Is destilled water better?

@@HerbertSimonDachs Distilled water didnt seem to have any different effect in experience

@@Maskeddude Thank you! 😊

Can you help me I am having issues with my surface tension I am using 1:1 mix heating to 160f applying on clear coat sanded to 600 also tried 800

@@anthony_trillanes the way it works is, you put a first coat down of what ever bright/reflective paint/primer you want (the crystals dont stick to metal too well on their own and will make the piece look patchy when you wipe them away), cover it in the crystals, let them dry, then do a light dusting of your black paint over top. You dont have to go on heavy with the black, you want to allow the crystals to aid in the "shading". The crystals are water soluble, so you dont need to sand them hard or with any rough abrasive, a wet sponge will do the trick. What happens is, the paint adheres to the crystals and when you wipe them away, it reveals the bright/reflective base underneath. The thicker the crystal, the more black paint will adhere to it. The thinner the crystal area, the greater chance the paint will adhere to the base coat instead and thats what gives you the shading effect.

Sorry for bad english

Your english is fine Bro! Thanks again for the video!

I didn't get the receipe

What color did you use

Thank you..sorry for bad english..

Cuáles son los ingredientes

Sílvio Roberto poder traduzi pra min

Sílvio Roberto poder traduzir pra min

It takes minimal effort really to set it all up and try it. Idea start there first then of it doeant give you the desired outcome look for answers. 🤷‍♂️ If its Urea it should work. If its granulated try breaking it up into a powder. In thinking the only disadvantage will be the time it takes to break it down in the water. The bigger the granules/ pellets, the longer it will take too dissolve. You cant just use more heat to do it either because it will evaporate the Urea. Try breaking it up and fallowing his steps here. Good luck

Ya..that it is

Hi there , yes when add water, the solution react and temperature drops, tha's why you have t to heat the water. You can make simple, just add "heated" water in a water bottle 500ml in a half of urea and shake it until all been disolved. That's it!

Oh yes..that's another simple way..thank you

Awesome thanks a lot !a

Ya, when you heat it, that will grow large pattern

Bro what is powder name

@@shaikirfanroyals3418 urea

@@KM-fckutube where did get this sir.

@@KM-fckutube what is urea? What does it mean in Turkish, which product😊

I think not work, will work if you paint it outside

Let it dry under sun, try it

It works

Noo one n the same

Urea

Try it yourself, but that is not a problem sanding it or not. Thank you 🙌

It works great either way😊

Just wait for normal temp solution and ready to use..

when I mix the ingredients the mixture becomes very cold. that is, I had to wait for the mixture to warm up? and then i use it?

Just aerosol paint

Choose yourself, and must use top coat.

Thanks for reply ! I had some more questions. Do I need to sand the clear coat and does it require sunlight to dry ? Does it dry under shade ?

No, if your result showing nice and smooth surface, and you can dry it with sunlight or just shade. You can see technical information at the package of your clear coat

I think 100% safe, cause this just water and urea. Oh.. Great.. We have same hobby.. 😁

@@GarasiPaintwork that's good to hear you're into gunpla to. By the way, the black paint you used after the crystals were formed, is it normal black or clear black?

Ya just normal black

@@GarasiPaintwork I tried it and it worked, but left it for a few hours then the effect evaporates. Is that normal?

After apply solutions to your project, dont left it too long, when the fx are formed you can directly spray your black. Ya, it's normal even your fx will gone..

I think your solution is too hot, but keep in try.. Stay safe

not really, heating it up is to just to increase the solubility of the urea. use a 1:1 ratio of urea and water, so 100ml water use 100g of urea. for best results use ox gall, or any other good surfactants.

@@Thisniggatrippin Ok, thankyou

Ya urea for plant fertilizer

@@GarasiPaintwork very thanks my friend

Link?

Yess of course

Garasi Paintwork oke makasih

No..after silver you can puy this solution

@@GarasiPaintwork Thank you will try tomorrow only one more question when you heat solution to what temperature do you want it ?

Just like room temperature, or you can just use warm water

@@GarasiPaintwork thank you

Urea. Most common fertilizer in the world. It's in human urine as well :)

@@pierrex3226 Поздрав из Бугарске, брате. Овде у БГ ово зовемо "карбамид" или "поликарбамид". Продају га као вештачко ђубриво. Опростите ми ако имам грешку. Користим гоогле транслате, иако су нам језици веома блиски. Поздрав брате! Желим вам добро здравље!

I use standart urea fertilizer..

@@GarasiPaintwork so the best place to find it is on a agriculture store..?

Yup.. That's right

You just can use regular dishwashing soap at home

@@GarasiPaintwork thank you ,but i think you misunderstood my meaning ...i mean ,why you put the dishwashing soap in?

Home depot store

Selama ini gak ada batas waktunya bang...

Mgkin terlalu lama keringnya mas, coba dijemur...

Gak basi bg..

berarti bisa dipake untuk terus ya bang. oke bg. thanks ilmu nya

Coba dijemur dipanas bg..krna yg pernah saya coba..klo di diemin aja tanpa dijemur, memang jadi nya kecil2

padalah pake hedraiyer bang

Fertilizer you can get on grocery store.

Nitrogen fertilizer ?

Yes that is

Thank you sir , 🤘

Secukupnya aja mas...

Pupuk urea apa aja bg

Sama aja mas..

+Honda EG itu pupuk tanaman mas

Yess

Yes you right

@@GarasiPaintwork really? 🤔