Fusion360 Assembly Tutorial; Full practical assembly from scratch

Рет қаралды 102,575

Күн бұрын

Today we'll create a full assembly from scratch, how to set up (sub)components, different joint techniques, appearances, motion links, joint limits, rigid groups, contact sets, and much more.
You can find more about project PolyVent here: covid-eic.easme-web.eu/soluti...
See more of my work here:
Instagram: / creo_nova
Website: www.creonova.nl/
Topics covered:
0:00 Introduction
1:10 Start with new component
4:16 Second component: steel rod
5:13 Ground and first joint
6:19 More rods: copy-paste
7:44 Set screw pockets
12:05 Copy-paste-new
13:06 Going back on component's timeline
14:28 Changing rod length
15:29 Appearances
17:11 Insert McMaster-Carr component
18:53 Modelling leadscrew
20:26 As-built joint
21:06 Shaft Collar Subcomponents
22:02 Joining to sketches
24:39 Body to component conversion
26:01 Part in separate file
27:42 Fusion360 vs Inventor/Solidworks/etc.
29:05 Isolate and hide components
30:02 Motor bracket modelling cont.
35:58 Jointing motor bracket
38:20 Modelling follower
41:52 Objects to cut and visibility
42:59 Components pattern + rigid group
43:58 Interference analysis
44:41 Sliding as-built joint
46:17 Contact sets
47:15 Motion limits
48:48 Motion linking revolute-slider
50:56 Linking joints with more joints

Пікірлер: 249

@deeeeeds 2 жыл бұрын

This is one of the best Fusion videos I've ever seen. Most tutorials are just designing parts where the dimensions are known and are a single part. This was a great "building around real parts" demonstrations. Plus, very nice to see the full workflow.

@antalz 2 жыл бұрын

Thanks a lot, that was a big part of what I was aiming for, glad to hear I succeeded in that aspect.

@tugric 2 жыл бұрын

Totally agree! Thank you for awesome tutorial)

@YummyYummster 2 жыл бұрын

Real world example! Loved it, saved it and will rewatch it. Thank you a lot

@Good13man 11 ай бұрын

I was thinking the same thing.

@cmgeolo 6 ай бұрын

I agree. This is the most comprehensive video.

@brianb579 5 ай бұрын

This tutorial was my turning point from being beginner level to becoming a intermediate Level. Thank you sir.

@jonathanarklay2529 3 жыл бұрын

Could someone please tell me why this guy is not a KZfaq superstar? Every one of your videos is a winner. Informative, calm, interesting and engaging. Above all, really useful and practicable knowledge. 👍

@antalz 3 жыл бұрын

Thanks so much! I think I can answer your question: 1) I've only been on this somewhat seriously for 1.5 years. Most channels take a few years to really take off 2) Upload interval has been... inconistent at best. 3) A lot of the content is kinda niche, and something like this tutorial needs a while I think to show up in search. I've noticed several videos now only started to do well months after being uploaded. In fact my portable air conditioner window plate video is really picking up speed now. I'll probably be quite inconsistent still for another half year or so, then I'll have more time to post. I'd love to take this KZfaq thing fulltime, maybe one day. Thanks again!

@Parken26 Жыл бұрын

If I was the boss at the place I work, I would hire this guy right away ☝🏼

@user-en2gh9fs1f Жыл бұрын

This may be the best Fusion tutorials I have ever come across. Dude deserves a pay raise this was so incredibly helpful.

@auronotcs5440 2 жыл бұрын

I think I've learned more from the first 5 minutes of this video than most of the other tutorials I've ever watched. Thank you so much.

@antalz 2 жыл бұрын

Thanks mate. I can say writing a script for videos like this is very important, to prevent myself from talking about tons of irrelevant tangents. Great to know that it does work.

@tonycox9397 2 жыл бұрын

Content. Delivery. Style. Speed. Everything...simply sublime. I think in Dutch, it's bewonderenswaardig!

@DavebotBeepBoop 10 ай бұрын

Incredibly helpful tutorial! I've been learning Fusion 360 as a hobbyist and have been struggling with joints and animations that are based off of joints. The other tutorials show how to marry one or two components together, but usually not more than that, or they don't talk about what needs to be considered when editing joints part way through a project. Going through a real project and having focused commentary on the topic was extremely helpful. It was beneficial to see a workflow that involved revising existing joints and keeping things organized.

@davidsteward8281 2 жыл бұрын

I have been using Fusion 360 as a hobyist for about a year now so pretty much have the basics under my belt which, is needed for this video. However I am amazed how easy it is to understand and follow Antalz's work flow. Everything is explained with an free and confident flow which for me makes the content easy to absorbe. Definitely a talent for teaching.

@antalz 2 жыл бұрын

Thanks for that, you're making me blush

@Wolverine3196 3 жыл бұрын

Every videos a winner. Thanks Antalz!

@antalz 3 жыл бұрын

Thanks for stopping by again!

@noahriecher3392 Жыл бұрын

In the first 20 seconds this guy speaks directly from my soul. I learned 4 different CAD-Softwares before and they have been somewhat simular but then i go to fusion and feel like a toddler.

@kevinlease2990 3 жыл бұрын

you're a great teacher, keep up the great videos

@antalz 3 жыл бұрын

Thank you, and I will for the foreseeable future!

@chrisnurse6430 3 жыл бұрын

Spot on - so many other presenters wonder way off topic and waffle so much that it’s impossible to learn. I love this channel.

@westonlindbeck6755 2 жыл бұрын

Coming from Solidworks, working with assemblies in Fusion360 has been infuriating! You're video has shown the correct way to do everything I have been doing wrong. You have also shown some new features I didn't know existed. Thank you SO much for this video!

@antalz 2 жыл бұрын

Thanks you! Fusion360 is a bit weird with joints vs mates for sure. I do think some complex movements are much more feasible with mates than with joints unfortunately, like cam-track movements. I don't have much Solidworks experience though.

@JulienVanier 5 ай бұрын

I was exactly in the situation described: able to model moderately complex parts for printing, but never attempted to assemble parts together into a complete machine. This was the perfect video for me. I'm absolutely confident I'll be able to do this now. If I forget how to do one of the steps of creating an assembly, I know exactly which video to come back and watch! Thanks for putting this video together! I also really like you explaining your best practices for sketching, using constraints and mirror instead of duplicating dimensions, and why some parts should be sub-components. This video is a Fusion 360 mentoring gold mine!

@syedayaanalizaidi7439 3 ай бұрын

This was such a refreshing tutorial, where it was challenging yet doable at the same time coupled with your guidance throughout the video, perfect! I learned so much and gained valuable experience on how to put together an assembly. Btw this was my first time attempt at assembly and I'm happy to say I nailed it!

@antalz 3 ай бұрын

That's great to hear, happy modeling!

@EtienneLabuschagne 4 ай бұрын

What a treasure trove of tips and tricks for Fusion 360. I've used this software on and off for years now and didn't realize there were so many little things that I missed! Thanks!

@malcolmhodgson7540 Жыл бұрын

Absolutely incredible. Learnt so much. I am just starting out but have a project in mind. No other videos really shows me how to go about drawing up a complex machine. This has given me such a great start. New subscriber!

@hugueshenrion6642 2 жыл бұрын

This video deserves more views, thank you so much, you cover the basics as well as the advanced stuffs in a streamlined fashion like a few other videos do.

@antalz 2 жыл бұрын

Thanks for that mate, good luck with Fusion

@ImolaS3 Жыл бұрын

After 4 years of using Fusion, creating 150+ drawings including a fully animated 3D printer that I then built, I feel I have JUST learnt to use Fusion after watching this. Thanks, loads!!!

@antalz Жыл бұрын

Thanks, cool that you gave a tutorial a chance even when you already had that much experience!

@diaboloavocado Жыл бұрын

Thank you, I got many good tips. Never realised you could change material colours so easily and the component coloured timeline is great. Good pace too, you covered a lot of ground quickly.

@jimthompson5686 2 жыл бұрын

Just discovered. Clear, concise, detailed. Awesome work. Keep it up.

@elve44 2 жыл бұрын

As a French and speaking very little English I followed most of this wonderful video, very clear and very educational thank you very much

@antalz 2 жыл бұрын

Merci beaucoup! C'est la meileure Francais que je parle.

@TLervis 2 жыл бұрын

I have resolved myself to put this video on repeat for the next while. Awesome workflow.

@jager9633 Жыл бұрын

Best video on actually working with assemblies I've seen yet. Thanks.

@mike19033 2 жыл бұрын

Awesome video!!! This example is brilliant - you covered so many things just in passing that (as a hobbyist) I didn't want to watch an entire tutorials on. Thank you so much for putting this all together. I will be watching this several times :)

@antalz 2 жыл бұрын

Thanks for that mate, that's what I set out to achieve

@hansratzingerselbstandiger9786 10 ай бұрын

Absolut amazing! Better than every other tutorial of Fusion 360! Thank you so much!

@samuelelevi8788 Жыл бұрын

Your videos are pure gold to learn fusion, thank you very much!

@dts7824 6 ай бұрын

Perfect! Just what i was looking for. Thank you for this 😊

@jimfraley4135 3 ай бұрын

Really great video! The video answered a lot of questions I've had around assemblies and joints and just general workflow. Thanks for taking the time to put these together!

@natel7639 3 жыл бұрын

Your videos are so informative and easy to follow. Excellent!

@antalz 3 жыл бұрын

Thanks a lot!

@chrisnurse6430 3 жыл бұрын

Thank you so much from an F360 noob who is designing a 3D printer. This was super concise and very thorough 🙏🏼 new subscriber!

@antalz 3 жыл бұрын

Thanks so much! Good luck with the 3D printer, that's quite ambitious

@chrisnurse6430 3 жыл бұрын

@@antalz this will be my third build but the bed will be 750x750 on my new one. So pretty epic 🤯 Your video is helping me test my design before I start cutting extrusions.

@tomlorenz2833 Жыл бұрын

Wow!! You did an absolute amazing job with this video!! Very educational.👍

@peterscott905 Жыл бұрын

you have made it very easy to understand how to achieve complex structures with simply explained actions.

@SiMon-mb1zg 4 ай бұрын

Thanks for this great help You even answered a lot of questions i didn´t really know i had and i like the styl how you modle without lots of skipping repetitive steps

@retarded89 Жыл бұрын

I hope you continue to make these videos, the best I've found on youtube so far, by quite a large margin (beginner).

@antalz Жыл бұрын

Thanks for that, I do still want to, but still quite busy with other things unfortunately. Are there any Fusion topics in particular you'd like to see?

@davidquirk8097 2 жыл бұрын

Thank you. This video has taught me so much. I now see that I need to be using joints rather than align and have a much better idea of how to do this. I think I'm going to be watching this video again and again.

@antalz 2 жыл бұрын

Thanks! There's a lot of info in this one so rewatching some sections could be helpful. Align does have its uses by the way, I used align to put the teeth on bevel gears in my video on bevel gears

@stuartmcmillan6679 Жыл бұрын

only been doing 360 for a year, would help if minor detail was omitted , focusing on joints, then going back over filling in detail, still this recording takes me to a new level 😍😍👍👍

@antalz Жыл бұрын

Thanks! It's a difficult balance, not every person watching is at the same level, yet you also want to keep up the pace.

@antonioaguilar6467 3 жыл бұрын

It' is just a matter of time for this channel go 100k+ subs, great content man!

@antalz 3 жыл бұрын

Thanks so much, I hope that with work, patience, and improvement it will get there eventually

@niki2111 2 жыл бұрын

This is the best exhaustive and focused tutorial I have seen,

@antalz 2 жыл бұрын

Thanks a lot, glad you liked it

@raabaman Жыл бұрын

You made this tutorial 2 years ago. I just went through it today and it's still SUPER useful! 👍

@antalz Жыл бұрын

Thanks a lot! Thankfully not that much has changed. I think mirror can now instantly do combine too, so you don't have to do the operation separately. That's the only change that comes to mind, at least when it comes to this video, so that's lucky I suppose!

@haoboyuan8082 5 ай бұрын

What a great video! You have shown all common challenges I have met. Thank you, Antalz!

@snan1384 9 ай бұрын

This is great material, that cleared a lot of ideas behind fusion360 effective workflow. Thank you!

@ThomasGanss Жыл бұрын

Thanks for the great video, bud. Coming into Fusion from Onshape has been bewildering, but your example here really helped to straighten out a lot of the assembly concepts that make Fusion unique.

@antalz Жыл бұрын

Thanks mate, and that's a good reminder, I should still check out Onshape and SolidEdge community to see how they stack up against Fusion.

@johnrussell2679 2 жыл бұрын

Thanks for creating this video. It answered many questions that I had on Fusion 360 construction.

@antalz 2 жыл бұрын

My pleasure, glad to know it's helpful

@luftstolle 2 жыл бұрын

This video is amazing, thank you so much for making it!

@MrEsharifov 3 жыл бұрын

I would like to thank you for providing an excellent tutorial session and sharing your knowledge. I also learned new tricks. I will look forward to new assembling tutorial sessions from you related to CNC machines or others , etc

@antalz 2 жыл бұрын

Thanks a lot, I don't have any further Fusion360 tutorials planned but maybe it'd make sense to make a few more. They take forever to make though

@adambergendorff2702 6 ай бұрын

Excellent Video! Wasn't planning on watching an hour video, but it kept my interest through the entire length.

@antalz 6 ай бұрын

Thanks, honestly encouraging to know at least some people go the whole hour.

@sharish08 2 жыл бұрын

The best fusion 360 tutorial I had come across,as a beginner , learned lot of stuffs from your video👍

@antalz 2 жыл бұрын

Thanks mate, and best of luck with Fusion360

@doulos5322 Жыл бұрын

Thanks man enjoyed watching your work flow good way to stay organized!

@davidwolfenbarger7383 Жыл бұрын

Wow! What a great, extremely helpful video! Packed with tons of great tips and illustrating a very practical example. Thanks!

@antalz Жыл бұрын

Thanks mate, great to hear!

@ChristophLehner 2 жыл бұрын

you're the real MVP in teaching fusion. thank you so much!

@antalz 2 жыл бұрын

You're welcome, good luck with Fusion

@roelloeffen Жыл бұрын

Big thank you! Assembling has become fun...

@boredomjustacceptedyourfriend 6 ай бұрын

Hello, thanks for this video, it's really great. I'm learning the component/assembly thingy and found this video, I was planning to learn on joint too after, and I got all that in one video. Your explanations are very clear and you show everything. Luuna.

@hangar4pro 2 жыл бұрын

You sir, deserve many more subs, as IMHO, you are one of the tops in F360 instructors...if not the best. Bravo! And please, keep them coming...for not only educational advancement of this brilliant software using your workflow/methods, but for sanity's sake as well!

@antalz 2 жыл бұрын

Thanks a lot mate! I'm hoping to get back into things next year.

@hangar4pro 2 жыл бұрын

@@antalz That's fantastic! I'm sure we'll all be anxiously awaiting for more Fusion mania! :)

@inventorj 10 ай бұрын

Awesome video... very very helpful 'real' world situations and using all the Fusion toolbox to achieve things. Thank you for this!

@andycnx7177 Жыл бұрын

Truly excellent video. Fantastic insight into your process, great tips and the tempo was perfect. Subbed, liked and shared.

@Neutel_99 Жыл бұрын

I mean, this is just amazing. I've seen u don't upload in some time, but u really should continue with this fabulous content. Thanks mate. It's fine if u don't have time to record videos, because your private life should come first than youtube, but if u do have time, pls continue with this amazing work. We need more people who work like you. Thanks! Amazing!

@antalz Жыл бұрын

Thanks mate, I'm hoping to get back into it but it probably still isn't going to work for another few months at least.

@Neutel_99 Жыл бұрын

@@antalz, youtube must not be a priority, but if it works all together it will be nice to have you back!

@karloleksic2646 5 ай бұрын

exactly what I was missing, thank you 🤩😁

@congoose100 Жыл бұрын

Amazing demo!

@user-ls3xj9fm6q 2 ай бұрын

Thank you so much for this tutorial video. I appreciate your effort!

@ishantandon9167 3 жыл бұрын

This is so informative for practical modelling! Most videos I find do not dive into minor things you require to practically 3D print or Build the structure ( like the spaces for the nuts, screws etc). Thanks again for making these videos!

@antalz 3 жыл бұрын

That was one major reason for me to make this video, a lot of tutorials seem to just focus on what the buttons do. I wanted to also include how to make something you could actually put together, and I wanted to show when you would use which button. I also wanted to cover the different ways to get new components, new component, copy, paste/paste-new, patterns, mcmaster-carr imports, components from other files. It seemed to me a lot of tutorials just made 2-3 components and a joint and called it a day. I feel like I should do a short followup on getting tolerances in Cura. I specifically want to highlight horizontal expansion and hole horizontal expansion in Cura, especially because many people have undersized holes and pockets. I sure did before hole horizontal expansion was introduced in Cura 4.6

@ishantandon9167 3 жыл бұрын

@@antalz A video about tolerances would be amazing!

@directhubfeexam 3 жыл бұрын

@@antalz A tutorial for tolerances in cura would be so helpful! Thanks man!

@guidowassenaar 2 жыл бұрын

@@antalz This was an awesome video, great to see an actual assembly being made from start to finish. I didn't skip a second, there's a lot of nice features included! A followup on tolerances during printing would be greatly appreciated, I always struggle to model in my tolerances, and print sections of my assembly to check these tolerances... There has to be a better way!

@antalz 2 жыл бұрын

@@guidowassenaar Thanks a lot! Currently the better way I know is to set the horizontal expansion such that your external dimensions are good, then set your hole horizontal expansion such that your holes are good. For me it's -0.1mm horizontal expansion to make parts a tiny bit smaller, and 0.1mm hole horizontal expansion to make the holes a big bigger. I should probably put that answer in video form, because it gets asked rather often

@winandd8649 Жыл бұрын

Eindelijk iemand die het duidelijk uilegt, hulde!🙏 It was driving me nuts.. 😱

@zeplichal 2 жыл бұрын

Incredibly helpful tutorial! Thank you!

@antalz 2 жыл бұрын

Glad to hear, thanks for watching

@craigsunderland3849 3 ай бұрын

I thought I would jump on here as a user of Fusion360 and say that I love your teaching method. Speed and pace are perfect for me. I wish I had found your channel sooner. I do have an issue though with the redefining the sketch plane for the bottom plate, there are a number of compute errors when I follow the instructions. Any pointers would be amazing!

@piotrczerwonka3133 2 жыл бұрын

Wow, I learned so much from this video.

@edipkakmak Жыл бұрын

Great video!

@Old-school-gam3r Жыл бұрын

Thank you I have learned too much things frrome this video ❤

@andryKnavs 4 ай бұрын

Thank you for this video. Best Fusion 360 video on youtube :).

@hallcero Жыл бұрын

Enhorabuena. Mejor no se puede explicar. He aprendido algunas cosas muy interesantes con tu video. Te animo a que subas más ejemplos de conjuntos hechos en Fusion 360. Un saludo!

@mikebreiteneder 2 жыл бұрын

I agree with SenoreQueso! The best Fusion 360 tutorial ever. Thx Antaz, pls make more videos like that. Really appreaciated, Thank you!

@antalz 2 жыл бұрын

Thanks! I'm hoping to get back into videomaking, but no Fusion360 videos planned yet. Any topic you'd like to see covered?

@kavorka8855 2 жыл бұрын

Wonderful wonderful tutorial! I've learnt q lot of tips and tricks! Thank you very much! :D

@MauricioHernandez-de8is 3 жыл бұрын

a good video as always

@antalz 3 жыл бұрын

Thanks for stopping by again!

@RillsPark Жыл бұрын

Best tutorial for Fusion360 in KZfaq

@slawosze 2 жыл бұрын

Thank you for the excellent tutorial!

@danielpapukchiev3754 Жыл бұрын

this was a great tutorial on how to use fusion 360 efficiently! I love how you make it looks super easy, it inspires me to continue learning and maybe someday switch my profession from software engineering xD

@antalz Жыл бұрын

That sounds great! It seems like a difficult switch to make, but here in Europe people do get very hung up on what degree you obtained.

@user-lv4zn1zj6z Жыл бұрын

Super interesting!! I learned a lot of tricks! Thanks for this video!

@tlump Жыл бұрын

Love the content man! Saw your still active in the comments, hope you get back to making videos and helping people like me! Thanks.

@antalz Жыл бұрын

Thanks! I do check my KZfaq studio from time to time. I have a script ready to go but I keep putting off actually recording. I'm busy with other stuff too, but it feels like I'm making excuses for myself. I'm not sure why.

@RolandOfGileadOnYT Жыл бұрын

Thank you, much appreciated tutorial!

@bijudhanapalan2982 2 жыл бұрын

Thanks for the wonderful tutorial

@Myeong_ei 2 жыл бұрын

Thank you for telling about screw animation, sir!

@ericrudawski8586 2 жыл бұрын

Awesome video. Thank you!

@diyzona 3 ай бұрын

Nice and detailed

@PragueTech Жыл бұрын

i've learned more in this video han i have in a week working on my own. Thanks.

@andrewtarr4474 2 жыл бұрын

Thank yo so much for this tutorial, it was a pleasure to see how and why various elements/functions were used in real time, please make another video around assemblies in Fusion Many thanks again

@antalz 2 жыл бұрын

Thanks! Is there anything you'd like to see specifically? I'm looking to make some videos again, but I don't have anything on Fusion360 planned yet.

@ItsGamerProYT 3 жыл бұрын

exelente video for learning, i have learned a lot of funsion 360 and on the video

@antalz 3 жыл бұрын

Thanks for watching, good luck with Fusion360

@reinierwelgemoed8171 3 жыл бұрын

You earn my subscribe. Great video man. Keep them coming.

@antalz 2 жыл бұрын

Thanks, I hope to get back into it early next year

@ManrohithPrasad 3 жыл бұрын

Good content for new learners.....

@antalz 3 жыл бұрын

Thank you!

@BaGoDeL1 Жыл бұрын

Wow ! Thank you a lot !

@lowellyates6685 2 жыл бұрын

Nice Video. You also covered other options as you explained the main topic.

@nguyenbao9712 2 жыл бұрын

thank you so much for a good video. I'm really like your video, and I hope you will make many of the best videos.

@antalz 2 жыл бұрын

Thanks mate, I hope to get back into things at the start of next year

@gigga1997 2 жыл бұрын

Great video. Thanks so much!

@antalz 2 жыл бұрын

You're most welcome, thanks for watching

@paulsmith211 2 жыл бұрын

Great presentation. I'm subscribed now!

@antalz 2 жыл бұрын

Thanks mate, and good luck with Fusion

@omarsalem5832 2 күн бұрын

Thank you!

@user-jz4zu8ln5y Ай бұрын

기계원리를 만드는 과정이 힘들었지만 아뭊든 영상 잘보고 갑니다

@andrewtarr4474 2 жыл бұрын

Thanks

@andrewtarr4474 2 жыл бұрын

My pleasure keep up the excellent work

@printerstein1321 2 жыл бұрын

This was both one of the most useful and most frustrating videos ever. I learned a great amount from it, but your screen size is such that I can't read everything, and you often get comfortable in what you are doing and say things like "let's connect this and this" and I can't see what was happening and you didn't call it out verbally. Having said this, I learned more than I set out to learn and I am very appreciative of you making this video, thank you.

@antalz 2 жыл бұрын

Quite unfortunate about the resolution, I honestly hadn't considered how things would look on other screens. I also do speed up a bit, that's a tricky balance between pacing and clarity. If I go too slowly then some might find the tutorial really long-winded, but perhaps I went too far to one side in that balance. Thanks for your honest feedback, glad to know it was useful to you nonetheless

@printerstein1321 2 жыл бұрын

@@antalz I totally get how pacing can be hard to balance. I found I can slow down youtube videos and that helps in situations like these. Plus I can always back up and see it again. As for the unreadable details, as long as you call out all the part names and features and don't use terms like "this and that" or call things "it", then following isn't that hard. Please continue to make more videos, this was very helpful regardless of my issues.

@ProfessorM 2 жыл бұрын

thanks bro

@watwsplace8614 4 ай бұрын

Thank you real part

@jensaugust743 Жыл бұрын

What an amazing walkthrough! Even with a decent understanding of Fusion I still found your workflow amazing! Just a shame Autodesk seems to be locking down more and more features for hobby usage.

@antalz Жыл бұрын

Yeah it is, I'm on a pro license but they recently removed local solving for simulations so now I can only do static stress. Not a huge disaster but I fear what else might go. If you want to be adventurous, maybe solidedge community is good for you.

@angelzapata2721 2 жыл бұрын

Great Video! congrats, I'm trying to switch from NX Unigraphics to Fusion 360.

@antalz 2 жыл бұрын

Cool! Why are you making the switch from NX? Did you use it at your job?

@MrGeorge104284 2 жыл бұрын

Thanks!

@antalz 2 жыл бұрын

Thanks to you too, and good luck with Fusion360

@MrGeorge104284 2 жыл бұрын

Took me a couple of hours but was definitely worth it as a beginner. Learned some new workflows and best practices that you just don't get in other tutorials.

@antalz 2 жыл бұрын

@@MrGeorge104284 Thanks, that was a big reason for making this one. Other tutorials just felt a bit shallow to me.