Detailed down to the final t. I'm not necessarily putting in a backup cam, but this was WAY more informative than any other source out there regarding a double din installation. Thank you good sir, you have saved me a weekend worth of headaches!

I also have a 2004 Dodge Dakota that was once my grandpas too. Im working to make it a daily rig again. Great video

Look for the violet with black stripe wire on the rear of the inside fuse box, opposite side of the fuses, its on the upper right corner, it feeds 12V when you engage reverse. It'll avoid having to connect at the rear tail light.

Just an FYI in case you do any further wiring, there are almost always extra holes cut into the cabs of pickups for this exact reason, they are filled with a rubber plug to prevent water ingress. You can pop out the plug and put a hole in it to pass the wire through. If it looks like you need to, you can fill in any gaps around the plug's new hole with sealant - no need to drill new holes in the cab. Also, if you didn't do so, make sure that you paint the new hole so that it doesn't rust. I put a backup camera on the tailgate latch of my Dakota as well, but rather than drill a hole through the plastic there is a lot of open area underneath the handle where you can feed the wire.

Excellent detail....well done!!!

Thanks. Very thorough.

great video man thanks

Excellent. Thanks

Hey liked the video! I was just wondering I have the same exact truck and I'm looking to buy a tool box for it but don't know what size will work. What Size is your tool box?

Hey where did you get the din frame for the radio ? Thanks nice video

You got a link to this bundle? I am buying a dakota

Hey not bad, but.........y didn’t you use a different back up camera? I have mine mounted in the same spot but an 1” lower and it flush mounted and it’s also wireless. It will get damaged they way you have it mounted. Other than that it’s a sweet 2 din install. Now u just need the under seat twin 12” subs! Sounds amazing in my ride! Keep it up!!

tell me the unit number to order but my dakota is the 2006 can you help me out there ? great video i must say

Where did you tap for a reverse trigger for the camera to come on when the truck is in reverse?

You forgot to show how you wired the brake and the reverse wiring to the radio

I keep getting a no signal on my camera and I wired mine up just the same pretty much but still no signal I'm lost ha

hi where can i get an kit like this