GAN 14 PRO - What changed?

No video

GAN 14 PRO - What changed?

Рет қаралды 26,392

4 ай бұрын

BUY THE GAN 14 PRO Maglev:
speedcubeshop....
CUBESCORE: bit.ly/cubescore
SHOPPING: speedcubeshop.com
SOCIALS:
Instagram: / speedcubeshopofficial
Discord: / discord
Twitch: www.speedcubesh...
Facebook: / speedcubeshop
Twitter: / speedcubeshop

Пікірлер: 123

@SpeedCubeShopOfficial 4 ай бұрын

See how the GAN 14 PRO ranks against other cubes on CubeScore: bit.ly/cubescore

@JbPerm-fv1gp 4 ай бұрын

I feel the reason it comes so loose out of the box is the same reason apple sets the computer angles at there stores so awkward. When you adjust the cube it makes you feel closer to the cube and like it’s completely made for you.

@RealKevinPlays 3 ай бұрын

That's pretty cool

@honguyenkhanhduy 3 ай бұрын

wtf

@Gnnnnnbnnn 3 ай бұрын

Actually, the tool for removing the caps is very useful. because , gancube that I have was damaged due to me pulling the caps too hard.

@SpeedCubeShopOfficial 3 ай бұрын

It’s definitely useful! Just a tad inconvenient to have to have it nearby

@mikebozik 4 ай бұрын

Yeah, love the change up in format. These two are really close, it would take some time setting up and solving to really get to an answer... But I do like my cubes set up as loose/fast as possible.

@WyattZimmerley 11 сағат бұрын

If you don't want the center caps to break just be really carefully with them.

@VCuber047 3 ай бұрын

I didn't expect the cube to be loose out of the box, also I liked the new tool! It saves our fingernails! Awesome video

@mastercuber3141 4 ай бұрын

I Preorder the Gan 14 maglev pro🎉😊

@JustAnotherPerc 3 ай бұрын

I did too, like 2 weeks ago

@ESLAMALJREW37 3 ай бұрын

Rich people problems😅

@xklamier 3 ай бұрын

I own and have used every GAN flagship released, and I’m one that actually enjoys the regular 14 quite a lot after getting used to it. (GAN’s are generally a looser and faster cube out of the box) …But the 14 Pro is the first time I thought I actually got a defective cube upon first turns due to how loose and uncontrollable it was. Even on the tightest setting available, I still feel it is too loose. This is coming from someone who likes fast cubes. I feel GAN needs to tune the range of tightness on their newer cubes. The stock feel out of box should be the loosest settings possible and only tighter all the way down from there.

@MazezCubing 4 ай бұрын

ngl I just want the 5x5. NOTHING ELSE MATTERS

@myweirdsecondchannelwithap9070 3 ай бұрын

I'm just getting back into cubing, wasn't the gan 5x5 supposed to be released in 2023?

@MazezCubing 3 ай бұрын

@@myweirdsecondchannelwithap9070 back in 2021 pretty sure 🫣

@maxim7685 3 ай бұрын

i like the new format and the video was really great. only thing i want to point out is the music was a little loud and at the very start was honestly quite annoying and seemed like someone was playing a piano for the first time. i feel like music at around 5:24 fits a bit better.

@CubingEmperor313 4 ай бұрын

Nice videos! My normal fourteen broke sadly.

@TheNerdyCube 4 ай бұрын

Yup

@idkmybffjv 4 ай бұрын

Imagine if you spent 80 bucks on a Gan last year and have to pop your center caps off with your fingers like a peasant 🧐

@wilsonchow7681 3 ай бұрын

Such a nice review, keep going guys~

@AColdCuber 4 ай бұрын

Wow the Gan 14 pro is amazing!

@theshirtlessgamer8628 Ай бұрын

crazy that i learned cubes by watching CAM before he had even started his store

@SpeedCubeShopOfficial Ай бұрын

That’s cool! Thank you for your continued support :) ~Noah

@zadynplays8047 16 күн бұрын

nice Cartier love bracelet, see the brushed finish Cameron?

@flavored_1 3 ай бұрын

Gan 15 Pro Maglev Ball Core Enhanced Super Air 356 XSR ABC V2 When??? (only $4000)

@Usuario01997 3 ай бұрын

Nah ball core would make the magnet strenght worse and the cube heaviee

@ikecoldd2 3 ай бұрын

@@Usuario01997 Bro how bad is your sense of humor?

@Justarandomguylol654 3 ай бұрын

Wow, that’s cheap!

@FriskyPotat0 3 ай бұрын

I actually panicked when cameron started swivelling them around on the table like BRUH ur literally not gunna be able to tell them apart but then they mentioned centre caps 😮‍💨

@mattj7245 4 ай бұрын

Hey camren, I’m wondering how do you get replacement parts from speed cube shop?

@juzfun2965 3 ай бұрын

They uploaded this vid jus after i bought the gan 14 (normal)

@JakobDam 3 ай бұрын

I have north of 5,000 solves on my GAN 14, which I bought right as it was launched. I made a review of it too - but I've never ever had it popping on me. I've tried a bunch of different settings/combinations, but it's probably due my turning style being lighter than the people who've had it popping...?

@donkeycuber 3 ай бұрын

I used loose cube to get into OH and liked it a lot. But never ever for 3x3 cubing. That's crazy fast.

@TheRealNobey 4 ай бұрын

Gan 14 Pro ❌ iGan 14 Pro ✅

@lucaxtshotting2378 3 ай бұрын

hah! because it's an interface! funny!

@birdyflyer 4 ай бұрын

what changed: the usual... more magnets, more adjustment things, more money

@OlgaFyodorova 3 ай бұрын

In this case, actually no. It's just the caps and the torpedoes.

@GlydLev 3 ай бұрын

14 pro is cheaper

@ManpreetKaur-rx5pc 2 ай бұрын

“More money”

@WildWildWeasel 2 ай бұрын

So, for this upgrade (gave away my older cubes to my younger brother, sister and nephew since they showed interest and want to join me) money isn't an issue, so which Maglev variant should I go with? 12, 13 or 14? I'm more inclined towards the 14 Maglev Pro, but I wanted you guys' opinion 😅

@Olliefur11 3 ай бұрын

i love your shop🤩

@TheNerdyCube 4 ай бұрын

Nice video quality

@Cubingdash2020 4 ай бұрын

Yo I remember you from discord

@Royaled_King 3 ай бұрын

whats next? Gan 14 Ballcore Leap? also gan 15?! what

@BedwarsTryhard111 4 ай бұрын

Instead the Gan 15 Maglev they released Gan 14 Pro Maglev x-x

@JoKachowthethird 3 ай бұрын

For those who bought the Gan 14, could we send you the old one for the 14 pro? Mine is in good condition still.

@OlgaFyodorova 3 ай бұрын

Man, to say the cube is too fast, you have to test it on the tightest spring/maglev setting, and that's 6 for Gan 14. You used what, 3 and 3? That's definitely really loose for Gan 14. I main a Gan 14, and I use 1 for distance (tightest) and 4 for maglev, sometimes 5. It's fast but controllable enough for me. It doesn't pop on 1 or 2, at least with my turning, but at distance 4-6 it does. I don't really recommend the Gan 14 because for such a price a cube must be flawless. Even though I main one, I can't say it's worth the price - for me, it's marginally better than, say, the RS3M v5 BC, but the price is a few times higher. I don't recommend upgrading to the Pro unless you really really really like the feel of the cube but absolutely want to use it on loose travel distance setting like 4 to 6. And if you want to take advantage of the discounted price, choose Pro if you know you like loose distance, and choose the regular 14 if you know you can turn pretty accurately and can enjoy a Gan cube on pretty tight distance. In any case, Gan cubes aren't the most forgiving, and if you want a really forgiving cube, rather get a Moyu.

@SpeedCubeShopOfficial 3 ай бұрын

I see your point but comparing to the same settings on the GAN 14 it was surprising how much faster the PRO is.

@OlgaFyodorova 3 ай бұрын

@@SpeedCubeShopOfficial My point is, if it's reasonable speed at maglev setting 5 or 6, then it's usable. And it will slow down with breaking in too. Plus lube.

@Jacob-anims 3 ай бұрын

I feel fan just added small tables in center and made it longer and they added a new tool to we pay >:(

@javeywavey 3 ай бұрын

center cap dual functions as a pizza saver

@ayanami_ayn 4 ай бұрын

SCS please make a review video on the SoupTimmy YS3M 🙏 There's already a video review of YS3M, but not on the SoupTimmy version yet.

@TheMessyDeskxyz 3 ай бұрын

I really only almost had a pop once on the 14 (non pro) because I was turning really really badly and had new tensions/distance settings and was not used to that on top of the sloppy turning… Might skip the pro and wait for the 15 instead….

@skellq4385 3 ай бұрын

I agree.

@Ppretycos 3 ай бұрын

I was wondering if you had plans on have a Ghana interface on your shop

@Mafiooso686 2 ай бұрын

bruh I just bought the gan 14 pro and now I see this

@cubingpan 3 ай бұрын

the pro is made for yiheng wang and helped him to get a 3.47

@siyabonganobela2859 3 ай бұрын

The moment I saw that adjustment tool I knew this was a joke

@user-lb3go2tc8h 3 ай бұрын

Literally iphone of cubes, specially names

@egecairli5324 2 ай бұрын

Whic one is better? Gan 14 or weilong wrm v10?

@SpeedCubeShopOfficial 2 ай бұрын

Since cubes are based on preferences, there isn’t a “better” option. Personally, I would pick the WRM V10, but it all comes down to which one matches your turning style better. ~Noah

@ffdf-uc1oh 3 ай бұрын

hello scs,i want to ask something, my cube's corner piece got broken.Could i buy only that corner piece?

@SpeedCubeShopOfficial 3 ай бұрын

Check our help center to learn how to request parts 👍

@user-rr4mu7kk2w 3 ай бұрын

I like super speedy cubes

@ZACATAK77 3 ай бұрын

11:29 bro said the scramble was zesty 💀💀💀

@ZACATAK77 3 ай бұрын

Nah how tf did y'all even find my comment, and why did you guys heart it💀💀💀

@Ganball97 3 ай бұрын

this is one super 3x3

@subzero.cuber47 3 ай бұрын

Money. The change was the amount of money it cost.

@namanienie123 3 ай бұрын

i feel like gan lost its shine at about the 12 or 13

@RoyalMidou 4 ай бұрын

Stopping kids from saying first

@idekwhatoputhere 4 ай бұрын

thanks

@RoyalMidou 4 ай бұрын

@@idekwhatoputhere just realised no one tried saying first so ... useless comment but it's ok tho unjoy the video mate ❤

@fire_orc383 4 ай бұрын

this is just as annoying, put an normal comment if you want to stop them

@RoyalMidou 4 ай бұрын

@@fire_orc383 that's why i did it ... to annoy those who write first 😅

@mangocuber 4 ай бұрын

@@RoyalMidouFirst (I gotchu)

@ZafirAhmed-ge7bl 4 ай бұрын

Good cube!!

@DRSmith-fz4qp 4 ай бұрын

As much as the Gan 14 is cool, the price is through the roof.

@kashtynprince-catcheway 3 ай бұрын

Hey is my tornado v3 coming! lol😂

@skellq4385 3 ай бұрын

Just to say. Be very careful with the V3. It has worse durability compared to gan and will break much easier. I have dropped my gan 13 from 4+ feet over 25 times. It is kinda damaged inside and has a decent amount of noticable scratches. However, nothing too bad. (I have a gan 14 now and i am being super careful with it, it has no scratches.) Tornado v3 corner magnet broke after dropping it from like 2 feet on accident once.

@thesphyrth 3 ай бұрын

All this is telling me is that even Gan is running out of ideas to innovate. We are at the era of refinement.

@Cubinating 4 ай бұрын

Hi speedcubeshop! Can you give me tips on how to be sub 25? I use CFOP and know two look oll, 12 pll cases, and intuitive f2l

@mattj7245 4 ай бұрын

I’m not speedcubeshop, but I think you should learn full pll. I’m almost sub 20, and I’m full pll, 2 look f2l, and not great f2l. In other words, practice practice practice. Hope this helps.

@Cubinating 4 ай бұрын

@@mattj7245 thank you so much!! I’m in the process of learning full pll and oll!!

@Cubinating 4 ай бұрын

@@mattj7245 also you’ll get sub 20 soon 😉

@LowchinChinny 3 ай бұрын

learn full pll, make sure cross is 8 moves or less, insert f2l pairs into the back, try to have good recognition, don't rotate too much for f2l, every case can be solved with 1 rotation or less I think, do untimed solves where you try to figure out efficient ways to insert pairs (some of this stuff might be kinda advanced for sub 25 idk it's been a while since i was around there but this should work) hope this helps

@Cubinating 3 ай бұрын

@@LowchinChinny thank you!

@Ppretycos 3 ай бұрын

Hi speedcube