2 years later im going to prep the car again and repaint it! Cant wait to show you guys stay tuned🫡

Looks good. I've been spraying and doing metal flake for 40yrs. New flakes are definitely more forgiving than the old ones lol. My technique is, my 1st coat of clear is without flake, then my next several coats of clear is with flake. I finish with 5 coats of straight clear to bury the flakes. After 24hrs or so I sand it with 1,200 grit, then shoot another 5 or 6 coats of straight clear. Then wet sand and buff it out. Did alot of '49 Mercs back in the lacquer era, 600 grit to wet sand the clear. Young bucks today are like WOW 600! Lol. 600 was the finest back then, lacquer compared to paints now are night and day too lol. Anyways I thought I'd share from one painter to another 😎 I'd love to have seen the car outside.

Gnarly sparkle dawg looks good, I’m a body tech, if you tear down the handles mirror and body moldings etc. you have more coverage on detailed areas and less chance of peeling paint

You have to bury that in clear coat after it's done to get that orange peel out of it and then wet sand it and then buff it till it shines maybe four more coats of clear brother

Nice job, and you did it without spending a ton of money, just shows good prep, patience with the application of the flake in clear pays off, Congratulations

Came out damn good......I did the same black/ white basecoats on my nova with the green pearl flake in the clear on my nova!!!!......looking good

Looks sick bro but like imjustkeven said I'd sand it down n add 2 more coats make it look like glass

Been trying to find a paint color to paint my 99 tahoe and as soon as I seen the finish i knew I found what I wanted‼️great video❗️also I subscribed🤙🏽

Brother, I have to say I have been afraid of metal flake all my painting life. You totally owned that car and it came out extraordinary. To have completely fixable orange peel is nothing compared to other jobs that I have seen drips, runs, lines and uneven coating where these boneheads call themselves professionals. That really was a great job. I am ONLY adding this part and please understand that I am NOT a pro but this is what I have been told so many times. If it orange peels and the jobs is not up to your standard, 2,000 grit and level out that job, then add 2 coats of clear and see your results. This all comes as respectful advise but to see what you finished with, OUTSTANDING!!!

You know I watch every video, but you DEFINITELY already knew I'd be watching this video specifically! Cheers bro!

Wow! Looks amazing! I love it!

NO PINCHES MMS!!!!!🔥🔥🔥🔥🔥🔥😍😍😍😍🤤 you gotta show us how it look in the daylight broski

Do you have a supplies list of this? Like what did you use for this and how much did you need to cover the whole car? Im gonna paint my 8th gen civic si 4dr soon and this is the exact look i want. You did an amazing job. How much primer what kinda of base coat how much kandy red paint etc?

How was your experience painting your car inside the garage? Was there a lot of contamination? I’m contemplating doing my paint job myself. I actually want to do a light/medium coverage flake and a pearl topcoat so it’s more like colorshift/chromaflair but in the colors I choose

I liked. Bitchen affect. Fogging was flawless. I'd love to see that in the sun.

I like the technique of your work. 👍

Thanks for the helpful informative vid looking to do this color combo on my 02 Dakota

I want to see a lineup of all the cars you painted that would be dope🔥

Tht finish is 🔥🔥🔥

You got skills bro keep up the good work.

what gun did you use, what tip for the flake 1.8? you like flakes in clear better than in intercoat?

That's dope! I want to do this to my 98 chevy k1500 but not as much flakes just black and red. Nice work tho damn!

I still have my Binks #7 with .086. Metalflake tip, paid. $160.00 😃😃 brand new. The metalflake that is out now is a lot better than what we had, more sparkle and better color, NICE Job. Thanks

I painted my wheels the same color scheme and my x5 is red flake over red. Took 8 coats of clear sanding and another 3 coats of clear

I like it it looks good but I prefer small flakes but that's my preference but other wise the car looks great good job and I like the fact you did it at home.

Spray 2 more coats of just clear it will come out like glass! im about to do this same thing but im using .008 purp-fection

This looks great, can you list all the products you used, also when you touch it, does it feel scratchy or like sandpaper, ? Please let us know

Chingon broski getting better every time 🔥

Looks good. I wonder what candy pearl red over black with lighter mix and smaller flake of a combination of both red and gold flake would look like?

WOW!!!! THAT is a beautiful paint!!! Fantastic!!! I subbed and rang the bell!!! Thank you for posting this video!!! 👍🏻😎!!!

how many coats of basecoat did u use? i’m doing the same red flake on my s14

✊🏼 love these kind of videos

I’m definitely getting my car sprayed this color. I love black but always see cars with silver or rainbow flakes( so boring). This right here tho is awesome

You need to wet sand it and do a flow coat to bury those flakes.

Good looking job man, what paint was that? Valspar like interior paint?

Awesome! Badass paint job!

I love the color. That's exactly what I want for my Durango

Great job. It's best to put flake into an intercoat (base clear) then bury the flake in clear coat.

Hello idol thnks for sharing your painting jobs verry informative😊😊

So im trying to do this in the future but how do i get into this type of work? I just grad and im really interested in this. Plus im hella artistic 🎨

Pro-tip: Never start spraying ON the car. Start on the tape or start in the air right next to a panel.

Hey do a follow up on how the paint is holding up. Great work!!

What tip size you using to spray flakes?

I love the big flakes in paint my uncle Roy had a GT Bradley kit car buggy with the gull wing doors that had a full metallic silver sparkle look to it ....reminded me of glitter disco ball type shit it killed the street at that time this was in the late 80z

Bad ass work I want to learn to paint so I can do that to my Z

Damn dude that’s gorgeous looks amazing I bet it’ll shine like a new penny in the sun ✊👍

Yo fili mad respects bro🤘🏼🤘🏼🤘🏼 but just a pointer I’m a painter after laying the flake lay out clear on its own without the flake it’ll come out clean and as far as the over spray put the box fans on front of you garage with the filters and block it with some plywood in between

Awe man. I watch a few other guys that also do bodywork and paint. But this outcome was especially nice. Love the red flakes on black. The black fades in as you are walking around then as you look at it the red pops out. Nice effects. SprayWayCustoms and custom z warriors is my main attention for bodywork and phenomenal paint. Yours came out especially cool man. NICE!!

What tip on spray gun did you use,also what size of flake

About the nicest flake paint I have ever seen on KZfaq.

Wow! Wish my van looked like that!

Ta perron! Si aplico un poco de candy paint pezclado con los flakes dará otro efecto?

Looks good. 👍🏼

That is a really cool effect--there's a similar video of a technique called "murdered candy" using Createx products but the flakes and pearl they used are much smaller than the flakes you used. I like both effects but definitely prefer the way yours looks. I'm gonna have to try your way but using purple flake. Thanks for posting!

What fluid tips did you use for the primer base and clear?

Nice paint job bro...✊🏿💯🤘🏿 It looks like ruby red slipper a ppg color

It looks absolutely amazing. If I could make one request. Take the car out of the shop and and present it in the parking lot so we can all admire it. This way we can all "OOOhhh" and "AAAhhh" at the fine work you have done. Peace.

which nozzle u used? i will try to use it with a 1.4mm

Hi que pistola usaste para el clear 1.4 o 1.3?

How many gallons or base coat needed to spray a coupe thnakx

Was the first black a primer or a sealer if it was a primer should it have been sander? Cool effect on the finish product

How many coats did you do of the clear? One more coat would of made less orange peel.

Beautiful job thank you for sharing

This got me wanting to start painting la neta

Definitely some backyard DIY STUFF

did you use 1k primer and 1k paint as well? why? i thought that 2k paints and so are more durable and have nicer finish. also , would the final color be different if you used red base paint instead of jet black?

I did the same paint job on my car and wondered how it would look on a grey base. I should have tested it before hand since the car looks black when its not in the sun.

Watch a few low rider painters and the techniques they use to get that smooth glass and high shine paint job. You can really learn a lot these days with all the free internet resources.

What size and type of air compressor are you using? Great job by the way!!

That's well nice I sprayed a bike the same in a much finer flake

I paint in my garage, but small motorcycle parts, I tried a car and yours looks way better than my end result. But I'm a shitty painter and admit it. Keep going looking great for a a garage job bro.

Podrías explicar cuál diferencia o xq es mejor entre jet black y cualquier otra pintura negra azabache? O si es q jet black es otro negro nada más del mercado o existe alguna garantía o mejora al usar jet black ?? Y no mencionaste q tipo de boquilla usaste específicamente para el metal 1.4 o 1.8 o cuál ??? Saludos ..

Looks sick Broski

What would something like this cost on a nissan sentra 4 door ?? In burnt orange color

Simone'. That looks really good.

Bro I’m looking to paint my g35 and leave it like that , but I was told you have to sand down the primer is that true ?

what kind of spray gun are you using?

Buenos dias, disculpa que compresor es con el que estas pintnado?

Mind if i ask what gun you are using for base coat? Im looking into getting a new gun , thanks 🙌🏼

I would have did the hood roof and trunk big flakes and left the arounds small flakes but its decent..good job

Mucho carro para mi lol. Thanks broski!

Great content man

Damn I could tell it was gonna look sick after the first pass of clear lol

Chinnnngonnnnn sigue mi Yonke filli paint n body

Naaaaasty. I’m tryna do this, but a forest green base with gold flakes in the clear coat 😂 would you say layering the clear coat gave the flakes some sort of depth? Or were things fairly uniform?

Wat brand flake did u use

We have a camero called the Moody Blue which is Blue fading into purple can this paint style be done using Blue and purple with the same medal flake you're using on your sedan? Your sedan turned out so dope!

This motivates me to paint my car 😁

Looks Good!

Bro . You just read my mind or something . I have a coupe that will soon be in need

VERY NICE JOB 👊🏾

Great job 👍🏾

Was that really valspar paint you were using from Depot

Puro fili paints. Came out clean hopefully it pops when you color sand it. If you want the orange peel to go away wet sand it with 800 by hand and then Re clear it. But again awesome job

It looks good

Orange peel is never “normal” or acceptable on any paint job final product I don’t care what size flake someone uses. If there’s orange peel, the job isn’t done. Just one person’s honest opinion

You will get a way deeper job if you sand then put two more coats of clear repeat twice

What a pretty car.

Sick paint bro

Se puede mejorar aplicando otras dos capas de clear al siguiente dia despues de lijar con grado 800. Buen trabajo y el dueño del carro contento.. eso es todo!!!