to/3Lt0Anz
Mesh: amzn.to/45Y111o
LED's: amzn.to/3t0PorQ
Grill Stamp STL: harleydesigns.com/store/vanqu...
Link Tool: www.teamgaragehack.com/collec...
Week 1 Parts
Brass 0.8" Rings: www.vanquishproducts.com/1-9-...
Aluminum VFD Posts: www.vanquishproducts.com/vfd-...
LS3 Engine: harleydesigns.com/store/ls3-l...

Пікірлер: 58

@powcar91 9 ай бұрын

My dad had a 86 Nissan maxima wagon. I drove it in high school, seeing it as a hot wheels. Is something I would never thought would happen.

@DeadnCold 9 ай бұрын

I love it! Instead of overdriving the front axle with gearing, I dare you to just put taller tires on the front and smaller ones on the rear the same as a FWD dragster. I'm sure it would kill any actual performance but it would be fun.

@joshuagregg7579 9 ай бұрын

It’s always crazy to me that someone could have such fabrication talent, and suck so bad at painting! 😂 His engineering skills and fabrication blow me away!

@rcstories_ca 9 ай бұрын

Josh needs to treat painting like fabrication. Vinyl cut masks and 3D print some jigs and then he’ll get some good results. Ah, who am I kidding. 😜

@rcstories_ca 9 ай бұрын

I have no problem with seeing more Hot Wheels on the channel.

@scalebuildersguild 9 ай бұрын

I guess we can call that "painting". But only just. Looks great my dude.

@jerryvolpini7987 9 ай бұрын

Cool idea, looking good (I wont mention paint 😉)! I prefer liquid mask, just brush on a few coats then trim along the seam lines (cover the rest of the body with tape, as usual). Gives you cleaner, more precise lines with no runs! There is the drying time though! And not scuffing the body, hmmm................? Enjoying this build, never know what to expect with you two (and the wheel, of course) 👍

@PurebloodedPatriot 9 ай бұрын

You almost lost me when you said you go to target. But I'll let it go since you watch Cleeter also. Hell yeah, Brother!

@BlindGuyRc 9 ай бұрын

Well I'm downloading that set up, and paying.. haha. That's awesome. Great job. Looks great. The white hood is very cool. I like your plan. 😎👍👍

@postalacidity 9 ай бұрын

Excited to see how that turbo light turns out.

@Hunkaluv75 9 ай бұрын

Hemistorm will take some notes on your skill with this hood paint :)

@bucksrcworld8119 9 ай бұрын

throttle for the led will look killer when you get that programmed!

@ryanmiller8823 9 ай бұрын

Hell yeah brother! When are you building a Leroy RC?? I want a full build series. Welding/brazing/fab, STL Sunday, test and tune. UDR based for the solid rear axle? IFS crawler for a mayhem style, but done over longer timeframe like an old budget build series (vaterra ascender/wraith KC house old school budget build) and at the end, go to Bradenton and send it down the strip.

@theclaxton 9 ай бұрын

Vanquish might need to do a special run of Advan wheels

@fallencrawlerrc4587 9 ай бұрын

For the hood if you have some small runs around the edges you can do some black trim tape and line it to hide those runs then it would show “body lines” for the hood

@henryurbina2555 9 ай бұрын

Nice!!! That was a good idea. I mean I would have painted the hood a little better but….. 😂

@HydraMainframe66 9 ай бұрын

Hey Harley I can not wait to see and meet you at RC Excitement in Fitchburg MA on Oct 14th

@westdesertwheeler2666 9 ай бұрын

I like the hot wheels inspiration 👍

@brianmassey7563 9 ай бұрын

love the build series. Every time I hear Fordyce I think of the skin disorder. Yellow wheels and a cab spoiler!

@thomasbialzik3060 9 ай бұрын

Cool turbo setup. Sinking it into the hood was a good call. The white paint looks good on camera. See you on Wednesday night takeover!❤

@saturnfivehynrgrc581 9 ай бұрын

Turbocharging applied, love it! Like button energized.

@smokeysrc 9 ай бұрын

Gold wheels and brass links and I love the turbo with the light that's really creative 🤘💯I like this week lol

@vintagerc9173 9 ай бұрын

Vanquish Products should make some officially licensed 1.9 “ HOTWHEELS “

@SWAYIN66 9 ай бұрын

“Let’s not get into how bad my paint is”. Classic Josh! Hahahah 🤣

@JThelen1031 9 ай бұрын

Definitely looks good. Can't wait to see what's on the other side of the break!

@Ginga_Ninja_RC 9 ай бұрын

Definitely add an engine sound simulator with the turbo blow off sound! Cherry on top.

@jamisonsenitz2528 9 ай бұрын

Right on man!!!! I'm always a sucker for a good ol civic hot wheels. Way to work it into the Fordyce.

@ssamssamssamsson 9 ай бұрын

Matt please send Josh some Tamiya lexan paint remover 😂

@my89foxbody1 9 ай бұрын

Tell Matt I'm still looking for my stickers!

@madmikecustomrcrockcrawlers 9 ай бұрын

We all are still waiting for our stickers to show up from ol' sticky hands Matt.

@navigationmanship 9 ай бұрын

Looking very good with white hood and turbo!! Looking forward to next spin!! Good luck!!

@longtalltexanrc3358 9 ай бұрын

Adding a flasher to your LED would be another cool option to simulate the flames coming out. Nice upgrades on the build

@HarleyDesignsInc 9 ай бұрын

I may be able to figure that out too. I plan to do it with Arduino.

@longtalltexanrc3358 9 ай бұрын

@@HarleyDesignsInc that’s a skill I haven’t tapped into year so I’ll be looking out for it. I’d like to add flashers in an upcoming hot rod build and that could be the golden ticket.

@17madracki17 9 ай бұрын

Good week. ! I just bought a fusion pro last week without even knowing there was an se. 🤑So thanks for the info I think when it comes time to upgrade the sons truck I'll have to check the se out. Once this couple new element Enduro's are worn out. We're going to try the For Dyce. They look very well built

@kingkooper7522 9 ай бұрын

Hey josh. Like the white bonnet...but it looks too neat. Think you need to scuff some wear marks on edges of raised area and front near grill...some up streaks. Add some chrome paint to current through exhaust and some blued type heat marks until print in transulucent material. Defo do wheels in that colour. Possibly should cut bonnet out and make it raisable on printed hinges...would alkow to neaten painted areas around edge of bonnet...fasten bonnet with bonnet latches agaun possibly 3d printed or bought if made. Add some addition wear and realism by given body a bent in area maybe wheel arch and chrome marker area then rust streaks in area to age. Age the sprayed wheels after done. Possibly cut drivers window out add 3d print interior and find a driver figure... rugged dude action figure like arnie from predator or summin. Add some graphics....like fusion...hot wheels....kmc....etc onto body maybe even colour coded to wheel colour? Few ideas for ya. I love these builds. Peace.... Hope u do read comments for ideas.

@lypheEddie 9 ай бұрын

I agree with the wing idea, but maybe not a huge one. More so like a fin

@roadhog29389 9 ай бұрын

Giant rear wing as a rear cover would be something

@HarleyDesignsInc 9 ай бұрын

I’ll be doing a bed treatment, but no wing as I’d be worried about breaking it easily!

@derekhell666 20 күн бұрын

I purchased the 3D files for the Turbo but it didn't come with the body cutting template.

@adelfogutierrez317 7 ай бұрын

hey josh just a quick question where can i find the files to print the hood cut out jig? thanks awsome design.

@nicholasstephey8475 9 ай бұрын

Not so sure about that hood

@christopherwiltse312 7 ай бұрын

My file didn’t come with the template to mark the hole for the turbo just the bracket that sits on the grill

@eerickson187 4 ай бұрын

What size screws are needed for the turbo?

@WoolstyRC 9 ай бұрын

You should of copied to honda City turbo it would of made tomleyrc happy 😊

@marklarsen-ne2ws 9 ай бұрын

How's the 1200kv se speed wise with 14t pinion

@Sysiphos 9 ай бұрын

Front corners of the cut up wheel arches bother me, but I've no idea what to do to them

@HarleyDesignsInc 9 ай бұрын

I have a plan for some filler right there.

@VermontScaleCustoms 9 ай бұрын

Was that the second or third blade from that 5 pack that you've had for x-number of years? I feel like it's the third for some reason. Amirite?

@williamcoston4355 9 ай бұрын

Please tell me you’re going to sell that STL file!

@HarleyDesignsInc 9 ай бұрын

Yes, I’ll have it up tonight or tomorrow.

@JRLawson1234 9 ай бұрын

You need to change the bankruptcy spin to an extra hundred dollars spin. Just saying. It stresses me out every week to see the possibility of money being taken away.

@adventurefixn 9 ай бұрын

4x hot wheels are $10 these days? 🥴

@HarleyDesignsInc 9 ай бұрын

Some of them are $30 each 😂 but I bought more also which is a different story.

@MrSmith223 9 ай бұрын

all due respect, that looks awful.

@toysforboysrc 9 ай бұрын

@1:30 the “window hood” on the Hotwheels car.. You might like the window hood I did with my Skyline build! It also has an engine bay and resin printed R34 engine! kzfaq.info/get/bejne/fZ-Pf7Cfta-1l6M.htmlsi=Y-Kfoy6GdPr37RDn Since it’s topic related I’ll share my video post here because sharing is caring🙏🫵..

@toysforboysrc 9 ай бұрын

Also thank you for allowing us to share our ideas and suggestions in regards to your Fordyce rc project! With all the printing capabilities you possess it would be great to see some ideas applied to your project! Thx again can’t wait to see where your project goes😁