Toyota Prius (Smart key) programmed, Half of chicken dance.

Рет қаралды 50,209

6 жыл бұрын

2004 thru 2009 Toyota Prius Smart Key (SILVER LOGO on Back of FOB). Info only ...
1. Driver door open
2. Insert original key in to key slot and remove 2 times.
3. With Drv. Door still open now- Close and Open door 2 times.
4. Insert Original key in to key slot and remove 1 time.
5. With Drvr Door open - close and open door 2 times.
6. Insert original key in to key slot and LEAVE IN.
7. Now close driver door.
8. Hit power button 2 times..DO NOT step on BRAKE.!!!! After dash lights up for 2 to 5 seconds, NOW HIT power button to turn off vehicle.
9. Remove key from slot. You will hear Door locks should cycle.
10. Now take original key and hit LOCK and UNLOCK button together. You will hear door locks cycle.
11. Take NEW KEY Hold down LOCK and unlock buttons for 2 seconds, then HIT LOCK button, NOW locks will cycle. YOU ARE DONE..
Do this at your own risk, this is informational only on how I did it and it worked great.

Пікірлер: 55

@ibenzawla 4 жыл бұрын

Tried many others but your instructions finally works for me. I like that you keep repeating the process to help people understand. Thanks man!

@henryd42501 4 жыл бұрын

Glad it helps and saves you money.

@daleferguson1233 12 күн бұрын

😮Great Video 😮

@baljitnijjar8175 Жыл бұрын

It's good to know how to program the key

@henryd42501 Жыл бұрын

I'm happy it helped.

@myvids20121984 4 жыл бұрын

It worked for me...thank you so much

@akashrabbani5361 2 жыл бұрын

I just wana say thank you I tried so many other videos but yours worked without any problems

@henryd42501 2 жыл бұрын

Glad it helped.

@hishammisa1037 4 жыл бұрын

Put in the key? Mine is smart key for Estima/Previa ACR50.....how?

@robertzekanoski1634 3 жыл бұрын

I liked your instructions, very clear. But what ended up happing is that my original key fob stopped locking doors after I did your chicken dance? So now I can’t lock the doors to my Prius at all. Any advice? What did I do wrong? I can only drive my car now when I insert it into the slot. The new one doesn’t do anything.

@henryd42501 3 жыл бұрын

For info only: Pls make sure your key Fob has silver backing. Take a second look at the steps. I know I missed it the first go round. If not then the full.chicken dance will solve the matter.

@IemSopheap 5 жыл бұрын

Dear Mr, did this process would work on your new metal key ?

@henryd42501 5 жыл бұрын

Yes

@tniexpress9936 5 жыл бұрын

Where did you buy the new key? I have the Prius 2006 with silver logo key. Thank you for the instruction video!

@jerryswhite2998 5 жыл бұрын

Try Walmart.com

@henryd42501 5 жыл бұрын

Key bought from ebay

@thehonesttruth8808 20 күн бұрын

I get to the very last step and my new fob does nothing

@claytonhaymes3310 3 жыл бұрын

Nice my fob now works to turn on the car but it does not unlock and lock the car. Do you have a separate video on how to program the fob to lock and unlock the car?

@henryd42501 3 жыл бұрын

It should lock and unlock if done properly. Because the doors will lock and unlock. Please review video and make sure the driver door is left open when asked and closed accordingly. Hope this helps.

@henryd42501 5 жыл бұрын

Did you replace the battery on the key fob?

@CodyPalmenMD 5 жыл бұрын

Same question the old key fob does not lock that's why we got a new one so when I try to lock/unlock I get stuck. I programmed my new key and it works when I put it in but I can't get the proximity set up.

@henryd42501 5 жыл бұрын

@@CodyPalmenMD first make sure you have the key fob with the silver logo on back cover and your car has proximity sensor built in it (the black button on the outside driver door handle, and when you put your hand through the driver/pass side outside handle door(s) unlocks). If you can drive the car with the new key fob but can not lock and unlock, i would do the lock and unlock again or the entire procedure again. I had issues programming 1st time but 2nd time everyrhing worked out fine. *** Please make sure you have the correct (silver logo on back) key fob. *** I would like to hear if you solved your issue. Thanks

@CodyPalmenMD 5 жыл бұрын

@@henryd42501 it is a silver logo key. The proximity feature as well as the face buttons in the orginal stopped working when the was dropped in water. You can still insert it into the slot and it will works. The new key was able to programmed to start the car and the old key can get to the point where the car auto locks once you do the power cycle but when I hold down the buttons on the old key nothing happens because those buttons don't work anymore.

@henryd42501 5 жыл бұрын

@CodypalmerMD. I am not a Toyota mech. Sorry, but if the programming is not working and you have tried it atl east 2x. . Look on line fir complete reset or you may need a shop that can reset all your key fobs, which should also delete all old memories. Sorry can not help further.

@nandomeh8225 2 жыл бұрын

@@CodyPalmenMD did you ever figured it out? I bought this Prius with one that ONLY starts the car when put in the slot, does NOT unlock or lock. Not sure if master or not 😓

@shannonconlee671 5 жыл бұрын

What if your orginal key is the only one you have and it isn't working?

@henryd42501 5 жыл бұрын

I am not sure if the key i havenis the original or not, because i bought my car from auction. I know thw key fob works, so with just the one working key fob I did the entire chicken dance. Both key Fobs works as they are supposed to.

@katietoro3885 5 жыл бұрын

Looked on Walmarts website and I'm only seeing the keyless keys. Is there something you looked up specifically on Walmarts website to find this key with the silver back? I can't find it on Amazon either

@henryd42501 5 жыл бұрын

I bought my key from ebay.

@rmjrjay Жыл бұрын

How can I turn the car on and off without inserting the fob???

@henryd42501 Жыл бұрын

I keep the Key Fob in my pocket and start the car like normal. Hold brake down, press start button once, after all dash light comes on, then ready light comes on. Car is now ready to drive

@mutwirimwiti2102 4 жыл бұрын

Hello, can this procedure work for mark x slot

@henryd42501 4 жыл бұрын

I am not understanding what do you mean by "mark x slot"?

@mutwirimwiti2102 4 жыл бұрын

Can the same process work for Toyota mark X sir

@chenjay2007 Жыл бұрын

For step #11. Make sure when you HIT LOCK button on the new fob, the door lock cycles just once. If it cycles more than once, repeat step #11. This happens to me. I had to try more than 10 times to figure this out.

@ds94703 3 жыл бұрын

Program a Prius 2008 Silver Logo FOB- (Chicken Dance Simplified) Doug Smith revised 07-08-21 PROCEDURE 1: Starting the Prius Note: Procedure can be done with the windows rolled down. 1- Insert the OLD working fob into the slot, 5 times. Leave in Leave it in on the fifth time 2 - Open then CLOSE the driver's door 6 times. 3 - Remove the OLD fob from the slot. The Prius is now in fob programming mode. 4 - Insert the NEW fob and let it remain in the slot. Watch the blinking red light on the dashboard. (at least 2 minutes) When the light stops blinking and goes out, the new fob is programmed. Remove the new fob. 5 - Open then CLOSE Door. (Test both fobs to ensure they work properly) PROCEDURE 2 Programming Door Lock/Unlock (Silver Logo Key Fob - must be New or renitialized at Dealer or Locksmith) 1 - Open door - leave open Open the unlocked Prius driver's door. (leave open with no fob in slot) 2 - Insert then REMOVE OLD fob twice Insert and remove the OLD fob into the dashboard slot 2 times within five seconds. 3 - Close then OPEN Door Twice Close then open the driver's door 2 times , 4 - Insert then REMOVE OLD fob once Insert and remove the OLD fob again 1 time. 5 - Close then OPEN Door Twice Close then open the driver's door again 2 times . Leave open. 6 - Insert OLD fob, then CLOSE the Door Insert the OLD fob in the slot again 1 time , and close the driver's door. 7 - Power off Button 3 times (no brake) ,Press the power button 3 times without pressing the brake pedal - Car turns off remove the OLD fob from the slot. 7.1 - Remove OLD Key from slot ... 8 - OLD Fob: Press and hold lock and unlock key simultaneously for 1.5 sec Open the door, exit the Prius, and The "add mode" is now engaged. (The Prius should automatically lock and unlock the doors twice to verify "add mode" is activated.) 9 - Repeat with new Key. HOLD down 2-3 seconds Press both buttons on NEW the fob simultaneously and hold both down for at least 2 secs. No sound or locking will happen. 10 - Immediately Press just the Lock Button on the New Key Within three seconds of releasing the buttons, press just the lock button. The Prius should respond by locking/unlocking the doors once. This verifies that the new fob is working. If it locks more than once, you may have a key that was programmed to another car and not reinitialized. 11 - Open and Close Door Exit the programming mode by opening the door and closing the door or putting a fob in the slot. 12 - Test the lock unlock button of the NEW FOB Test the new key with the old Key out of range

@zahoorAhmad-qu7wg Жыл бұрын

The problem with my olf fob is that it lock button is malfunctioned. My question is that how I will press both lock and unlock buttons simultaneously as only unlock button will work and the lock button will not. Need help

@fcojavierninguno8315 2 жыл бұрын

The remote key was new or used from another car. try diagnosis and nothing. try manual and neither, but the original if it works

@henryd42501 2 жыл бұрын

New keys, No previous programming on them. I have not programmed USED keys, I can not tell you whether it will work or not.

@fcojavierninguno8315 2 жыл бұрын

@@henryd42501 thanks for you

@pyrotechnick420 11 ай бұрын

so I guess if you're old key fob doesn't lock or unlock then this method doesn't work....

@henryd42501 11 ай бұрын

Yes this procedure requires 1 working key remote.

@moisesdiago7012 19 күн бұрын

Tengo en mismo problema

@1rwclilgurl 3 жыл бұрын

My problem with this half of the chicken dance is my new fob wont unlock and lock the car everything ealse with thw other half of the chicken dance works and with this half thats my only issue. Did i do anything wrong? Or do you think il have to fry something ealse?

@henryd42501 3 жыл бұрын

I would have to ask did you do the sequence correctly? I made my mistake with the door not staying open. I had to write the sequence out before I started. If this doesn't work still then you can do the entire chicken dance sequence. There is nothing to fry because you are just programming. I did do it incorrectly 1st time and only lock and unlock via key pad and not the smart key. I did it again and evething worked great. Today it's still working fine. Lastly if it still doesn't work then you have to take to dealer to program. I ordered my part off ebay as well, dealer part. This is informational only, proceed at your own risk.

@1rwclilgurl 3 жыл бұрын

@@henryd42501 Hey yes i dis the steps over and did make sure to follow the open door sequence. It does everything as you state on the video except the fob is rejecting the program (ithink) because instead the one time lock unlock sequence that the car does when the key is programmed(step 10i belive) after holding the lock n unlock buttons at the same time and then the lock button on the new fob it does it locks and unlocks 2times instead of just once

@1rwclilgurl 3 жыл бұрын

But i do not know if its because the new keyfob to this prius is my old keyfob to the previous prius i owned. I dont think it should have anything to do with that because the year of the cars are not significant one was an 06 and the other 05(current one)

@henryd42501 3 жыл бұрын

@@1rwclilgurl does the old key fob work at all? If not then check the battery, make sure you have a new battery. If you have a key fob that does not work on the car you are trying to program it will not work. You will need the dealer or lock smith to program it for you because they will have a unit override all the previous keys and reset set and program. Also try looking online to see if someone may have come up with a reset procedure.

@1rwclilgurl 3 жыл бұрын

@@henryd42501 yes they fob works. I did replace the battery just in case but I am able to turn on the car with the fob in the slot its just the keyless option isnt functioning and it did on the other prius i had so it should have to work. But every time i try the 2nd step to the chicken dance at the end it locks and unlocks the doors 2 times. 😭

@esvingomezescobar7697 Жыл бұрын

Hey cn el mio n pasa nada

@henryd42501 Жыл бұрын

Please make sure one of your key is master key. If you follow every step and nothing happened then you may need to do the entire chicken dance process.