GameCube Blue Retro extra tips and tricks on wiring

No video

GameCube Blue Retro extra tips and tricks on wiring

Рет қаралды 1,444

Laser Bear Industries

Күн бұрын

This video is to help users that are stuck on the wires and how they are connected.

Пікірлер: 24

@mbe102 Жыл бұрын

I'm so excited for this thing

@wasaagamusic Жыл бұрын

Does this work with a GC compatible Wii?

@bandai1983 Жыл бұрын

Only my powera switch GameCube controller works correctly. All other controllers and adapters I have connected no matter if it's switch or PC x input or d input mode they have their button layout swapped. How do you fix that? I have messed around in the settings config and no luck. This happens to every blue retro device I have connected to. Amazing product btw. Also, I heard the power a has analog triggers that only work on PC. Be nice if blue retro took advantage of that if it were true.

@DaMarakuHD Жыл бұрын

Is the blueretro able to work with more then one gulikit kingkong 2 pro? It works fine with one so far but since the cite says it only takes one switch controller at the time I wonder if it’ll work with 2 kingkong pro since it has multiple modes

@LaserBearIndustries Жыл бұрын

If it has an x-input mode you can use 4 without any issues. Switch protocol has an issue the creator has not been able to isolate. He did just get digital only switch controllers to work with more than one(SNES/NES online controllers) but regular switch controllers are still not playing nice.

@DaMarakuHD Жыл бұрын

@@LaserBearIndustries I’m sorry for my ignorance but what is x-input? And how can I check?

@LaserBearIndustries Жыл бұрын

@@DaMarakuHD no worries x-input is windows controller protocol. On the Gulikit hit the mode to the windows icon with an X under it, not the D. X-input is mostly universal Blue Retro should have no issue reading it. The button mapping on the face buttons may be wonky and need changed in the web ui though.

@danielyeetman Жыл бұрын

Sometimes when turning on GameCube and Xbox one controller it takes a couple resets/tries until it will actually pair. I turn the GameCube on then a second later turn on controller. I don’t use the controller for anything else. Any advice to get it first try all the time?

@LaserBearIndustries Жыл бұрын

Is the Xbox One controller up to date on it's firmware. Older firmwares have weird issues like this.

@ratchetclank9474 Жыл бұрын

Hi I know it's kind of silly but what would happen if you have blue retro installed but choose to use only wired controller and not any wireless controller? Would it stuck in pairing mode indefinitely?

@DragonProtector Жыл бұрын

Nope

@DragonProtector Жыл бұрын

Mine been fantastic. Need better latency though. Super monkey ball 2

@pkdeathrow3142 Жыл бұрын

I just installed the board and I am having an issue with the calendar date and time data keep getting lost after turning off then turning on the console. I am not sure on what is causing this and whether or not there is a fix to this.

@LaserBearIndustries Жыл бұрын

We had not run into this before, but it may be a hardware issue. Reply to your order confirmation email or our contact page and we can see if we can get you a fix

@troymeredith521 Жыл бұрын

Does any of the instructions tell the user to actually install the battery on the board first?

@pkdeathrow3142 Жыл бұрын

@@troymeredith521 the battery was already installed, I even changed the battery in case if it was a dead or defective battery but didn't fix the issue.

@pkdeathrow3142 Жыл бұрын

@@LaserBearIndustries ok I'll do that. A shame that I may have a defective copy.

@troymeredith521 Жыл бұрын

I just finished installing mine actually and I got some weird date resets too. First one was the standard reset (new battery, so of course). Then after turning it off and back on later, I got 7/15/2114, 13:49:00 as the rest date-time. Strange. lol. Gonna test it more to see if the date/time sticks.