Galaxy A51 (A515) Screen Replacement Guide | Frame Swap

Galaxy A51 (A515) Screen Replacement Guide | Frame Swap | Aliens

Рет қаралды 9,943

2 жыл бұрын

Today I'll be diving into some alien research inside the Galaxy A51 while I replace the display. I'll show you how to replace the display and frame assembly on this one, links to parts and tools below:
*Please note the model number when following this guide, there is a different variant of the A51 that is wildly different from this base model*
I am not responsible for damage or data loss caused by you to your device, this is not a guide for beginners and reasonable safety precautions should be followed. Attempt this repair at your own risk.
Parts used:
www.mobilesentrix.com/oled-as...
------------
Tools:
Technik Tweezers (The only kind I'd recommend)
amzn.to/3KPS6EB
Precision Screwdriver Set w/ Security Torx for consoles
amzn.to/33SEPuV
Get my silicone work mat here:
amzn.to/3Cr7ofO
Curved Pry Tool (for separating adhesive):
www.mobilesentrix.com/qianli-...
(Links are affiliate links which support the channel, see the channel's About page for more information regarding affiliate links)
------------
Music:
Somber Love - Michael Drake
Licensed from Sonata Media

Пікірлер: 6

@tophatrr_2142 2 жыл бұрын

These are always soo satisfying

@heatherholdren4490 2 ай бұрын

Ty so much for this video, it's the best one out!!

@TapticDigital 2 ай бұрын

Thanks! I’m glad it was helpful

@sgtsnafu4432 6 ай бұрын

I am repairing this exact phone.. Seen your video and ordered a heating mat like yours (did not know they existed). What temperature/time do you typically set the mat to?

@TapticDigital 6 ай бұрын

Because the back of this one is plastic you’ll want less heat/time than normal. Start with setting it to about 40c, wait about a minute and feel the back side. I wouldn’t go higher than 50 or longer than 1 minute at a time. Whenever it feels “uncomfortably warm” like you wouldn’t want to hold it for a long time, it’s just right!

@sgtsnafu4432 6 ай бұрын

@@TapticDigital That is the insight I needed, thank you very much..! Will let you know how my first time using it goes..