Here is a LINK to the BLADE SHARPENER used in this video! Thank you for supporting the channel! 👍 👉 LAWN MOWER BLADE SHARPENER (Used In This Video) amzn.to/3VoqJYE 👉LAWN MOWER BLADE SHARPENER - Another Version (Incase the link above is currently unavailable ⬆️) amzn.to/4bfr3yT

Five mowers? Impressive! I've always said, "He who dies with the most outdoor power equipment, wins."

Great Video..👍🏼 JB try using 60grit flapper disc won’t over heat & loose temper in blade

I have one of these and absolutely love mine. I’ve always angle ground but this makes a beautiful edge

Only level spot we have in the house to balance blades is on the kitchen countertop. She hasn't seen me do it or is ok with it. 😉Good video JB..

Great video ! I think I'll go sharpen my blades right now ( lawn domination !! )

I absolutely love Saturday mornings, coffee and Garage Gear review, what more can ya ask for? JB, your reviews are awesome brother. Whats weird is i put one of these in my Amazon cart on Tuesday. Ive been on the edge about this mainly because i only have my rider blades and pusher blades. Do you think ot would be a good investment for just 3 blades? One more question? What should a spark plug look like when you have a perfectly tuned trimmer or blower? Maybe you can make a video on a good looking plug and a poorly tuned trimmer/blower plug? Have a great weekend and week ahead my friend

Hey JB, good to see you in the garage again, just wanted to say hi and I will check this out. You make it look easy. Be Well my friend.

beware the knockoffs. the one i have is very flimsy aluminum and the main arm flexes when you touch the blade

I picked one up a few weeks ago - just need to mount it and sharpen up some blades!. Glad my knock off purchase will work well.

Thanks for another great review and tutorial. I bought the All-American last spring and really wondered about the quality of the knock-offs. I made a 2x4 mount to clamp in my old Black & Decker workmate so its portable works great! I even put a vertical piece on ine end and mounted my Oregon Blade balancer to it. Also, I use a Dewalt cordless grinder and yes, the batteries get "in the way", but as long as you keep the battery above the arms when grinding, it's a non-issue

Great tutorial and objective opinion! Love my grinder... and I'm a 30 degree guy for both of my mowers (Toro 21" recycler and 12 yr old Ferris 36" Belt Drive). Thanks JB!!

Never take more material off of the sharpened edge to balance the blade. Take material off of somewhere else on the heavy side like the backside of the blade.

Great video.. I just ordered that same sharpener from Amazon before checking you out..

Any issues with the bolt on the middle pivot backing out every you make a few passes? Tighten it to much and it won’t pivot, just tight enough to pivot and mine ends up walking out.

I have the All American sharpener. The thing is awesome. Great design, knockoff or not!

Dang. Just clicked on your link to purchase and got the “currently unavailable.” Message? Did you break the internet, JB, with your recommendation? In any case, I need one of these and hope they are available soon.

TY for Sharing

Hmm…. I might give this a shot. I’ve always freehanded my grinder, but this might be cool to play with… 👍🏻

Good info, as always JB 👍👍

Great video. I’ve always struggled with keeping my edges consistent with the angle grinder. This could be a game changer. Thanks Man!!

A great idea, 😊 !

Thank you

I just use a grinder w a sandpaper blade and I eyeball it. it’s never been a problem, should I not do it that way??

the best lawn blade sharpener is a hand file

Dang, it’s sold out on Amazon

I'm in for one once it's back in stock. Curious what angle JB would use on his new super recycler, 21564. 30 still?

Some say a bench grinder is best, others just use the angle grinder with a flapper disc.. now everyone has its own favourite but I Think I take a look at one of these sharpeners

Old school vice and a file and when I have the option I buy American every time no judgment but that’s just me

I have the $10.00 HF angle grinder mentioned and use coarse flap wheel to sharpen mine. You clamp the blades down and push the flap wheel over its edge. Very easy to hold at the same angle and it takes little time, I see no reason for the guide unless you sharpen very often or have many blades to sharpen. I sharpen 5 blades nut once a year. Used to use a bench grinder; and angle grinder is a better way.

I might have to check that thing out!

Too funny! I literally got the Amazon model YESTERDAY but haven't set it up yet so the timing of your video is PERFECT! Thanks for the additional tips & tricks at the end. Much appreciated, nicely done and thanks for this!

Great video. Just remind me of doing mine 🙏👍🙏You rock JB👍👍👍👍

Belt sander always worked enough for me.

great video JB

Will we need an adapter for the Honda dual mulching blade?

Just buy it and raise the yard prices to pay for it 😊😊😊😊

Great video! Do you recommend spraying a layer of paint on the newly sharpened blades for storage? I have 4 sets of blades and obviously can't use them all at once.

I got one. Works great. Did a video on one also. 💪🏽

Hey JB, I sharpen my blades every 2 weeks or so. I have about 3 acres to work with. Thumbs up.

Thank you for the video good tool to have

No need in sharpening my blades. Have to replace them twice a yr. Sand grinds them to nothing

OK. Good review. But it is not _"the same exact thing",_ if it was all the guide pins would be good, not kinda good.

Great video!! Looks like Rwood and Foxhunt :-)

Let’s not forget once you own one of these you’ll be the blade sharpening expert in your neighborhood. Charge $5 a blade to your neighbors and you’ll have it paid off in no time.

Good video and I like the comment about the prices, I agree, sometimes we just can't afford the cost of the name, whether is USA or Foreign. I'm still researching the blade sharpener, the knock off blade balancer is junk, even though a you tube video gave it a good/ or "same as" review.

👍

I have the All American Sharpener and absolutely love it.

The knock off I bought was garbage, very loose tolerances, not stainless. I bought the real deal, much better quality. Buy direct from factory for a cheaper price. No where near 4-5 times the cost as stated.

I got in the habit of always having a spare blade for my mower (currently an 80v Kobalt, which has been working great for the past 5 years). That way I can sharpen the spare blade and have it ready to swap at a moment's notice so I can mow when I want and sharpen the blade when I want. I also always put a little oil on the freshly sharpened blade to help prevent rust, but that's not a big deal.

No judgement here JB. I tried to get one of those knockoffs… twice. Both times the unit showed up either missing parts or it felt super flimsy. I ended up getting the All Americ. Based on your video, looks like you found a winner. Regardless of manufacturer, these jigs are a massive help. I used to dread that job… not anymore. I found 35 degrees matched my blade best. Great stuff!!

JB. I love your videos. I have a lawn care business and I'm planning on buying McLane edger to help my business. I have a riding lawn mower and you videos helped me service it and wash the deck. Love your videos. Keep it up!

USA first

Super detailed video as usual. Thank you :-)

Currently unavailable

My grass destroys my blade in 1 cut. 1/3 acre minus 2200 sqft house

Nice review, not American but I get it.

Love that you're using a Harbor Freight grinder. That's the only grinder I own. I use it for projects like this... and not very often. I think I paid $10 for them back around 15 years ago. Goes to show that sometimes a cheap tool is all you really need, and that throwing $50 or $100 at a tool can be wasteful.

Really great instructional video JB! You make it look simple. Even new blades that state, don’t need sharpening, actually really do. I’ll bet your getting some great use of your pool this past week! What’s up for the weekend? Cheers neighbor!

Great video JB! I was looking at getting one but was a little leery. I'll order one now, "thru the link in the description"! Just a tip for you, always put the grinding wheel/disc facing up, grandfather told me that years ago. Never asked why but I'm sure there is a reason.

I love mine, it's about 2.5yrs old. My lawn buddies be wanting me to sharpen their blades. I had 36" Bobcat, 32" Ferris, Husqvarna 800Awd 22", Honda 21" I do them 2x month

that's not a sharpener, just a guide.

Question: if your putting your mower away for winter, is it advisable to coat the blade with say like a wd40 type product to keep it from rusting or is it ok to just clean the mower deck with a garden hose and put her away for winter?

If your battery gets to in the way, flop the bar around so that the angle faces forward on the arm that moves, instead of back towards you, if that makes sense like the way. So he middle of the guide bar is pointed at you, if you flopped facing away, like the way your knee goes, it’ll be out-of-the-way of your grinder battery.

Great video JB, I had ordered my All American a couple of weeks ago. I did look at the one you just reviewed and now I think I should have saved the money. Haven’t given this a try yet because I wanted to find a good video and now I have one! Thanks again!

I have a question I started sharpening with the new sharpener I got from Amazon and I set it at a few different angles and it's grinding half the blade I'm not sure what is going on or maybe the blades I have are just so bad but I'm not sure can you help

As they always say you get what you pay for

My argument wouldn't be just the "buy American" argument, but rather the blatant stealing of someone else's IP.

Steal of a deal for a great sharpener.

Your not building a rocket.By time you set all that up I'll have sharp blades at the right angle always 30 degrees. I guess some people has more money than common sence.