Specky, Sir, a top vid👏...for me, this G3 version is great for speed, a real time saver👍

I used mine as others have said. Wash it with a sponge or microfiber type wash mitt and soap, rinse, fresh bucket of soap and repeat process but use the clay mitt and rinse, perfect, worked as well as the clay bar but quicker and more convenient

Gonna grab one aswell as the rest of the range as tbh Im sick of boutique brands and sales confusion, these guys are direct to the point, their compounds cut like mad and do the job, their scratch remover paste is the best on my shelf for deep scratches.

Just discovered your channel from a comment you left on another UK detailers channel (nice one!) I bought this mitt and the G3 spray from Halfords to decon my XK when I bought the car last year. At that time I had never clay barred before and chose that route because I felt if was 'less intimidating' than traditional clay and my XK paint would be safer. I have to say I was not disappointed. This mitt is brilliant and I would wholeheartedly recommend it to anyone especially newbies who have never clayed before. The only two things you need to remember (like all claying) is keep it nice and wet and DO NOT press hard, a very light gentle touch is all you need to lift the contamination and fallout and to avoid marking your paint. I'm now gonna subscribe Specky, great video mate 👍

Lovely Jubbly, a honest review pointing out good and bad points.

Purchased one after seeing this video and have used it on my car which gets washed, foamed and either waxed or polished and it worked great. Used it on a friends daily driver that hasn't been washed in years and even he couldn't believe the difference when i asked him to run his hand over the mitted then non-mitted area of his car. It beats a piece of clay for me on price, speed and performance etc etc.

Just ordered mine, great video, thanks.

I use mine with snow foam. Snow foam the car, rinse. Wash the car. Re snowfoam and use the clay mitt on the snowfoam. Tons of lubricity and if you fill up a bucket with a grit guard you’re more then safe. Cheers.

I use it 4 years. It makes the job very easy. I do not know if its soft or medium synthetic clay but it works fine. You can use it and with soap water aftter the car wash. Nice video!

Very clear and helpful. I bit repetitive in places

Another well made and informative video Specky. My preference is for the sponge type like the Nanoskin auto scrub again better ergonomics than clay. I find I tend to get fingertip pressure with the mitts. Both the mitt and the sponge are easily rinsed if dropped unlike the clay. Keep the videos coming 👍

Looks like a great time saver as I'm about to start on my Chrysler 300C 5dr estate. Definitely going to get one.. ( and a clay bar for those small intricate little places..!!) Always used a very soapy bucket of warm water for the lube. Works great.

Will try this out use to clay bars myself but will give it a go thanks specky

Just got my mit today. Looking forward to using it as it normally takes me around 6 hours with the bar

Using the mitt on my 03 Grand Marquis Park Lane. I have a medium grade mitt, then machine buff w/a fine cut cleaner and then hand polish. I use medium grade mitt because car is 20 yrs old, never been clayed and out in the 4 season elements. First time users? Get regular/fine grade mitt.

Interesting product, will give it a try. Would like to have seen it compared to clay in use on a panel that needed it as there is no actual proof.

Hi Specky,never tried it but always used a clay bar, but I've seen this and will give it a go.👍

Wish I had seen this before I bought my clay bars. Looks a handy idea.

Enjoyable!

I tried the one from CYC. I dont like the lack of "feeling" of these mitts if that makes sense. It's like you lose some of the element of control, and I fear that you could cause more damage if you pick up a stray item on the panel as you dont see as much under your hand. When you have a small piece of clay you have much more control and the paint becomes visible again (at the back of the wipe) much sooner as it has a smaller footprint. I can see these catching on though as you cover panels much much quicker and a lot of people are always in a rush nowadays.

Another great video Mr McSporran, I started detailing way back in the 90's but left it to earn more money. I have just rejoined the party and between yourself and another detailer, you both are great in your honest reviews and opinions for most weekend/personal detailers. I was taught with AG products and love them but with a renault master van a clay bar kit takes bloody ages!!!!! I will definitely be adding this to my collection of rapidly growing items. Could I use AG rapid detailer spray with this as this is what I use??? Keep up the good work mate.

Ive not tried one yet , but i do have one that is unopened. I use a clay block which I find easier to use than a clay bar , as i have big clumsy fingers lol . But once im back to full fitness, I will try out the mitt 😉. Good video 👍

well based on this vid i'll be ordering one, the roof on my Volvo 940 estate will not take so long now :) Many thanks !!!

I have one of these, I like the longevity factor, ideal if your just claying your own car occasionally.i find a clay bar pulls out more contaminants though. Or perhaps that's just because you can actually see them against they white clay. I machine polished and ceramic coated a family members range rover last week and went with a bilt hamber clay, most of the car was ok but loads got pulled of the roof, probably because it's so high to reach nobody bothered to wash it properly

Had one of these mate I found it okay on some panels but then super grabby on others not for me I’m afraid good video though 👍🏻✊🏻

Great video Specky. Might give it a go.

Been using traditional clay for years. Just got a mit and hoping for equal quality decontamination with ease of use and no worries about dropping. Has happened to me a few too many times. 😫 Great video.

Hi, have just got mine, and used it today! Wow! The difference is night and day! Very impressed, how long do you think it will last before buying a new one?? Thanks

is the mitt more forgiving ? i have some heavy contamination that i’m afraid to clay bar because of potential scratching …

Hi, Sorry if this is a daft question, but do you rinse the panel after treating it with this mitt? Detailing is new to me and I’m trying to learn! TVM 😎

Just bought one can you use water 💧 at a looerkeshon or no

I have an Angelwax Glide Pad but only using it on windows. PS how many new words can you make up in one video!! :D

could i use this clay mitt while im doing the 2 bucket wash method as in while car is still soapy use the clay mitt then rinse off ? ive seen in people in other videos do this,what do you think ?

Could I use Sonax bsd as a lube with the clay mitt?

The size of that mit! I bet you get through loads of QD with that mit. Cant beat abit of clay

I just mix a little extra soap in my wash water and do it as part of a normal wash. No issues doing this on my cars, but my cars are silver. Black cars look great but require so much extra care.

How long do u think this main will last

Cheers specky

As a professional valeter I’ve used this in my job as employers won’t pay for conventional Clay because of cost with the amount cars we doing at 30 a week . I rate this highly I have gone 3 months 30 cars a week with the same one very durable great product . I use it in a good quality car shampoo in a bucket as lube works well

Likes to work it with 3 fingers !

So, let me get this right, if you drop a clay bar you should throw it away (obviously), but if your clay bar is dirty through proper use, you should fold the claybar with 'contaminents' including grit, fold it over several times and use again, with the expectation that the contaminants and grit will magical disappear...! Doh, no! Not sure why the industry promotes this method. Use it, throw it away....6/7 cars, Nah!!!

Use mitt with shampoo

Your pushing the dirt back on the. car never move the clay bar forward and backwards only one direction forwards that where the damage comes in.

Spent more time talking about the clay bar than the mitt

Long way for a shortcut . Too much gab - get to the point .

you are better off with sope and water than that spray stoff lol

I had one of those mitts, and my only complaint was storing it. If you put it back in its bag when it's wet, once it dries, good luck getting it back out. However, bought another from another brand (not that the G3 one was bad, it was quite excellent honestly for medium to fine contamination) but this other brand delivers and G3 doesn't xD