Garmin Marine Webinars: GPSMAP Series Traditional Sonar Features

No video

Garmin Marine Webinars: GPSMAP Series Traditional Sonar Features - Part 2

Рет қаралды 52,817

Garmin

Күн бұрын

Пікірлер: 23

@sabaruddinrahman8756 10 ай бұрын

I have Garmin 585 and Aquamap 80xs. Is there any video explain how to obtain the depth data from Aquamap 80xs? I have success for 585.

@briankeevan8134 2 жыл бұрын

Hello, how do I speed up the sounder scroll speed on my Garmin 8612’s? I’m usually fishing in 120’ of water, & the target structure will still be slowly scrolling across the screen sometimes several minutes after I’ve passed over it. Any help would be be greatly appreciated.👍🏻

@daves8812 2 жыл бұрын

I have a 943 xsv with a Airmar 1kw thru hull ducer that loses bottom once I'm offshore in 1000+ft. How do I limit my sonar return to just the upper 500ft of the water column? I am trying to target Bluefin, yellowfin, yellowtail and dorado

@1950shot 4 жыл бұрын

Good information. I really appreciate it!

@brianbartos6388 4 жыл бұрын

THX for walk thru

@tomdenapoli5313 4 жыл бұрын

Excellent overview of the settings. Can you guys put something together on customizations for different situations as pre-sets? ie. bottom-fishing setup, cruising setup with 2 transducers, contour fishing etc. I see a couple of presets from the factory but don't know *why* various settings would be used in diff situations.

@GarminInt 4 жыл бұрын

Hi Tom, Thanks for sharing your thoughts and ideas! Please be sure to officially submit your ideas and request to our innovators through this portal: www.garmin.com/ideas -MR

@heligeorge 3 жыл бұрын

Hi. There is a grounding screw on the back of the GPSMAP 8410 xsv. It is recommended to run a wire from the screw to the engine anode on the transom. What is your opinion on the matter . Thank you.

@GarminInt 3 жыл бұрын

Hi George, thanks for your question. Yes, that is a recommendation, and we support that recommendation. -MR

@patdoherty3528 3 жыл бұрын

Hi i cant find answer anywhere, does bottom lock flatten seafloor removing appearance of waves? i fish in ocean in western australia. i should add my unit is on order hence the question

@GarminInt 3 жыл бұрын

Good evening Pat, Bottom lock only locks the screen to follow the contour of the bottom. It doesn't flatten the seafloor. -MR

@MenCanNotBeWomen 4 жыл бұрын

All settings are done on fresh water, not salt...

@johnmeyer6721 2 жыл бұрын

How do I change my 7sv to metric.

@salvatoregagliardi48 3 жыл бұрын

Do you have a side scan settings video for the 126SV Ultra?

@GarminInt 3 жыл бұрын

Hi there! We don't have a video on that one. There may be another KZfaq channel with that video. We'd love to get your video ideas to our innovators! Please share your ideas through this portal: www.garmin.com/ideas Thanks! -MR

@kimpline 4 жыл бұрын

this was very helpfull but i still dont know how to identify, mud/sand/rock...could someone please help me ?

@GarminInt 4 жыл бұрын

Hi Mehmet, Harder targets are going to show the strongest returns in the red color. The thicker the red return, usually the harder the bottom is. If you'd like to discuss this in further detail, our marine support team is available at the following link: bit.ly/GarminContact-US Thank you -MR

@johnmeyer6721 2 жыл бұрын

Hi,how do I change my 7sv from feet to metric ,thank you.

@GarminInt 2 жыл бұрын

Hi there! You'd be able to change it by selecting: Settings > Units > System Units > Metric -MR

@neetpirate 2 ай бұрын

Will you please get a better microphone and record these videos somewhere besides your house bathroom

@ginoyjacob3708 3 жыл бұрын

Cannot find fish symbols on GPSmap XSV..

@GarminInt 3 жыл бұрын

Hello Ginoy, please make sure the unit software is up to date. If issues persist, please get in touch with our marine support team at the following link: bit.ly/GarminContact-US Thanks -MR