These guys are the dogs nuts, I built my dream mancave(pub) 6m x 4m and these guys provided most of the information on how to do it properly. Thanks guys for giving me and family a great place to chill and to av big parties .. ❤️

Always love watching the masters at work!!! Liam and the dream team keep them coming 💪

Liam, informative with humour as always! Thank you

Love watching your builds thank you 🙏

I want to say thank you because without this channel i would not have build my office . Athough I used LGSF your openness with skills pushed me forward .

This is the best video i have found that actually shows you what you SHOULD be doing. I have to replace a wall on a summerhouse, i will be following this exactly.

Love the hair Jen 🤩

Jen is amazing

Brilliant so good to watch you no you’re stuff with out adout and great to see Jen on camera not just for her looks but agreat trades women which is abreath of fresh air in the building industry

Years of experience makes it look so easy. Massive round of applause here

I’ve built my gardenroom thanks to your help! I did 2.1m doors but had to do joist hangers and a ladder frame to keep under the 2.5m ! Still enjoying watching the masters at work tho 😎

Jen in full beast mode on the saw!

Beautiful work. The notched noggins are a game changer for me!

Great video would be handy if a list of materials was put in description but I know being busy might not have the time but nice work 👌

Good morning Liam and the team I love your videos keep postinglove ❤❤❤

I just found your channel & I’m loving it. Stayed up till 1am last night watching your videos (instead of finishing the jobs I should be doing in my own house!) 😂 Keep up the good work!

0:40 as Meatloaf said, 'you took the words right out of my mouth'. He is young with a flexible back, us with grey hairs have backs as flexible as railway sleepers. Great video👍👍👍🔱🔱🔱.

I'm doing all of this now, but this video is giving me weather envy.

Just love these videos, I always see a new method of doing the same job. And the video style is getting artistic, at 6:52

I’m only here for the hair , beautiful 😮

Jen is on fire 🔥 here ..

Another fab video, Thanks

That was brilliant....you explained it so thoroughly,thanx..😁👍

thank you for building warm rooms for the local community

Thank you very much for the info, I am building my own and need any bit of help as I can have, unfortunately I didn't get a lot of info from your video, because my head was with Jen, Jen is amazing ! 😂

Brilliant great to watch as always

Your description of Jens face installing the screws play ground humor at its best. Jen please get some knee pads I'm in my 50's and as a spark mine are shot. Great Video

Great video, full of information, great stuff.

Great vid Liam Guys are spot on as usual. Jen…. You stole the show … Liam it seems like you head off a lot these days 😂😂😂 guys work fast while yer gone 😂 great work

great video dude.

Professional working always 🌟🙏❤️ I wish have one summer house in my garden in the future but can’t afford it 😅 thank you for sharing

I was thinking of using SIP panels for a small project, but this video has changed my mind - I love how this guy explains things - he's a star.

Keep up your great work , love your open honesty 👍

Top work lads and ladies 👌🏻👌🏻👌🏻

Usual great Video, Davey is a cracking cameraman..

Splendid video as alwaysa every time with you looneys lol

Good to see you back in action.

grat job guys Gary from Crewe 👍👍👍👍

Superb 👌🏼👏🏼

Very interesting video's! thanks for all the effort!

Love it and has given me some confidence in tackling this, this Spring. What steel is it you used. Was it Aluminium so the screws would secure. Thanks. Subscribed.

GREAT STUFF

Very good volg 👍👍👍👍🇬🇧🇬🇧

Hi Great vids and so informative, do you use treated or non treated timber Cheers

Really enjoyed watching , would u let me no best place to put air vents... but got to say a honest video to the point helpful and best thing is sharing having that heart well done great team work

“Jen’s screwing face” 😂😂😂

6.59 that flick/look 😍

i note the way you sail the osb past the meeting points on both horizontal and verticals to reduce the number of joins and avoid entertaining the use of unsightly capping sections later on.... going to steal that idea with thanks and respect.

Is there a 2nd video to this? Interested in the sheet metal cladding on the back.

Cut an old hand saw down to about 5 inches to use as a scraper mate it works a treat for that!! 🤜🏻

Kudos to the camera man... excellent work at 07:00 minutes in.

top job

hi great video but when carpenters build frames we put 2 head plates in, to span the join. and just a pair of crippie studs under lintel, not some dinky panels. 😀

Thank you for doing videos . You make look easy but it's not. Everything has to square up. Your team is awesome super experienced to work nd explain its hard work as well .

Amazing work. Quick question... what's the thickness of the osb boards?

Hi Liam, Can you give some info on the max roof spans, with the different timber sizes and flint beams?

Calm down, take your time 😊. Speed don’t make no difference. Your squad get confused when your asking stuff to quick. Jen clear the base, yeah I’m just doing this first!!! Give them time not going 100 mile an hour. Makes for a better video. Time is money but speed not always the best. 👍

What timbers are you using for the studs and what height do you make your wall frames. please

These videos are top notch and full of useful info for anyone else doing a build. I'm interested though as to why you don't do a Birdsmouth cut on the roof beams to help them sit flat on the wall plates. Is the angle of the roof shallow enough that it's not required?

Damn what kind of powerteam is this, I have seen construction sides with less muscles used as you guys ( and gal)

Great builds BUT any slight water ingress into all that OSB will be disastrous to the build in future

Decent

That's Jen's screwing face 🤣🤣🤣

Great vid. Can someone tell me the height of the front and back walls please? Sorry if it’s there but I missed it😬

Rhomboid😂😂. Trapazoid, i like it

I'm about to commence a build in a field and I'd like the walls and roof clad in black corrugated metal sheets. I don't have any height restrictions so I would like a warm roof construction (18mm osb, vcl, 100mm PIR, 11mm osb). I'm wondering what I attach my metal sheets to. Do I need to batten on top of the 11mm osb? Do the batten fixings need to reach a joist? If so they will have to be 200mm screws!! I think that's what's causing me to question this plan. If so should I counter-batten as well for more ventilation? Metal sheets get cold so I guess they will have condensation underneath? I don't really want the rubber roof look but if I have to I will. Thanks in anticipation of a reply 😎

Hi guys, great videos. I’ve been watching lots of your videos today to get some tips and advice. May I ask where to get the 24mm threaded bars you use for the base? Also, the nuts and the plates?

Hi there i was wondering if moisture wicks up the sterling board laid that low to floor. I was going to start it 90 cm from floor ?

Is the metal cladding for the back, specced out in the build pack? I'm gonna need that and these rails that you've added.

I’m glad I learned how to frame in USA

Hi guys - what grade steel are you using? Will mild steel suffice?

Hi liam keep it up you and the team Jennifer you are all mega superstars ali walsall west midlands england junction 10 m6 Walsall churckery

Gem, excuse me, Gen doing most of the actual work

Another good one. Can I pick your brains please fella. What would your base details at floor level if I was building off a concrete slab as opposed to on ground anchors and where would you place the insulation. You maybe already have a you tube on file fella. Also who do you buy your rubberroid roofing off bud.

what dimension of profile are the studs?

450 centres gives 400 gap/insulation which divides into 1200. Minimum Waste/Cutting. (Courtesy Robin Clevett.)

👏👌👍

Thankyou

Hi Liam, what nails are you using in the guns for wall OSB fixing? Is 50mm 18g brad nail ok for the job? I'm thinking of buying a nail gun. I take it 1st fix gun is heavier duty

Hope that joint is staggered chippy too chippy 👍. And mind your fingers on the De Walt , over hand planner got me .... nipped the tip off my thumb and first finger off when I was rushing as an apprentice back in the 80s , nice job though gent's... just slow down 👎👇. Learnt my lesson 🤢owch.

Do you not use the kingspan insulated panels for roofs anymore? They looked pretty good I thought.

Jens “ screwing face” tbh that’s not how I remember it !, Oh hang on a minute, I was dreaming!!😂

Hi, have you done a video about installing composite decking? Can you send me a link please. Steve

"Oh balls!" 😂😂

I ordered the build pack how long does it usual take to be sent over?

Best using mask I think

Sorry I have a question, which you may have answered already. Should you use C16 or C24 for your carcass please?

he had me at Rhomboid

The moment he thought I’ve made it…then everyone got bored of summer houses 😂

If i am using screws on the metal sheeting do I need to battern it out or fix to osb and studs? Thanks!

Tell jen to get some knee pads on. She'll miss those knees when they are knackered

Is the roof timbers 6x2?

Great job but making more work for yourselves. Why rip every board? Just set uprights to the boards 🤦‍♂️

Does it matter that the osb is exposed for a few days before covering on the inside?

Looks a nice house you are working at, where are you?

That ain't a rhomboid that you drew mate, it's a parallelogram

Did they forget the thickness of the OSB for the overhang of the side wall?

Are your walls 1950

The fixing of the walls to the floor needs more nails

👏🇬🇧🇬🇧👍👍⭐️⭐️⭐️⭐️⭐️🍺🍺🍺