Damn, i know this video is 3 years old but, i want to get a Toyota pick-up because of this man

I have a 93 that I am fixing up myself as well, just did an overhual on the motor, thing runs amazing for having over 140,000 miles on it body is as straight as yours is, gonna go for a different look though. great vids man really detailed explanations (helped tremendously!) keep em coming!!!

90 bucks you can't go wrong. Clean yota!

Looks so cool! I love the 90's pickups

Clean and simple. Great work inspired me to build one of my own

not a bad look man! never would have thought crown vics would go so well

Thx this video was a huge help i bought the bbs stickers as well on amazon great touch wheels look great on the toyota pickup

Nice and clean look! 😎👍🏼💪🏼I have a 2002 tacoma and planning on putting 5 spoke semi deep dish jeep wheels.

Good video mate... Just for reference, in case you didn't know. Here in Australia your Pickup is called a Hilux and ran from 88 to 97 for that body type. The only difference being that it's right hand drive and also we got the option of diesel. So if your still looking at getting the 4x4 guards/fenders for better wheel clearance and perhaps lowering the front again, look for parts for Hilux, 4Runner or for the Japan version of the 4Runner called a SURF which had all the extras as standard. The after market parts are not expensive at all. I'm currently doing a 92 4x4 dual cab upgrade myself. I have 2 Dual cabs a 4Runner and a SURF. Upgrading the Dual Cab Interior plus all power options and a turbo diesel from the SURF that all bolt straight in. Making 2 trucks out of the 4 that I have, so I'll have a Hilux/Pickup turbo diesel dual cab and a SURF/4Runner with a 3.8EFI V6 petrol/gas conversion that goes like a bat out of hell :). If you do go for the 4x4 Guards/Fenders make sure you get the inner plastic liner and corner lights as well because the 2 wheel drive ones are too narrow. . Look for Hilux LN106 parts. That's the Australian 4x4 version of your model and parts are cheap... If you need any help sourcing the parts or a cross referencing, just let me know.... Cheers :)

I'll tell you what I think..... Makes me wish I still had mine!!! Very clean and simple! Looks great bro!

Thanks for posting! I’d like to put on a set of 50 series tires on “17’s or “16’s for a better ride on a ‘94 Pickup but wasn’t sure how they’d look. This video helps a lot!

Looks Fantastic mate

Just saw you put this up on Craigslist. I just sold my 83 on Wednesday haha lookin to snag a prelude or accord sedan next. Too bad we never got to cruise them!

Dope video bro! And I’m about to get my hands on a 91! Looking forward to getting some crown Vic rims now!!

Just picked a bone stock 89 can’t wait to get a radio on her and start doing cool little mods, gonna do a full overhaul of the motor and interior this summer , want new seats and new carpet lol

i have a 86 i'm planning on getting it lower i will also put some crown victoria wheels. i was just using the truck for stuff that i have to do at home but after watching some trucks around i will definitely do some work on my.

Beautiful and simple mod

It has a clean look. Good job.

Those Crown Vic wheels look SICK!!

Sweet, love it!

Looking pretty clean man. It inspires me to lower my 94. Also white black bumpers.

I love it ❣️

🔥 u snapped

Looks great!!

Looks so good! :)

Love it

was just thinkn about these for my 2002 tacoma! looks good!

The crown vics or the starion wheels look great on these trucks. Real cool!

WOW this looks good. I'm gonna get these same wheels for my '94 2wd

Very clean very sweet good-looking

liking the Crown Vic wheels on it.

Looks good man

Hella clean

Looking good!

Those wheel fit that truck perfectly!

looks really good

Doing it right so far man..you're mini truckin!!

Love it!

looks awesome

What lug nuts did you end up using on the crown vic wheels? If you have a link or anything for them would be nice. I have the lug nuts from the stock steel wheels but doesn't seem like it grips the crown vic wheels enough for me to drive on them. I want to run them but want the right lug nuts for the wheels.

that white looks sharp!

Sick little Yoda. I miss my old girl I put the same wheels look dope

Dude heck yeah!

looks good man

looks good!

awesome mini truck

beautiful

Very nice yota sir looks really good with Crown Vic wheels

Very nice. I run Starions I repainted and polished myself on my pickup. I prefer mesh though.

Cool little truck👍

Kleen! Subtle!!!

Looks smart

sick PU! i had a 99 tacoma 2 dr 2rz i loved it!

Nicely done

Those rims set nicely on the truck.

very nice, good job. nice looking truck

Looks nice! My daily driver is a 93 Toyota pickup 🛻

Those r so cool

looks sick with those rims.

Truck is looking real good man! If you happen to do anything else to it definitely make a video.

I know you want to keep the daily cheap but I would seriously recommend sandblasting and powder coating those tims. the powder coat will help fill and nicks and scratches on the metal.

Ok thank you

looks nice bro

Clean!

Damn I can't believe you got those wheels for $90. I def need to go check out the junkyards this weekend.

This was my first vehicle, I found a old set of 5 spoke fittipaldi's by OZ for mine. Better than stock 14

Looks sharp man! I like those tail light lenses. I was thinking about ordering a pair for my truck but I can't really pick between those and the LED housings on ebay. The only thing holding me back from the LEDs are reliability; don't know if I really trust ebay electronics. lol

Clean!.... Gonna do something similar on my isuzu

Look nice bro ✔💯

unos buenos (estribos)no le caen nada mal brother!

I appreciate your time and effort. I purchased a finished 1987 with the drop drop kit already on it. I don't like the wheel sand tires, they stick out I want what you have. I just hit the curb and scratched the front pass side. would your set up work for me, I think yours looks great.

OMG, those look phenomenal! Totally forgettable on a Crown Vic, but awesome on the truck! I love mesh wheels!!! The mesh part might look nice if it were painted white to match the truck?

nice truck, i got the same lowering kit waiting to go on mine, do you have any rub issues with the 50 side walls up front? im thinking about goin 55 all around on mine

thanks

Hi there, on your 94 Tacoma when adding the Crown Vic wheels, which lug nuts did you use? Thanks

What size center can fit those rims?

1994 toyota hilux i have one my pops passed down to me 5 speed r22

I like it

perfect

Nice brother.

Clean

If you can get the wheels chrome and white would look nice on your truck Any plans for hydraulics or bags ?

I know this is an old post but I came across your video last week and I have a 91 PU that I just bought for commuting. Just curious on the offset of the crown vic rims you put on your truck. Those rims look beautiful on the truck.

good tip thanks

Damn dude clean, I got my 92 sitting in the garage faack make me want to work on it!

Jon !! Have u done center caps on truck yet ? I'm wondering how it looks I got same set up on my

Kudos to your wheel selection my friend. I enjoy how detail you are with your videos. How does she ride with your tire size? Do you have any rubbing either over a slight or hard bump? What type of lug nuts you use? Again, nice work on your videos homie.

Hey Jon I've got a 91 Toyota and I want flush fitment with no poke at all. I am going with a 15x8, what back spacing do you think I need to go with to not rub the strut and not stick out? I Have a 4 wheeler in the bed alot and my truck is lowered about 5 inches so I can't have any poke or I will rub bad. Thank you in advance man

Hey Jon can you teach us how you did that read disc conversion on your 1991 Honda Civic hatchback

wondering fitment on 99 5 lug

I'm sure you already have plans to do this, but i usually state the obvious. the next mod should be a new seat- my choice is a set of buckets and a console- and maybe get a 4runner wood dash (just my choice)...... but otherwise, VERY NICE JOB updating your daily driver and still keeping it useful.

looks hard bro ! and on the music ... hmmm let me guess , is that a Mr Fijiwiji remix ?

Dude! So nice, love the wheels! Why not silver face/polished lip? Would look sick.. White/silver/polish

Love your build. How did you get it to this set up? How did you lower it and any other mods

pimped looks real good

Nice Yota !! What size blocks did u use to lower the rear?

I wish I could find those wheels for $90. They look great!

my brother has the same exact truck same color. damn those Wheels do look sharp on that truck

Looks really good. How or what did you use to lower it?

lowering specs man this truck is awesome simple and clean