oh im an idiot, i bought this thing years ago and I am just now getting around to installing it. But i have an PSDigital and an XStation (not a MODE) lol. I guess i could just find 5v some where and connect the fan to that?

Just a note to everybody who just got their version three. It does not have an antenna port and therefore does not come with the antenna board. It seems pretty obvious based on the design of the new chip, but some people might get thrown off at first.

Just a note to everybody who just got their version three. It does not have an antenna. It seems pretty obvious based on the design of the new chip, but some people might get thrown off at first.

Tried to repair a few pads with these kits, but it is far from perfect... impossible to do combos... best solution is still to clean the (original microswitches in the) pads often and before they get too dirty...

20 fucking minutes. Jesus christ, have you ever heard the phrase "this could have been an email"?

Why do I have to watch this video? Oh, it's because I was sold a lemon and am now forced to re-assemble it myself despite paying extra for a drop in solution. FFS do better than this shit.

Thank you Greg for the great mod! I had a tough time starting off, but everything flowed nicely thereafter! 🎉

I am having a hard time choosing the type of cart loading mech I want for my modded NES I am about to work on, and so far, this one I like the most

Sadly is Out of stock 😢.

Just got my kit (with a simplified connection that does away with the ribbon cable). It went together very nicely with the help of this video. Works perfectly with my Everdrive N8 Pro as well. The new connector in the kit must have resolved the issue that others had reported. Thanks!

What are the two small screws used for in the flex kit. They don't thread into a nut

You just gained a loyal customer - I pre-ordered the slot master & held off on assembling when I saw chatter about compatibility. I just got a notification today that a shipment was being prepared, went to your website and saw the updated listing with the flex cable. I'm IMPRESSED by how quickly you got on this and took the extra step of sending revised parts to pre-order customers. You have locked down the best version of this mod with your eject mechanism & flex cable! The Laser Bear site has first consideration on all my future retro gaming purchases! 💯

I can't believe these are about to release!

I got a replacement fan that has a longer cord, its a pain in the ass to close the console back up with all these extra cords lol

do the 8 missing connections effevt everdrive functionality? Githubs readme doesnt really state what theyre for, but my everdrive now crashes on all games; works when i put standard 72pin back in, and the few regular nes games i own work flawlessly. If so, any chance you got a part number for digikey/mouser for a good connecter/terminal that fits thr footprint?

Excellent design!

Hey that looks genius. I have an N8 with a Blinking Light Win. That uses a top loader style internal connector, which to me is way too good of a grip on the cart. Can this be used alongside that?

may as well pick this up. If it means better connection. loosing connection was pissing me off.

That ejection movement is such an mechanical wonder. Great job!! :)

First!!!!!!!

I have a question, is any firmware stored on the chip/IC itself? I got a dumb special mainboard with a busted chip (with a regular RTD2556), and was wondering if only soldering on a new RTD2556 would be enough. Or do I need to flash the MCU again? I thought it stored all the settings on an external SPI flash. Also couldn't I directly backup the data by using an SPI reader?

Wanted to order a couple of these but no paypal !

What power supply do I need? The only one I can find linked is one on amazon that is no longer for sale...

Thanks!

I bought the kit and put it together with the help from this video im currently using it on a twin famicom and it seems to start pressing random button presses at random times whether i use a snes or nes controller. For examble bubble bobble player 1, when ever they jump id say about 2/5 of the time they'll shoot a bubble while jumping even though the jump button is the only one being pressed. Anither example would be mario 3 using the SNES controller on the over world map one press of the right or left dpad will cause the opposite dorection to bebpressed or even somwtomenthe b button to be oressed as well. Do you have any idea what could be causing this? I love this product and im hoping i can find a way to correct this inconveniences. Thank you for a great product.

are there anymore updates on this as i cant seem to find any.

I tested this adapter with a Tim Worthington N64 RGB mod with jumper 5 bridged for Component output it works great. I tested with two different generic Wii cables and both worked fine on the component input of my old Samsung LCD. Waiting on a Retrotink 2x to test with that.

why do the sync rates stop at 63mhz ? alot of industry, medical and Dos based equipment ran i text mor 80colum 70mhz and there are very few monitors that support that these days. is it a limitation of the chip or the fact it was never really intended for VGA standards.

If you want to use this on the HVC-001 console, you must use a riser underneath the console (i.e. the Famicom Disk System)...

Absolutely can’t wait for this! Any updates?

Do you know if the Familcom/Twin Famicom port outputs enough power to use 1 or even 2 8bitdo 2.4ghz controllers with this adapter?

I would love to see the translucent green to come back.

Works with wii u pro controller?

Would this work with a GC that doesnt have the GCDual mod?

I just bought one, it should be arriving this week, i'm so exited for this!! 😋

Does it support the use of gba link cable?

With this pack, how does the outer shell with the LED battery level wire up? Does it go along in with the battery?

Does this work with a snes?

The tolerances are too tight. I couldn't push the switches far enough back against the casing, so when I put the springs in, they are constantly pressed down, I did everything to try pushing it flush and broke the switch, now it still isn't flush and I can't take it out. So now I just wasted my money on something I feel was no fault of my own

The NESRGB outputs RGB video in a way that’s already spec’d for consumer devices… meaning you only need a straight cable with no components. Meanwhile, a NTSC SNES spec multi-out cable would have 220uF capacitors on each RGB channel. Until recently I thought that you had to change some components on the NESRGB to make it output SNES-spec RGB for SNES-spec cables through the multi-out… like remove some capacitors from the board and bridge them. I must’ve been thinking of some other mod accessory because none of the multi-out installation instructions I can find mention the specification mismatch except for the ones installing a Genesis/MD2 multi-out. Is this somehow not a consideration for properly made SNES-spec cables? I ask because according to the NESRGB instructions the straight cables I made are correct and I don’t want to break them open and rebuild with capacitors if I don’t have to.

Just saw a preview on SpawnWave. Is there an email update/waitlist I can sign up for?

Are you guys planning on making any more of these? I'd really like to make one! I have an iPad 2 screen, but I can easily find a 3 if need be. I'd love seeing this same concept but instead of a PC monitor, It looks like a late 90's/early 00's era CRT TV.

How is that bridge in 1 of the 4 pads gonna prevent tearing all the others them apart?

Working on ths now do hopefully you answer soon. Lol. Im at 14:16 in your video Should i be getting continuity between the b+ and b-? Is that notmal?

Waiting on this

i didn't even know you had a youtube channel! Thanks Collin. Great design.

You getting those Nomad battery packs in soon?

You got a sticker with yours?!