2007 Prius with silver logo key fob…this process worked like a charm, the first time. I just followed along with the “success” videos. I can’t thank you enough for doing this video. It saved me a TON of time, and over $275 by avoiding the dealership. Thanks again!!!

Yay! After several unsuccessful attempts to program a new smart key fob following written directions, I found this video. Being able to see the dash light change and actually have the steps demonstrated was incredibly helpful. It took me two tries to get the fob to start the car. My husband then assisted with the rest of the programming. We had a little trouble coordinating the timing with the lock/unlock buttons, but the fifth time was the charm. This is my daughter's car and it's an 2005. It hesitated at the end, but finally the locks cycled and now everything works. NEVER GIVE UP! I think it's outrageous that the dealerships charge people so much money to do something this simple. What a racket. Thanks again for the demo video!!! :-)

Totally worked on a 2005 Prius. Old fob had a replaced cover so it was actually a silver logo smart key but didn’t show it. This plus another video pointing out the need to press and unpress the “key” button under the steering wheel were “key” to giving my old car and key situation a few more years of life. Thank you!

absolutely works great on smart key. the door function does take at least 6 tries!! I think the key for me was the fob only goes in once on the second round (counter to other instruction sets) and you do end up pushing the ignition button three time...once on, second for display and third for off. Thaks a bunch

Oh my goodness- This was so helpful! I reprogrammed mine in “real time,” with your video and it made the whole process so much less intimidating and mysterious! Thank you thank you!!

9 years after your video. You help me. Thanks a lot

Purchased the Key off of Amazon. Followed the printed instructions after watching the video. Had trouble the first time around with the first part... came in and watched the video. Tried it again with success. Had trouble with the second part. came in and watched the video again. I thought it would flip the locks after holding down the lock/unlock buttons, or even the lock key... I finally figured that you must wait a little after the last button push for the door locks to click. Finally had complete success. Both written instructions and video are a must!

Thank you! A lot of the instructions online were missing something. You did it right the 6th time and I was able to do it right because of it! Thank you!

Beautiful! I bought a spare key online 6 years ago, but the dealer wouldn't program it for me because I didn't buy it from him. It sat in my console until tonight. I had a tough time completing the 2nd part until I replaced the battery in the "new" fob. Now I have a spare smart key! Thank you so much!

SUCCESS! It took a few tries, especially when I realized my old FOB actually had to work. LOL! I just changed the battery in it and was able to program the new FOB easily. I'll keep the old one as a spare just in case. Good job on the video and fastforwarding past the parts that didn't work for you.

Dude, you are a life saver. Ordered a new key fob on Amazon then watched this video. Thanks a bunch!!

Great job futureman! Here are the written directions as you demonstrated them, may be easier for some to follow. It worked perfectly the first time, for Step I and II. STEP I (Program for starting) Put Old Key into ignition 5 times and leave in on 5th time. Open and close driver door 6 times Pull Old Key out of ignition Put New Key into ignition (light on dash will flash) When light stops flashing (new key should be able to start car) STEP II (Program for Smart Lock/Unlock) Open driver door with no key in ignition Insert and Remove Old Key twice Close then open door twice Insert and Remove Old Key Once Close then open door twice Insert Old Key Close the door Press Power Press Power Press Power Press and hold Lock and Unlock Keys on Old Key Press and hold Lock and Unlock Keys on New Key Press Lock on the New Key Sláinte

I'm glad this video is here. Just like last time I lost my key, I tried the written instructions that I found and didn't get it to work but then found this video again and I could see how my timing was a little different and it worked on the first try. Thanks for posting this.

Worked! Take your phone in the car with you and do it with him. After the first step is done skip to 5:33 and follow him from there. It took me two times and I got it to work. Saved me some money at the dealer.

Great video and entertaining to boot :) Successfully programmed my new fob on the first try thanks to your clear instructions.

I was able to get the first part completed successfully - the smart features :( I have tried at least ten times- it does everything like the video until hitting the lock and unlock to test at the end. ANY SUGGESTIONS?

Got it third try. Thanks a lot. Press new fob buttons hard!

Perfect! My old key was so busted that it kept triggering the horn alarm all the time. Now I have a replacement that works!!!!

Couldn't have done it without you(and believe me, I tried). Thanks!

Thanks very much for your video, you saved me $75 from a locksmith (cheapest price I could find, dealer wanted $132).

This video saved me hundreds of dollars - thank you so much for taking the time to make this video!

Thank you. This saved me $220 estimate I got from a locksmith. Also the last part for lock/unlock, if it cycles twice, that means you pressed the lock button too long. This last part should be quick; do not hold onto it for more than a second.

It worked for my 2005 Prius. I bought a new fob from amazon and programmed with my old working fob. I followed the procedure to the tee. Still took me 4 to 5 times to get it work. The first part was harder than the second.

I am a firm believer in acquiring knowledge,it helps to have confidence. I change the battery myself in 2 minutes.Thanks for displaying useful knowledge. Laiq

Thanks sooooooo much! I saved myself a lot of $$, works perfect, literally took me 5 min to do

You saved me sooooo much money! Thank you so much for the great instructions! God bless you!

thanks for the great video you just saved me 130 Dollars. god bless you and your family

Worked great. Took a few times but works now!

Just worked for me May 20, 2024 with the Amazon fob. Other videos did not work for step 2. Cancelled my return. The greatest.

Does the original one still work so you can have two?

Entertaining and helpful. Thanks for the video! (I used a new key)

You are a life saver. Followed you exactly and worked. 😀

Thank you man !!! you are the holly savior cause i lost my backup key i have now only 1 key left

finally i bought the key from amazon and work in 5 min the other key was from ebay not original thanks alot

When you said leave that in, what did you mean. Put the old key in one more time or put the new FAB in slot ?

Thanks SOOO much for this video. Saved me money, and kept me laughing with all the references to Shite!

DON'T MAKE THE MISTAKE like I did of buying a used key on Ebay... you can only FULLY program a new key. A used key can be programmed to start the car and get you home, but I could not get the remote functions to work (part two of this video's programming). The author of this video, I believe, used a new key. Please correct me if I am wrong.

Thank you for taking the time to do this, it was very helpful and I greatly appreciate it!

worked on first try. thanks to you!

This is great. And this worked perfectly.

Thanks for the video saved me some money

Should it be taking more than 10 minutes for the key to reprogram? Still blinking after 10 minutes...

Thanks for the great video. The tutorial works with new key Fobs. If you have an programming issue with old key Fob in Denver area, I can program it.

Works great!!!!!!!!!!!!!! Saved $250 :) Thanks

Thanks for posting this. My fob stopped working. I changed the battery which didn't help. I followed your steps starting at 5:36. After pulling out the key for the final time (6:16) my fob worked again.

Daughter is buying a 2006, only has 1 fob. Glad to have found this video futureman, I didn't know it was possible to do oneself. Frankly this "dance", along with the ones to turn off the reverse beep alarm and passenger seat belt alarm, are about the only place Toyota screwed up on the Gen II design. There is a large screen right in the middle of the car that SHOULD have been used to do all these things. On/Off for the alarms and a button to program a new fob that is plugged into the car. How much work was it to design and implement all the "dances"???

Just so anybody interested knows: You don't program the new key to the car, you actually program the car's computer to the new key. That said, the computer can only be programmed for a total of 5 keys, including the original 2 you got with the car. If I'm correct, you can only program the car for new key with the "master" key being one of the ORIGINAL keys, so be careful not to lose either of those. Printed instructions for the "chicken dance" programming can be found someplace online. Just Google the topic.

The light will blink exactly 30 times while programing the new fob to start the car

Can't I buy the remote with 3 buttons and program it? My remote is smart entry but only 2 buttons...

Thanks for the video one question is will it start the car without having to insert it in the slot ..?

God bless you. 🙌 I did it on my first attempt. Thank you 😊

It worked for me. Thanks!

I got a replacement case off of amazon. I have tried step 1 at least 6-7 times. When I get to where I put in the replacement key. It starts out flashing fast then slows down and won't stop, takes for ever? Help???????

At the last step when I press lock on new fob, my doors unlock and lock twice unlike his. And new fob does not work. Any idea what does that mean?

Followed instructions and took me about 5 minutes (second part took longest) thanks for video and link to Amazon, also love the way you say shit LOL

Nice work. I just followed your motions and had no trouble at all. I also appreciate the "fast forwarded" bits as it shows how complex the process can be if you do something out of order. Nice work.

Is there any info on programming an old key with a new transponder?

great stuff man. worked like a charm

This worked really well, thank you!!!

Okay so I lost my original key so now I have the unprogrammed one can I still do it ?

you know you can replace the case on the old one, and just move the board and the transponder from inside it to a new case right?

Thank you Thank you thank you!!!!!Have a bless one

1:30 inmobalizer success 5:30 Remote success

By doing this, do you "kick" your old fob from working or do you now have 2 fully functioning fobs? Want to have one for me and my wife as we only have 1 right now. Thanks so much!

This was really helpful, thanks! We were able to do it in one sitting.

Got it on 1st try. Thanks for posting.

thank you so much. this worked perfectly

here are the steps. ** STEP 1 - program to use as start key old key in ignition 5 times then leave in open/close the door 6 times remove the old key put new key, security light blinks for 1 min will program new during this time, wait til security light stops blinking then take out key and open and close door ** STEP 2 - program to use as remote lock/unlock open door (no fob in) insert old fob twice with door open (end with fob out) close door open door close door open door (leave open) insert old fob once and remove (end with fob out) close door open close open (leave open) insert old fob, close door press power press power again press power a third time then, pull old fob out, locks should click press lock and unlock buttons at same time on old fob press lock and unlock buttons at same time on new fob then press lock on new fob

God Bless you My friend

For me this wouldn't work initially. I had the original key electronics but in a new case. Due to this it would not go into programming mode. The case has the electronis PLUS one chip needed for the key slot. Once I use the old case WITH the second chip, it would go into programming mode. After that all steps worked. Glad I din't throw out the old case or else the keyslot chip would have been gone.

What if i didnt have the silver toyota logo on back ? I have the black one? Do i try both steps.?? Does it work??

was the key that you programmed a previously programmed key?

Every attempt at the last step, mines lock cycles twice instantly, deeming failure. Help ? I do it following your video each time. I quit last night and plan on trying again this morning

Great video. I was able to program the new remote after many attempts. However, the red button is not working. How do you program it???

Thanks so much for your video! You are amazing!

Awesome video . It worked perfectly. Thanks

Thank you, futureman! Worked like a charm! Should the panic button work also using this method? All the other smart key functions work on the new fob now except the panic alarm. Thanks in advance for any comments you may have.

Ur a life saver

I have a 2009 Toyota Prius and a silver logo on my original key. I bought a non-smart proximity key replacement online. I don't really want remote starting features, totally don't mind putting the key into the car but I was wondering if the "black logo" key they I bought can even be programmed to start the car at all? Should I just return the black logo key and get the silver key somewhere?

Can I use this procedures for 2008 Prius smart key remote which 2 existing keys can start the car, but they lose ability to lock/unlock doors? I might have to do it 2 times for one for each key, not sure. I also have Techstream software so maybe I will try that as well.

Thank you! Works perfectly.

Howdy Futureman! Hope all is swell in Scotland! I appreciate your video immensely...education works easiest via humor :) I've run into a stone wall on one of the last steps, and I can't seem to surmount it. Bought a brand new smart key from your link above, programmed it to turn ON and OFF our 2008 Prius, have gone through the process with success of the Smart Key steps UNTIL the very last portion: when I press the Lock & Unlock simultaneously on my NEW fob, then press the Lock, the doors go through the lock/unlock cycle twice instead of once. And it has ended this way multiple times...even if I press the Lock & Unlock simultaneously twice for 1.5 seconds like I read on another set of directions online. I just can't seem to get only a single lock/unlock cycle and then success :( Any thoughts? Thanks for your insight, and keep up the smiles!

Does it work on used keys or just on brand new ones?

Hi that is works on Toyota auris 2016 ?

I got the fob programmed and everything is working, but I do I get rid of the programming light on the dash?

My sister gave me her key from her same generation Prius and I wanted to program it for a backup as I only have one key. Will the old key still work if you do this?

Link to written directions please

Hi just want to ask that if I have a spare key fob of different toyota prius, can I programme it like it is shown in your video . Will it work in my toyota prius. Looking forward to hear from you

You are amazing...could you come to Calif to program a new key for me!!! Thanks

I managed to kill my key by getting it wet. Can I still use it to reprogram another fob?

this programming can be use in old fob from another cars. I try it and at the end the fob being programmed when I do the lock, my car answer with 2 cycles, but do no open door or turn off my car remotely.

totally worked!! Thanks!

Entertaining and helpful. thank you

When you press power is your foot on the brake or no?

Very goood !!!! thank you so much !!!

I have a Toyota Passo 2006 odered from Japan with the chipkey not working, previously a key fob used but now it won't work. Please help...

It gets hilarious after 5:00

where do I plug my 2013 toyota prius key into....into the round starter button?

What happened you dont have old key or old key doesn't even work? how you can programed new key without old key working?

I've noted and tried the steps several times on my '04 Prius on an Amazon replacement FOB, but can never get beyond the flashing light. Anyone else having this happen? Thanks for sharing this.