Thank you for watching

Thanks! your videos helped alot. Ive transitioned to creating game themes and video marquees since. Cheers

Thank you 🙏🏻

Glad it help. In what way if you dont mind me asking? Thanks for watching

Thanks

Hi! Thank you and thanks for watching.

Will do!

As far as I knw PC is needed as the servo sticks work with ledblinky. Idk if ledblinky can be installed i a pi4

I would personally stay away from their fully built units. I bought the cabinet from them, and everything else was separate. Buttons were bought from ultimarc (list in the description), PC from Xidax, and everything else from Amazon.

Yes, I bought it from Dave. I might be mistaking, but It was my understanding that Vitrolight was manufacturing these. I might be wrong. Regardless, Im happy with my purchase from EHA.

Grazie

LedBlinky configures all MAME games. Every other console or game has to be manually if I'm not mistaking. For the arcade I used a flat pack from Game Room Solutions.

Nop. Been doing it manually all this time XD. Im sure there is a way but I havent bothered to

@@tekkamanblade2244 Thanks for the reply. The only way I am currently able to do it is by powering it off (holding the button for x seconds) when it's in that position. However, if it loses power and comes back on it's always on bluetooth. So it defeats the purpose there. But yeah, one press to move it aint that big of a deal! The amp is really nice. Thanks for the suggestion!

Hi! What you are seeing is VPX’s backglass on the monitor thats in the panel and I have the dmd on the active marquee monitor. Those settings are done through popper. If you notice later im the video when I demonstrate the servo sticks there is only a desktop background showing in the cp. BB only supports 2 screens and it wont have three screen support for the few who want it.

@@tekkamanblade2244 Gotcha. That makes sense. I appreciate the info. Once again, nice work!

This is BigBox, not HS

Hi! I purchased then through Ultimarc. Thanks for watching!

Its not

What do u mean?

They arent pleasant but Ive never had an issue with quality. Design? Yes, but it was my choice to purchase. Thanks for watching!

Hi! You can find them in Amazon. Thanks for watching! uxcell 50 Pcs Circuit Board L Shape Type Insulated PCB Spacer Plastic Feet 20mm Supporting Height with Screw www.amazon.com/dp/B01L6Q5F4C/ref=cm_sw_r_cp_api_i_XXAXETH180VV5APG1NF8?_encoding=UTF8&psc=1

Samsung UN7000-ish series. Cant remember exactly. It fits in the arcade but the vesa holes dont align with the mount GRS sent me. I had to make it work soo… yeah keep that in mind.

@@tekkamanblade2244 ah OK. Thanks for the info. I may have to research some other options with better Vesa holes. If you don't mind me asking, how much did you pay for the marquee? I see it on ebay, but seems pretty high priced.

@@dblanchard81 more than I shouldve. It was pricey. I bought it from xtreme home arcades

Noted on my to-do-list

GO FOR THE 50”!!!!!!!!!!!!!!!! (Literally Yelling)

Crt emulation gets you 90% there, hlsl or crt royal do a really good job of emulating a crt on an LCD. CRT break all the time and the maintenance is constant, not to mention how hard it is to find decent ones.

I've done that but my cabinet is not this advanced... More the ultra budget version with old parts I had

Thank you. Samsung 43”- Class 7 Series

I want to build one, and I'll for sure go ham lol. My livingroom theater is 15,000w and I have things like a 18" DIY sub in my bedroom pushing 2000w I might do something crazy like have speakers hanging off the back of the cab that go overhead to give you rear speakers.

@@ViciousXUSMC That's exactly what I did. I got 2-6x9 in the front, 2-4" speakers at bottom front, and 2-4" at top rear, plus the 8" sub.

Not that I am aware of

RGB buttons compatible with an ipac io which talks to the software ledblinky. Ledblinky handles the animation of the buttons. The 7 inch screen can be found at amazon and it is fairly cheap. Thanks for watching!

@@tekkamanblade2244 thank you . I'll look into it .

BTF-LIGHTING WS2812B RGB 5050SMD Individual Addressable 16.4FT 60Pixels/m 300Pixels Flexible Black PCB Full Color LED Pixel Strip Dream Color IP30 Non-Waterproof Making LED Screen LED Wall Only DC5V a.co/d/anUeJ2S

@@tekkamanblade2244 thank you

There wasn’t an option for it back when I ordered. They didn’t seem interested in the idea and said they would have to buy cupholders to find out the size of the hole they would need to make. Plus it was $80 PER alteration according to her. The lady didn’t even know what a stream deck was and that’s when I stopped asking.

@@tekkamanblade2244 😀- $80 is still a grip for EACH individual change, but I can see why they would charge that since they're not offering a FULLY customizable service for each enthusiast. But I'm shocked about the quality in the alignment issue on the control panel; 🤦‍♂🤷‍♂ Do you happen to have the link to the sub, amplifier, speakers, and spacer you used? I know the video doesn't do it justice, but it sounds pretty good through the video.

@@IAmWarN in the description

Will do! Its down the road. I just purchased GRS’s 43” pinball and once Im done building it and reviewing it Ill get the Sindens. Thanks for watching!

@@tekkamanblade2244 sounds good! I'm interested in the GRS vpin as well. I subbed and will watch all your vids. One more question: do you know if GRS will do cutouts for players 3 and 4 joysticks to point up to the screen instead of angled in?

@@dblanchard81 From experience they dont deviate from their designs. You can always ask them. Maybe you’ll be lucky.

@@dblanchard81 Their site has a modern cut 4player control panel that is up not at an angle, but this dude said that the control panel may not work with the set for the larger display.

@@Dilemina Hey Dean, sorry to bother you 8 months later on this but just saw this. I'm looking into getting the 50" cab, what does it mean when you say it might not work with the control panel may not work with larger set like a 50" tv? What does the set have to do with the control panel?Thanks!

They suck with CS. Its a Samsung TV

Not a bad idea actually. I will start after Im done building my vpin. Thanks for watching and the suggestion 😃

videos? If u mean while playing VPX then its done through pinup popper during the initial set up and having a puppack. If you are referring to videos playing while in the main menu or during game play then this is done using the third screen plugin by superrob3000.

@@tekkamanblade2244 Thanks I believe it is the plug in by superrob3000, I saw he had it for Big Box I need to check to see if he has something for hyperspin. The Batman 66 gameplay video is awesome.

Measure twice and cut once. I practiced with some extra wood I had. Used a successful cut to draw the template. Drilled one hole in each corner to feed my jigsaw blade through. Make sure you use the blade for laminated wood. I got mine in Home Depot. The cutting teeth face up instead of down. After the cut I sand it down a bit until it fit. Thanks for watching.

@@tekkamanblade2244 Thanks for the advice brotha

I followed danielspies. Look for him on YT

There is no up or down because u configure the joystick to whatever you would like.

What do you mean?

I think its a function of LEDBlinky

Yes, ledblinky does it when u generate your mame.xml

Burger Time. I think Joust, Mario Bros, Tetris and Bubble Bobble as well, but suppose you can get away with 8-way.

Launchbox/Bigbox

What theme?

@@AmbientoftheFel Unified Redux

Thanks. The program its call LEDBLINKY. You could have it for every game.

@@tekkamanblade2244 and LED Blinky also gives the audio output of which button has which function or just the blinking?

Both

@@tekkamanblade2244 Thank you so much for the Infos!!! Greetings from Germany

Sure, shoot me an email. My email is in the comments in one of my videos. Can’t remember which one though

Amazon. Its in the description in one of my videos

@@tekkamanblade2244 Thank you

Yes

Exact model number i couldnt tell u bud. All i know is thats the 43” version. Sharp image great colors

Thanks. There seems to be a common factor here… Thanks for watching

What does that even mean?

Not that I can recall

@@tekkamanblade2244 I think you mentioned Daniel Spies KZfaq tutorials for button help. Great cab and vid! It's between Gameroom Solutions and Extreme Home Arcades for me. Researching like crazy 🤪

Depends on you and what you want. Fir this same cab you looking at 4-5k

@@tekkamanblade2244 thanks. I really like what you had built. It's a really good design. 👍

For 4K you can get a well built EHA arcade,

@@shortclips508 agree to disagree. The megacade is $5850 for a 4player + 50$ custom graphics+ $240 led lit 4 player joysticks+ $350 led lit 4 player buttons + $175 adjustable rgb trackball+ $50 to $250 joystick+ $150 spinner= thats well over $4k probably the reason why you bought a pedestal to begin with. EHA is cool and the community is tight. No shade- just my opinion. Not to mention all the issues with the drive -mainly because of hyperspin which explains the migration to BigBox aka Omega- which looks awesome btw

@@shortclips508 No you can't. Tekk's build is more like an 8K EHA build. Give me break. EHA, LMAO.

No. Just the flat pack with screws.

So you had to buy the spinner flight stick and light gun . What was additional price.

Yes

Well it happens to many ppl. Tbh Ive had better luck with them than others. I am no finishing my vpin cab that I just purchased from them and everything was good in terms of condition and shipping speed. I just want to get everything done before reviewing. Thanks for watching!

You should rewrite this

Did you find some blue prints?

I agree, she is rude. But I have had a fairly good experience with GRS. Im happy you are enjoying your pedestal. Thanks for watching!

I've had a great experience with GRS. Nobody came off as rude to me. Situational I guess. The humming from your home screen has nothing to do with their Cab. You built it. GRS does not ship fully assembled machines. That's on you. You fucked something up. This isn't an out of the box plug and play kind of thing. You have to have realistic expectations. If you want out of the box playability buy an Arcade One system and be even more disappointed with laughably shit design and garbage components. EHA is extremely over priced for what you get. I guess if you want an out of the box overpriced solution then sure. A fool and their money. I built my 4 player cab via GRS that will destroy any EHA system for half of what they charge and the quality is spot on.

@@travisfury4885 show it off

For anyone thinking in buying from GRS, it's best to just buy the cabinet and skip the components they sell. Less of a headache if something goes wrong. Buttons, audio, pi, etc source yourself.

@@arthurm7029 I agree

Daniel is a talented builder. Thanks for watching

You want to take our childhood nostalgia wet dream and stick it in a phone??? What you on bud? what are you on!

@@Pinseeker01 If you move a lot, yes. And I'm on common sense, not sure what you're on!!

@@jorisbonson386 I'm on nostalgia baby! Maybe you're not old enough to have that for arcade games perhaps.

@@Pinseeker01 I'm 44 and yes I have a ~$4000 Attract-Mode based upright arcade system with Gun4Air, full RGB Ultimarc everywhere, video marquee and coin acceptor etc - BUT I don't move a lot. I also have a phone packed with retro games, and if I were moving all the time I can see how ridiculous it would be to keep the upright - as much as I love it she'd be gone.

@@jorisbonson386 I'd take it with me but I hear ya...

Funny, I actually love the control panel, especially the rounded corners. Lots of room for 4 players, otherwise you might be smelling someone's nerd sweat on a smaller one 😂

Just 5k Jesus I could build it for 1.